Connect Version History
UpdatedThis article helps you keep track of the versions that have released and the changes in those versions.
Daily.Entra.NewsApril was overwhelmingly a documentation-maintenance month: 3,252 items were updated, compared with 10 new items, alongside eight removals and three Message Center notices. The meaningful exceptions were a Workload ID support-removal signal, an Entra Connect application-identity authentication path, an explicitly preview Conditional Access optimization agent, and an announced general-availability milestone for Entra hybrid join in Power Automate hosted machine groups. Most other edits were clarification, troubleshooting, tutorials, or security and user-experience guidance; the supplied removal entries do not establish additional product retirements.
An updated Workload ID guidance item says service principal-less authentication will no longer be supported from March 2026, with remediation required by 31 March 2026 to avoid application authentication failures. The supplied mitigation sequence is to verify access, create an enterprise application, and verify tokens. Because the evidence does not define the complete scope, treat this as an affected-application remediation signal rather than proof that every workload must change.
The April announcement sets general availability for Entra hybrid join for Power Automate hosted machine groups on 31 May 2025. This is an explicit availability milestone, not merely a newly edited Learn page. The supplied evidence gives no additional prerequisites or migration steps.
Revised guidance describes an application-based alternative to the connector account’s locally stored password, using an Entra application identity and OAuth 2.0 client-credentials flow. Entra Connect creates a single-tenant third-party application in the customer tenant; later guidance frames the rollout around a certificate-based application identity. The record does not label this capability preview or generally available and does not require all existing connectors to migrate.
New and updated pages identify the Conditional Access optimization agent as being in preview. It recommends policies and changes aligned with Microsoft’s Zero Trust guidance; its documented preview scope covers MFA requirements, device controls such as compliance, app protection policies, and domain-joined devices, as well as blocking legacy authentication and device code flow. Setup begins with View details and Start agent. No GA or mandatory tenant-wide rollout is established.
A new Protecting Tokens in Microsoft Entra ID article addresses token theft and replay, but the evidence presents it as security guidance rather than a new token-protection control. Updated mandatory-MFA pages add verification, lockout, and postponement procedures. Separately, Message Center describes an automatic change to the More information required registration interface from late April through late May and a new Authenticator Lite and Authenticator app message telling users to refresh notifications when no…
Identify applications using the affected Workload ID authentication mode and follow the documented remediation path—verify access, create an enterprise application, and verify tokens—before 31 March 2026. Entra Connect owners should review the application-based flow, but the evidence supplies no universal migration requirement or GA label; manage the created application or service principal and certificate only if that path reaches their deployment. Treat the Conditional Access optimization agent as preview and follow its setup guidance. If the Power Automate hosted-machine-group capability is in use, track 31 May 2025. Registration and Authenticator sign-in UI changes roll out automatically; notify users and update local instructions, while the Message Center notices require no admin-drі
This period briefing was generated by AI from the tracked Microsoft Learn and Message Center changes.
This article helps you keep track of the versions that have released and the changes in those versions.
author: joflore
> [!WARNING]
author: rolyon
author: rolyon
| Environment | URL |
| App | URL |
| **Sign-on URL** |

To configure the integration of ADP Globalview (Deprecated) into Microsoft Entra ID, you need to add ADP Globalview (Deprecated) from the gallery to your list of managed SaaS apps.
Organizations can choose to update their policies using the following steps.
To configure the integration of LaunchDarkly into Microsoft Entra ID, you need to add LaunchDarkly from the gallery to your list of managed SaaS apps.
* A recommended minimum version of macOS 14 Sonoma. While macOS 13 Ventura is supported, we strongly recommend using macOS 14 Sonoma for the best experience.
author: MicrosoftGuyJFlo
Once you complete your terms of use policy document, use the following procedure to add it.
To configure the integration of ADP into Microsoft Entra ID, you need to add ADP from the gallery to your list of managed SaaS apps.
To configure the integration of AppNeta Performance Manager into Microsoft Entra ID, you need to add AppNeta Performance Manager from the gallery to your list of managed SaaS apps.
To configure the integration of FortiGate SSL VPN into Microsoft Entra ID, you need to add FortiGate SSL VPN from the gallery to your list of managed SaaS apps:
To configure the integration of MongoDB Atlas - SSO into Microsoft Entra ID, you need to add MongoDB Atlas - SSO from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
To configure the integration of Adaptive Insights into Microsoft Entra ID, you need to add Adaptive Insights from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
To configure the integration of Asana into Microsoft Entra ID, you need to add Asana from the gallery to your list of managed SaaS apps.
To configure the integration of Ascentis into Microsoft Entra ID, you need to add Ascentis from the gallery to your list of managed SaaS apps.
To configure the integration of Beeline Enterprise into Microsoft Entra ID, you need to add Beeline Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Bizagi for Digital Process Automation into Microsoft Entra ID, you need to add Bizagi for Digital Process Automation from the gallery to your list of managed SaaS apps.
To configure the integration of Brocade SANnav Global View into Microsoft Entra ID, you need to add Brocade SANnav Global View from the gallery to your list of managed SaaS apps.
To configure the integration of Brocade SANnav Management Portal into Microsoft Entra ID, you need to add Brocade SANnav Management Portal from the gallery to your list of managed SaaS apps.
To configure the integration of Ceridian Dayforce HCM into Microsoft Entra ID, you need to add Ceridian Dayforce HCM from the gallery to your list of managed SaaS apps.
To configure the integration of Change Process Management into Microsoft Entra ID, you need to add Change Process Management from the gallery to your list of managed SaaS apps.
When subscribing to the Cirrus Identity Bridge for Microsoft Entra ID, you are asked for your Microsoft Entra TenantID. To view this:
To configure the integration of Civic Platform into Microsoft Entra ID, you need to add Civic Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Cloud Academy into Microsoft Entra ID, you need to add Cloud Academy from the gallery to your list of managed SaaS apps:
To configure the integration of Condeco into Microsoft Entra ID, you need to add Condeco from the gallery to your list of managed SaaS apps.
**To add EmpCenter from the gallery, perform the following steps:**
To configure the integration of Microsoft Entra ID with E Sales Manager Remix, add E Sales Manager Remix from the gallery to your list of managed SaaS apps by doing the following:
To configure the integration of GitHub Enterprise Cloud - Enterprise Account into Microsoft Entra ID, you need to add GitHub Enterprise Cloud - Enterprise Account from the gallery to your list of managed SaaS apps.
To configure the integration of Gradle Enterprise into Microsoft Entra ID, you need to add Gradle Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Graebel Single Sign On with globalCONNECT into Microsoft Entra ID, you need to add Graebel Single Sign On with globalCONNECT from the gallery to your list of managed SaaS apps.
To configure the integration of Grammarly into Microsoft Entra ID, you need to add Grammarly from the gallery to your list of managed SaaS apps.
To configure the integration of Granite into Microsoft Entra ID, you need to add Granite from the gallery to your list of managed SaaS apps.
**To add Gra-Pe from the gallery, perform the following steps:**
To configure the integration of Greenhouse into Microsoft Entra ID, you need to add Greenhouse from the gallery to your list of managed SaaS apps.
To configure the integration of Greenlight Compliant Access Management into Microsoft Entra ID, you need to add Greenlight Compliant Access Management from the gallery to your list of managed SaaS apps.
To configure the integration of Greenlight Enterprise Business Controls Platform into Microsoft Entra ID, you need to add Greenlight Enterprise Business Controls Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Greenlight Integration Platform into Microsoft Entra ID, you need to add Greenlight Integration Platform from the gallery to your list of managed SaaS apps.
To configure the integration of GreenOrbit into Microsoft Entra ID, you need to add GreenOrbit from the gallery to your list of managed SaaS apps.
To configure the integration of Grok Learning into Microsoft Entra ID, you need to add Grok Learning from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Groups Administrator](~/identity/role-based-access-control/permissions-reference.md#groups-administrator).
To configure the integration of Grovo into Microsoft Entra ID, you need to add Grovo from the gallery to your list of managed SaaS apps.
**To add GTNexus SSO System from the gallery, perform the following steps:**
To configure the integration of gulfHR SSO into Microsoft Entra ID, you need to add gulfHR SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Guru into Microsoft Entra ID, you need to add Guru from the gallery to your list of managed SaaS apps.
To configure the integration of HackerOne into Microsoft Entra ID, you need to add HackerOne from the gallery to your list of managed SaaS apps.
To configure the integration of HackNotice into Microsoft Entra ID, you need to add HackNotice from the gallery to your list of managed SaaS apps.
To configure the integration of Halosys into Microsoft Entra ID, you need to add Halosys from the gallery to your list of managed SaaS apps.
To configure the integration of HappyFox into Microsoft Entra ID, you need to add HappyFox from the gallery to your list of managed SaaS apps.
To configure the integration of Harmony into Microsoft Entra ID, you need to add Harmony from the gallery to your list of managed SaaS apps.
To configure the integration of Harness into Microsoft Entra ID, you need to add Harness from the gallery to your list of managed SaaS apps.
To configure the integration of Haystack into Microsoft Entra ID, you need to add Haystack from the gallery to your list of managed SaaS apps.
To configure the integration of hCaptcha Enterprise into Microsoft Entra ID, you need to add hCaptcha Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of HCL BigFix Platform into Microsoft Entra ID, you need to add HCL BigFix Platform from the gallery to your list of managed SaaS apps.
To integrate Citrix ADC with Microsoft Entra ID, first add Citrix ADC to your list of managed SaaS apps from the gallery:
To configure the integration of Headspace into Microsoft Entra ID, you need to add Headspace from the gallery to your list of managed SaaS apps.
To configure the integration of Health Support System into Microsoft Entra ID, you need to add Health Support System from the gallery to your list of managed SaaS apps.
To configure the integration of Helper Helper into Microsoft Entra ID, you need to add Helper Helper from the gallery to your list of managed SaaS apps.
To configure the integration of Help Scout into Microsoft Entra ID, you need to add Help Scout from the gallery to your list of managed SaaS apps.
To configure the integration of Helpshift into Microsoft Entra ID, you need to add Helpshift from the gallery to your list of managed SaaS apps.
To configure the integration of Heroku into Microsoft Entra ID, you need to add Heroku from the gallery to your list of managed SaaS apps.
To configure the integration of HeyBuddy into Microsoft Entra ID, you need to add HeyBuddy from the gallery to your list of managed SaaS apps.
**To add HighGear from the gallery, perform the following steps:**
To configure the integration of HighGround into Microsoft Entra ID, you need to add HighGround from the gallery to your list of managed SaaS apps.
To configure the integration of Hightail into Microsoft Entra ID, you need to add Hightail from the gallery to your list of managed SaaS apps.
To configure the integration of Hirebridge ATS into Microsoft Entra ID, you need to add Hirebridge ATS from the gallery to your list of managed SaaS apps.
To configure the integration of hireEZ-SSO into Microsoft Entra ID, you need to add hireEZ-SSO from the gallery to your list of managed SaaS apps.
To configure the integration of HireVue into Microsoft Entra ID, you need to add HireVue from the gallery to your list of managed SaaS apps.
To configure the integration of Hive Learning into Microsoft Entra ID, you need to add Hive Learning from the gallery to your list of managed SaaS apps.
To configure the integration of Hive into Microsoft Entra ID, you need to add Hive from the gallery to your list of managed SaaS apps.
To configure the integration of ContractS CLM into Microsoft Entra ID, you need to add ContractS CLM from the gallery to your list of managed SaaS apps.
To configure the integration of Hone into Microsoft Entra ID, you need to add Hone from the gallery to your list of managed SaaS apps.
To configure the integration of Honestly into Microsoft Entra ID, you need to add Honestly from the gallery to your list of managed SaaS apps.
To configure the integration of Hootsuite into Microsoft Entra ID, you need to add Hootsuite from the gallery to your list of managed SaaS apps.
To configure the integration of Hopsworks.ai into Microsoft Entra ID, you need to add Hopsworks.ai from the gallery to your list of managed SaaS apps.
To configure the integration of Hornbill into Microsoft Entra ID, you need to add Hornbill from the gallery to your list of managed SaaS apps.
To configure the integration of Hosted Heritage Online SSO into Microsoft Entra ID, you need to add Hosted Heritage Online SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Hosted MyCirqa SSO into Microsoft Entra ID, you need to add Hosted MyCirqa SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Hosted Graphite into Microsoft Entra ID, you need to add Hosted Graphite from the gallery to your list of managed SaaS apps.
To configure the integration of HowNow WebApp SSO into Microsoft Entra ID, you need to add HowNow WebApp SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Hoxhunt into Microsoft Entra ID, you need to add Hoxhunt from the gallery to your list of managed SaaS apps.
To configure the integration of HPE Aruba Networking EdgeConnect Global Enterprise Orchestrator into Microsoft Entra ID, you need to add HPE Aruba Networking EdgeConnect Global Enterprise Orchestrator from the gallery to your list of managed SaaS apps.
To configure the integration of HPE Aruba Networking EdgeConnect Orchestrator into Microsoft Entra ID, you need to add HPE Aruba Networking EdgeConnect Orchestrator from the gallery to your list of managed SaaS apps.
To configure the integration of HPE Aruba Networking EdgeConnect Service Provider Orchestrator into Microsoft Entra ID, you need to add HPE Aruba Networking EdgeConnect Service Provider Orchestrator from the gallery to your list of managed SaaS apps.
To configure the integration of HPE SaaS into Microsoft Entra ID, you need to add HPE SaaS from the gallery to your list of managed SaaS apps.
To configure the integration of HR2day by Merces into Microsoft Entra ID, you need to add HR2day by Merces from the gallery to your list of managed SaaS apps.
To set up the integration of InsideView into Microsoft Entra ID, you need to add InsideView from the gallery to your list of managed SaaS apps.
**To add Jobscience from the gallery, perform the following steps:**
To configure the integration of OneTrust Privacy Management Software into Microsoft Entra ID, you need to add OneTrust Privacy Management Software from the gallery to your list of managed SaaS apps.
To set up the integration of Predictix Assortment Planning into Microsoft Entra ID, you need to add Predictix Assortment Planning from the gallery to your list of managed SaaS apps.
To configure the integration of Printix into Microsoft Entra ID, you need to add Printix from the gallery to your list of managed SaaS apps.
To configure the integration of TMWS into Microsoft Entra ID, you need to add TMWS from the gallery to your list of managed SaaS apps.
To configure the integration of TurboRater into Microsoft Entra ID, you need to add TurboRater from the Azure Marketplace to your list of managed SaaS apps:
To configure the integration of Uberflip into Microsoft Entra ID, you need to add Uberflip from the Azure Marketplace to your list of managed SaaS apps:
To configure the integration of Zenya into Microsoft Entra ID, you need to add Zenya from the gallery to your list of managed SaaS apps.
To configure the integration of Zoho into Microsoft Entra ID, you need to add Zoho from the gallery to your list of managed SaaS apps.
To create a collection, you must have a Microsoft Entra ID P1 or P2 license.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
To configure the integration of AirWatch into Microsoft Entra ID, you need to add AirWatch from the gallery to your list of managed SaaS apps.
To configure the integration of Alibaba Cloud Service (Role-based SSO) into Microsoft Entra ID, you need to add Alibaba Cloud Service (Role-based SSO) from the gallery to your list of managed SaaS apps.
To configure the integration of Amazon Business into Microsoft Entra ID, you need to add Amazon Business from the gallery to your list of managed SaaS apps.
To configure the integration of Appian into Microsoft Entra ID, you need to add Appian from the gallery to your list of managed SaaS apps.
To configure the integration of Kion into Microsoft Entra ID, you need to add Kion from the gallery to your list of managed SaaS apps.
To configure the integration of Datadog into Microsoft Entra ID, you need to add Datadog from the gallery to your list of managed SaaS apps.
To configure the integration of DriveLock into Microsoft Entra ID, you need to add DriveLock from the gallery to your list of managed SaaS apps.
To configure the integration of GitHub Enterprise Managed User into Microsoft Entra ID, you need to add GitHub Enterprise Managed User from the gallery to your list of managed SaaS apps.
To configure the integration of GovWin IQ into Microsoft Entra ID, you need to add GovWin IQ from the gallery to your list of managed SaaS apps.
To configure the integration of Learning Pool LMS into Microsoft Entra ID, you need to add Learning Pool LMS from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](./permissions-reference.md#privileged-role-administrator).
To configure the integration of Maxient Conduct Manager Software into Microsoft Entra ID, you need to add Maxient Conduct Manager Software from the gallery to your list of managed SaaS apps.
To configure the integration of Mitel Connect into Microsoft Entra ID, you need to add Mitel Connect from the gallery to your list of managed SaaS apps.
To configure the integration of OpenLearning into Microsoft Entra ID, you need to add OpenLearning from the gallery to your list of managed SaaS apps.
> | microsoft.directory/serviceAction/activateService | Can perform the "activate service" action for a service |
To configure the integration of Recurly into Microsoft Entra ID, you need to add Recurly from the gallery to your list of managed SaaS apps.
To configure the integration of ServiceNow into Microsoft Entra ID, you need to add ServiceNow from the gallery to your list of managed SaaS apps.
To configure the integration of Microsoft Entra SSO for Splunk Enterprise and Splunk Cloud into Microsoft Entra ID, you need to add Microsoft Entra SSO for Splunk Enterprise and Splunk Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of VECOS Releezme Locker management system into Microsoft Entra ID, you need to add VECOS Releezme Locker management system from the gallery to your list of managed SaaS apps.
To configure the integration of Zero Networks into Microsoft Entra ID, you need to add Zero Networks from the gallery to your list of managed SaaS apps.
To configure the integration of Zoom into Microsoft Entra ID, you need to add Zoom from the gallery to your list of managed SaaS apps.
To configure the integration of 10,000ft Plans into Microsoft Entra ID, you need to add 10,000ft Plans from the gallery to your list of managed SaaS apps.
To configure the integration of 123FormBuilder SSO into Microsoft Entra ID, you need to add 123FormBuilder SSO from the gallery to your list of managed SaaS apps.
To configure the integration of 15Five into Microsoft Entra ID, you need to add 15Five from the gallery to your list of managed SaaS apps.
To configure the integration of 23 Video into Microsoft Entra ID, you need to add 23 Video from the gallery to your list of managed SaaS apps.
To configure the integration of 360 Online into Microsoft Entra ID, you need to add 360 Online from the gallery to your list of managed SaaS apps.
To configure the integration of 4DX into Microsoft Entra ID, you need to add 4DX from the gallery to your list of managed SaaS apps.
To configure the integration of 4me into Microsoft Entra ID, you need to add 4me from the gallery to your list of managed SaaS apps.
To configure the integration of 8x8 into Microsoft Entra ID, you need to add 8x8 from the gallery to your list of managed SaaS apps.
To configure the integration of A Cloud Guru into Microsoft Entra ID, you need to add A Cloud Guru from the gallery to your list of managed SaaS apps.
To configure the integration of ABBYY FlexiCapture Cloud into Microsoft Entra ID, you need to add ABBYY FlexiCapture Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Abintegro into Microsoft Entra ID, you need to add Abintegro from the gallery to your list of managed SaaS apps.
To configure the integration of Absorb LMS into Microsoft Entra ID, you need to add Absorb LMS from the gallery to your list of managed SaaS apps.
To configure the integration of Abstract into Microsoft Entra ID, you need to add Abstract from the gallery to your list of managed SaaS apps.
To configure the integration of Academy Attendance into Microsoft Entra ID, you need to add Academy Attendance from the gallery to your list of managed SaaS apps.
To configure the integration of Acadia into Microsoft Entra ID, you need to add Acadia from the gallery to your list of managed SaaS apps.
To configure the integration of Accenture Academy into Microsoft Entra ID, you need to add Accenture Academy from the gallery to your list of managed SaaS apps.
| Claim | Format | Description | Authorization considerations |
**To add Accredible from the gallery, do the following steps:**
To configure the integration of Achieve3000 into Microsoft Entra ID, you need to add Achieve3000 from the gallery to your list of managed SaaS apps.
To configure the integration of ACLP into Microsoft Entra ID, you need to add ACLP from the gallery to your list of managed SaaS apps.
To configure the integration of AcquireIO into Microsoft Entra ID, you need to add AcquireIO from the gallery to your list of managed SaaS apps.
To configure the integration of Active and Thriving into Microsoft Entra ID, you need to add Active and Thriving from the gallery to your list of managed SaaS apps.
To configure the integration of Acunetix 360 into Microsoft Entra ID, you need to add Acunetix 360 from the gallery to your list of managed SaaS apps.
To configure the integration of Adaptive Shield into Microsoft Entra ID, you need to add Adaptive Shield from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com/#home) as at least a [Billing Administrator](https://go.microsoft.com/fwlink/?linkid=2254515).
To configure the integration of ADEM into Microsoft Entra ID, you need to add ADEM from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
To configure the integration of Adobe Creative Cloud into Microsoft Entra ID, you need to add Adobe Creative Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Adobe Sign into Microsoft Entra ID, you need to add Adobe Sign from the gallery to your list of managed SaaS apps.
To configure the integration of Adobe Captivate Prime into Microsoft Entra ID, you need to add Adobe Captivate Prime from the gallery to your list of managed SaaS apps.
To configure the integration of Adobe Experience Manager into Microsoft Entra ID, you need to add Adobe Experience Manager from the gallery to your list of managed SaaS apps.
To configure the integration of Adoddle cSaas Platform into Microsoft Entra ID, you need to add Adoddle cSaas Platform from the gallery to your list of managed SaaS apps.
To configure the integration of ADP EMEA French HR Portal mon.adp.com into Microsoft Entra ID, you need to add ADP EMEA French HR Portal mon.adp.com from the gallery to your list of managed SaaS apps.
To configure the integration of Adra by Trintech into Microsoft Entra ID, you need to add Adra by Trintech from the gallery to your list of managed SaaS apps.
To configure the integration of F5 into Microsoft Entra ID, you need to add F5 from the gallery to your list of managed SaaS apps.
To configure the integration of AfterShip into Microsoft Entra ID, you need to add AfterShip from the gallery to your list of managed SaaS apps.
To configure the integration of Agiloft Contract Management Suite into Microsoft Entra ID, you need to add Agiloft Contract Management Suite from the gallery to your list of managed SaaS apps.
To configure the integration of Aha! into Microsoft Entra ID, you need to add Aha! from the gallery to your list of managed SaaS apps.
To configure the integration of Ahrtemis into Microsoft Entra ID, you need to add Ahrtemis from the gallery to your list of managed SaaS apps.
To configure the integration of Air into Microsoft Entra ID, you need to add Air from the gallery to your list of managed SaaS apps.
To configure the integration of Airtable into Microsoft Entra ID, you need to add Airtable from the gallery to your list of managed SaaS apps.
To configure the integration of Akamai into Microsoft Entra ID, you need to add Akamai from the gallery to your list of managed SaaS apps.
To configure the integration of AKASHI into Microsoft Entra ID, you need to add AKASHI from the gallery to your list of managed SaaS apps.
To configure the integration of AlacrityLaw into Microsoft Entra ID, you need to add AlacrityLaw from the gallery to your list of managed SaaS apps.
To configure the integration of Alcumus Info Exchange into Microsoft Entra ID, you need to add Alcumus Info Exchange from the gallery to your list of managed SaaS apps.
To configure the integration of AlertMedia into Microsoft Entra ID, you need to add AlertMedia from the gallery to your list of managed SaaS apps.
To configure the integration of AlertOps into Microsoft Entra ID, you need to add AlertOps from the gallery to your list of managed SaaS apps.
To configure the integration of AlexisHR into Microsoft Entra ID, you need to add AlexisHR from the gallery to your list of managed SaaS apps.
To configure the integration of Allbound SSO into Microsoft Entra ID, you need to add Allbound SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Allocadia into Microsoft Entra ID, you need to add Allocadia from the gallery to your list of managed SaaS apps.
To configure the integration of Ally.io into Microsoft Entra ID, you need to add Ally.io from the gallery to your list of managed SaaS apps.
To configure the integration of Alohi into Microsoft Entra ID, you need to add Alohi from the gallery to your list of managed SaaS apps.
To configure the integration of Altamira HRM into Microsoft Entra ID, you need to add Altamira HRM from the gallery to your list of managed SaaS apps.
To configure the integration of Alteryx Server into Microsoft Entra ID, you need to add Alteryx Server from the gallery to your list of managed SaaS apps.
To configure the integration of Altoura into Microsoft Entra ID, you need to add Altoura from the gallery to your list of managed SaaS apps.
To configure the integration of Amazing People Schools into Microsoft Entra ID, you need to add Amazing People Schools from the gallery to your list of managed SaaS apps.
To configure the integration of Amazon Managed Grafana into Microsoft Entra ID, you need to add Amazon Managed Grafana from the gallery to your list of managed SaaS apps.
To configure the integration of AWS Single-Account Access into Microsoft Entra ID, you need to add AWS Single-Account Access from the gallery to your list of managed SaaS apps.
To configure the integration of AMMS into Microsoft Entra ID, you need to add AMMS from the gallery to your list of managed SaaS apps.
To configure the integration of Amplified into Microsoft Entra ID, you need to add Amplified from the gallery to your list of managed SaaS apps.
To configure the integration of Amplitude into Microsoft Entra ID, you need to add Amplitude from the gallery to your list of managed SaaS apps.
To configure the integration of Anaplan into Microsoft Entra ID, you need to add Anaplan from the gallery to your list of managed SaaS apps.
To configure the integration of ANAQUA into Microsoft Entra ID, you need to add ANAQUA from the gallery to your list of managed SaaS apps.
To configure the integration of &frankly into Microsoft Entra ID, you need to add &frankly from the gallery to your list of managed SaaS apps.
To configure the integration of Andromeda into Microsoft Entra ID, you need to add Andromeda from the gallery to your list of managed SaaS apps.
To configure the integration of Animaker into Microsoft Entra ID, you need to add Animaker from the gallery to your list of managed SaaS apps.
To configure the integration of AnswerHub into Microsoft Entra ID, you need to add AnswerHub from the gallery to your list of managed SaaS apps.
To configure the integration of Anyone Home CRM into Microsoft Entra ID, you need to add Anyone Home CRM from the gallery to your list of managed SaaS apps.
To configure the integration of Apex Portal into Microsoft Entra ID, you need to add Apex Portal from the gallery to your list of managed SaaS apps.
To configure the integration of Appaegis Isolation Access Cloud into Microsoft Entra ID, you need to add Appaegis Isolation Access Cloud from the gallery to your list of managed SaaS apps.
**To add AppBlade from the gallery, perform the following steps:**
To configure the integration of AppDynamics into Microsoft Entra ID, you need to add AppDynamics from the gallery to your list of managed SaaS apps.
To configure the integration of Appinux into Microsoft Entra ID, you need to add Appinux from the gallery to your list of managed SaaS apps.
To configure the integration of Applied Mental Health into Microsoft Entra ID, you need to add Applied Mental Health from the gallery to your list of managed SaaS apps.
To configure the integration of Applitools Eyes into Microsoft Entra ID, you need to add Applitools Eyes from the gallery to your list of managed SaaS apps.
To configure the integration of Appraisd into Microsoft Entra ID, you need to add Appraisd from the gallery to your list of managed SaaS apps.
To configure the integration of AppRemo into Microsoft Entra ID, you need to add AppRemo from the gallery to your list of managed SaaS apps.
To configure the integration of Conviso Platform SSO into Microsoft Entra ID, you need to add Conviso Platform SSO from the gallery to your list of managed SaaS apps.
To configure the integration of AppSecEngineer into Microsoft Entra ID, you need to add AppSecEngineer from the gallery to your list of managed SaaS apps.
To configure the integration of Apptio into Microsoft Entra ID, you need to add Apptio from the gallery to your list of managed SaaS apps.
**To add Aravo from the gallery, perform the following steps:**
To configure the integration of ArborXR into Microsoft Entra ID, you need to add ArborXR from the gallery to your list of managed SaaS apps.
To configure the integration of ARC Facilities into Microsoft Entra ID, you need to add ARC Facilities from the gallery to your list of managed SaaS apps.
To configure the integration of Arc Publishing - SSO into Microsoft Entra ID, you need to add Arc Publishing - SSO from the gallery to your list of managed SaaS apps.
To configure the integration of ArcGIS Online into Microsoft Entra ID, you need to add ArcGIS Online from the gallery to your list of managed SaaS apps.
To configure the integration of ArcGIS Enterprise into Microsoft Entra ID, you need to add ArcGIS Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Archie into Microsoft Entra ID, you need to add Archie from the gallery to your list of managed SaaS apps.
To configure the integration of Ardoq into Microsoft Entra ID, you need to add Ardoq from the gallery to your list of managed SaaS apps.
To configure the integration of Arena EU into Microsoft Entra ID, you need to add Arena EU from the gallery to your list of managed SaaS apps.
To configure the integration of Arena into Microsoft Entra ID, you need to add Arena from the gallery to your list of managed SaaS apps.
To configure the integration of ARES for Enterprise into Microsoft Entra ID, you need to add ARES for Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Ariba into Microsoft Entra ID, you need to add Ariba from the gallery to your list of managed SaaS apps.
To configure the integration of Articulate 360 into Microsoft Entra ID, you need to add Articulate 360 from the gallery to your list of managed SaaS apps.
To configure the integration of Aruba User Experience Insight into Microsoft Entra ID, you need to add Aruba User Experience Insight from the gallery to your list of managed SaaS apps.
To configure the integration of ASC Contracts into Microsoft Entra ID, you need to add ASC Contracts from the gallery to your list of managed SaaS apps.
To configure the integration of AsignetSSOIntegration into Microsoft Entra ID, you need to add AsignetSSOIntegration from the gallery to your list of managed SaaS apps.
To configure the integration of askSpoke into Microsoft Entra ID, you need to add askSpoke from the gallery to your list of managed SaaS apps.
To configure the integration of AskYourTeam into Microsoft Entra ID, you need to add AskYourTeam from the gallery to your list of managed SaaS apps.
To configure the integration of Assent SSO into Microsoft Entra ID, you need to add Assent SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Asset Infinity into Microsoft Entra ID, you need to add Asset Infinity from the gallery to your list of managed SaaS apps.
To configure the integration of Asset Planner into Microsoft Entra ID, you need to add Asset Planner from the gallery to your list of managed SaaS apps.
To configure the integration of Asset Bank into Microsoft Entra ID, you need to add Asset Bank from the gallery to your list of managed SaaS apps.
To configure the integration of AssetSonar into Microsoft Entra ID, you need to add AssetSonar from the gallery to your list of managed SaaS apps.
To configure the integration of Astra Schedule into Microsoft Entra ID, you need to add Astra Schedule from the gallery to your list of managed SaaS apps.
To configure the integration of Astro into Microsoft Entra ID, you need to add Astro from the gallery to your list of managed SaaS apps.
To configure the integration of Atlassian Cloud into Microsoft Entra ID, you need to add Atlassian Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Atomic Learning into Microsoft Entra ID, you need to add Atomic Learning from the gallery to your list of managed SaaS apps.
To configure the integration of ATP SpotLight and ChronicX into Microsoft Entra ID, you need to add ATP SpotLight and ChronicX from the gallery to your list of managed SaaS apps.
To configure the integration of Attendance Management Services into Microsoft Entra ID, you need to add Attendance Management Services from the gallery to your list of managed SaaS apps.
To configure the integration of Authomize into Microsoft Entra ID, you need to add Authomize from the gallery to your list of managed SaaS apps.
To configure the integration of Autodesk SSO into Microsoft Entra ID, you need to add Autodesk SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Autotask Endpoint Backup into Microsoft Entra ID, you need to add Autotask Endpoint Backup from the gallery to your list of managed SaaS apps.
To configure the integration of AwardSpring into Microsoft Entra ID, you need to add AwardSpring from the gallery to your list of managed SaaS apps.
To configure the integration of AwareGo into Microsoft Entra ID, you need to add AwareGo from the gallery to your list of managed software as a service (SaaS) apps.
To configure the integration of AWS ClientVPN into Microsoft Entra ID, you need to add AWS ClientVPN from the gallery to your list of managed SaaS apps.
To configure the integration of AWS IAM Identity Center into Microsoft Entra ID, you need to add AWS IAM Identity Center from the gallery to your list of managed SaaS apps.
To configure the integration of Axiad Conductor for Entra ID into Microsoft Entra ID, you need to add Axiad Conductor for Entra ID from the gallery to your list of managed SaaS apps.
To configure the integration of Axway CSOS into Microsoft Entra ID, you need to add Axway CSOS from the gallery to your list of managed SaaS apps.
To configure the integration of Baldwin Safety and Compliance into Microsoft Entra ID, you need to add Baldwin Safety and Compliance from the gallery to your list of managed SaaS apps.
To configure the integration of Balsamiq Wireframes into Microsoft Entra ID, you need to add Balsamiq Wireframes from the gallery to your list of managed SaaS apps.
To configure the integration of BambooHR into Microsoft Entra ID, you need to add BambooHR from the gallery to your list of managed SaaS apps.
To configure the integration of Employee Advocacy by Sprout Social into Microsoft Entra ID, you need to add Employee Advocacy by Sprout Social from the gallery to your list of managed SaaS apps.
To configure the integration of BMIS - Battery Management Information System into Microsoft Entra ID, you need to add BMIS - Battery Management Information System from the gallery to your list of managed SaaS apps.
To configure the integration of BC in the Cloud into Microsoft Entra ID, you need to add BC in the Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Bealink into Microsoft Entra ID, you need to add Bealink from the gallery to your list of managed SaaS apps.
To configure the integration of Beatrust into Microsoft Entra ID, you need to add Beatrust from the gallery to your list of managed SaaS apps.
To configure the integration of Beautiful.ai into Microsoft Entra ID, you need to add Beautiful.ai from the gallery to your list of managed SaaS apps.
To configure the integration of Beekeeper Microsoft Entra SSO into Microsoft Entra ID, you need to add Beekeeper Microsoft Entra SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Benchling into Microsoft Entra ID, you need to add Benchling from the gallery to your list of managed SaaS apps.
To configure the integration of BenefitHub into Microsoft Entra ID, you need to add BenefitHub from the gallery to your list of managed SaaS apps.
To configure the integration of Benefitsolver into Microsoft Entra ID, you need to add Benefitsolver from the gallery to your list of managed SaaS apps.
To configure the integration of BenQ IAM into Microsoft Entra ID, you need to add BenQ IAM from the gallery to your list of managed SaaS apps.
To configure the integration of BenSelect into Microsoft Entra ID, you need to add BenSelect from the gallery to your list of managed SaaS apps.
To configure the integration of Betterworks into Microsoft Entra ID, you need to add Betterworks from the gallery to your list of managed SaaS apps.
To configure the integration of Beyond Identity Admin Console into Microsoft Entra ID, you need to add Beyond Identity Admin Console from the gallery to your list of managed SaaS apps.
**To add BGS Online from the gallery, perform the following steps:**
To configure the integration of BIC Process Design into Microsoft Entra ID, you need to add BIC Process Design from the gallery to your list of managed SaaS apps.
To configure the integration of Bime into Microsoft Entra ID, you need to add Bime from the gallery to your list of managed SaaS apps.
To configure the integration of Birst Agile Business Analytics into Microsoft Entra ID, you need to add Birst Agile Business Analytics from the gallery to your list of managed SaaS apps.
To configure the integration of BIS into Microsoft Entra ID, you need to add BIS from the gallery to your list of managed SaaS apps.
To configure the integration of BitaBIZ into Microsoft Entra ID, you need to add BitaBIZ from the gallery to your list of managed SaaS apps.
To configure the integration of Bitly into Microsoft Entra ID, you need to add Bitly from the gallery to your list of managed SaaS apps.
To configure the integration of Blackboard Learn - Shibboleth into Microsoft Entra ID, you need to add Blackboard Learn - Shibboleth from the gallery to your list of managed SaaS apps.
To configure the integration of Blackboard Learn into Microsoft Entra ID, you need to add Blackboard Learn from the gallery to your list of managed SaaS apps.
To configure the integration of Blink into Microsoft Entra ID, you need to add Blink from the gallery to your list of managed SaaS apps.
To configure the integration of Blinq into Microsoft Entra ID, you need to add Blinq from the gallery to your list of managed SaaS apps.
To configure the integration of Blockbax into Microsoft Entra ID, you need to add Blockbax from the gallery to your list of managed SaaS apps.
To configure the integration of Blue Access for Members (BAM) into Microsoft Entra ID, you need to add Blue Access for Members (BAM) from the gallery to your list of managed SaaS apps.
To configure the integration of Blue Ocean Brain into Microsoft Entra ID, you need to add Blue Ocean Brain from the gallery to your list of managed SaaS apps.
To configure the integration of BeyondTrust Remote Support into Microsoft Entra ID, you need to add BeyondTrust Remote Support from the gallery to your list of managed SaaS apps.
To configure the integration of Bonos into Microsoft Entra ID, you need to add Bonos from the gallery to your list of managed SaaS apps.
To configure the integration of Bonusly into Microsoft Entra ID, you need to add Bonusly from the gallery to your list of managed SaaS apps.
To configure the integration of Boomi into Microsoft Entra ID, you need to add Boomi from the gallery to your list of managed SaaS apps.
To configure the integration of BorrowBox into Microsoft Entra ID, you need to add BorrowBox from the gallery to your list of managed SaaS apps.
To configure the integration of Box into Microsoft Entra ID, you need to add Box from the gallery to your list of managed SaaS apps.
To configure the integration of Boxcryptor into Microsoft Entra ID, you need to add Boxcryptor from the gallery to your list of managed SaaS apps.
To configure the integration of Creatio into Microsoft Entra ID, you need to add Creatio from the gallery to your list of managed SaaS apps.
**To add Brandfolder from the gallery, perform the following steps:**
To configure the integration of Braze into Microsoft Entra ID, you need to add Braze from the gallery to your list of managed SaaS apps.
To configure the integration of Bridge into Microsoft Entra ID, you need to add Bridge from the gallery to your list of managed SaaS apps.
To configure the integration of Bright Pattern Omnichannel Contact Center into Microsoft Entra ID, you need to add Bright Pattern Omnichannel Contact Center from the gallery to your list of managed SaaS apps.
To configure the integration of Brightidea into Microsoft Entra ID, you need to add Brightidea from the gallery to your list of managed SaaS apps.
To configure the integration of Brightspace by Desire2Learn into Microsoft Entra ID, you need to add Brightspace by Desire2Learn from the gallery to your list of managed SaaS apps.
To configure the integration of Briq into Microsoft Entra ID, you need to add Briq from the gallery to your list of managed SaaS apps.
To configure the integration of Britive into Microsoft Entra ID, you need to add Britive from the gallery to your list of managed SaaS apps.
To configure the integration of Broadcom DX SaaS into Microsoft Entra ID, you need to add Broadcom DX SaaS from the gallery to your list of managed SaaS apps.
To configure the integration of Broker groupe Achat Solutions into Microsoft Entra ID, you need to add Broker groupe Achat Solutions from the gallery to your list of managed SaaS apps.
To configure the integration of BrowserStack Single Sign-on into Microsoft Entra ID, you need to add BrowserStack Single Sign-on from the gallery to your list of managed SaaS apps.
To configure the integration of Brushup into Microsoft Entra ID, you need to add Brushup from the gallery to your list of managed SaaS apps.
To configure the integration of bswift into Microsoft Entra ID, you need to add bswift from the gallery to your list of managed SaaS apps.
To configure the integration of Bugcrowd into Microsoft Entra ID, you need to add Bugcrowd from the gallery to your list of managed SaaS apps.
To configure the integration of Bugsnag into Microsoft Entra ID, you need to add Bugsnag from the gallery to your list of managed SaaS apps.
To configure the integration of BullseyeTDP into Microsoft Entra ID, you need to add BullseyeTDP from the gallery to your list of managed SaaS apps.
To configure the integration of Burp Suite Enterprise Edition into Microsoft Entra ID, you need to add Burp Suite Enterprise Edition from the gallery to your list of managed SaaS apps.
To configure the integration of Businessmap into Microsoft Entra ID, you need to add Businessmap from the gallery to your list of managed SaaS apps.
To configure the integration of Buttonwood Central SSO into Microsoft Entra ID, you need to add Buttonwood Central SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Bynder into Microsoft Entra ID, you need to add Bynder from the gallery to your list of managed SaaS apps.
To configure the integration of C3M Cloud Control into Microsoft Entra ID, you need to add C3M Cloud Control from the gallery to your list of managed SaaS apps.
To configure the integration of CakeHR into Microsoft Entra ID, you need to add CakeHR from the gallery to your list of managed SaaS apps.
To configure the integration of Campus Café into Microsoft Entra ID, you need to add Campus Café from the gallery to your list of managed SaaS apps.
To configure the integration of Canvas into Microsoft Entra ID, you need to add Canvas from the gallery to your list of managed SaaS apps.
To configure the integration of Clarity into Microsoft Entra ID, you need to add Clarity from the gallery to your list of managed SaaS apps.
To configure the integration of Capriza Platform into Microsoft Entra ID, you need to add Capriza Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Carbonite Endpoint Backup into Microsoft Entra ID, you need to add Carbonite Endpoint Backup from the gallery to your list of managed SaaS apps.
To configure the integration of Catchpoint into Microsoft Entra ID, add Catchpoint to your list of managed SaaS apps.
To configure the integration of CBRE ServiceInsight into Microsoft Entra ID, you need to add CBRE ServiceInsight from the gallery to your list of managed SaaS apps.
To configure the integration of CCH Tagetik into Microsoft Entra ID, you need to add CCH Tagetik from the gallery to your list of managed SaaS apps.
To configure the integration of Central Desktop into Microsoft Entra ID, you need to add Central Desktop from the gallery to your list of managed SaaS apps.
To configure the integration of Cerby into Microsoft Entra ID, you need to add Cerby from the gallery to your list of managed SaaS apps.
To configure the integration of Cerner Central into Microsoft Entra ID, you need to add Cerner Central from the gallery to your list of managed SaaS apps.
To configure the integration of Certain Admin SSO into Microsoft Entra ID, you need to add Certain Admin SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Certent Equity Management into Microsoft Entra ID, you need to add Certent Equity Management from the gallery to your list of managed SaaS apps.
To configure the integration of Certify into Microsoft Entra ID, you need to add Certify from the gallery to your list of managed SaaS apps.
To configure the integration of Cezanne HR Software into Microsoft Entra ID, you need to add Cezanne HR Software from the gallery to your list of managed SaaS apps.
To configure the integration of Chargebee into Microsoft Entra ID, you need to add Chargebee from the gallery to your list of managed SaaS apps.
To configure the integration of Chatwork into Microsoft Entra ID, you need to add Chatwork from the gallery to your list of managed SaaS apps.
To configure the integration of Check Point Harmony Connect into Microsoft Entra ID, you need to add Check Point Harmony Connect from the gallery to your list of managed SaaS apps.
To configure the integration of Check Point Identity Awareness into Microsoft Entra ID, you need to add Check Point Identity Awareness from the gallery to your list of managed SaaS apps.
To configure the integration of Check Point Remote Secure Access VPN into Microsoft Entra ID, you need to add Check Point Remote Secure Access VPN from the gallery to your list of managed SaaS apps.
To configure the integration of Check Point Infinity Portal into Microsoft Entra ID, you need to add Check Point Infinity Portal from the gallery to your list of managed SaaS apps.
To configure the integration of CheckProof into Microsoft Entra ID, you need to add CheckProof from the gallery to your list of managed SaaS apps.
To configure the integration of Cheetah For Benelux into Microsoft Entra ID, you need to add Cheetah For Benelux from the gallery to your list of managed SaaS apps.
To configure the integration of Cherwell into Microsoft Entra ID, you need to add Cherwell from the gallery to your list of managed SaaS apps.
To configure the integration of Chromeriver into Microsoft Entra ID, you need to add Chromeriver from the gallery to your list of managed SaaS apps.
To configure the integration of ChronicX® into Microsoft Entra ID, you need to add ChronicX® from the gallery to your list of managed SaaS apps.
To configure the integration of CIC - Controle Inteligente de Compensação into Microsoft Entra ID, you need to add CIC - Controle Inteligente de Compensação from the gallery to your list of managed SaaS apps.
To configure the integration of Cimpl into Microsoft Entra ID, you need to add Cimpl from the gallery to your list of managed SaaS apps.
To configure the integration of Cisco Intersight into Microsoft Entra ID, you need to add Cisco Intersight from the gallery to your list of managed SaaS apps.
To configure the integration of Cisco Secure Firewall - Secure Client into Microsoft Entra ID, you need to add Cisco Secure Firewall - Secure Client from the gallery to your list of managed SaaS apps.
To configure the integration of Cisco Webex into Microsoft Entra ID, you need to add Cisco Webex from the gallery to your list of managed SaaS apps.
To configure the integration of Cisco Umbrella Admin SSO into Microsoft Entra ID, you need to add Cisco Umbrella Admin SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Cisco Webex Meetings into Microsoft Entra ID, you need to add Cisco Webex Meetings from the gallery to your list of managed SaaS apps.
To configure the integration of Cisco Cloud into Microsoft Entra ID, you need to add Cisco Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of GoToMeeting into Microsoft Entra ID, you need to add GoToMeeting from the gallery to your list of managed SaaS apps.
To configure the integration of ClarivateWOS into Microsoft Entra ID, you need to add ClarivateWOS from the gallery to your list of managed SaaS apps.
To configure the integration of Clarizen One into Microsoft Entra ID, you need to add Clarizen One from the gallery to your list of managed SaaS apps.
To configure the integration of Claromentis into Microsoft Entra ID, you need to add Claromentis from the gallery to your list of managed SaaS apps.
To configure the integration of ClearCompany into Microsoft Entra ID, you need to add ClearCompany from the gallery to your list of managed SaaS apps.
To configure the integration of Clear Review into Microsoft Entra ID, you need to add Clear Review from the gallery to your list of managed SaaS apps.
To configure the integration of Clebex into Microsoft Entra ID, you need to add Clebex from the gallery to your list of managed SaaS apps.
To configure the integration of Clever Nelly into Microsoft Entra ID, you need to add Clever Nelly from the gallery to your list of managed SaaS apps.
To configure the integration of Clever into Microsoft Entra ID, you need to add Clever from the gallery to your list of managed SaaS apps.
To configure the integration of ClickTime into Microsoft Entra ID, you need to add ClickTime from the gallery to your list of managed SaaS apps.
To configure the integration of ClickUp Productivity Platform into Microsoft Entra ID, you need to add ClickUp Productivity Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Clockwork Recruiting into Microsoft Entra ID, you need to add Clockwork Recruiting from the gallery to your list of managed SaaS apps.
To configure the integration of Cloud iManage into Microsoft Entra ID, you need to add Cloud iManage from the gallery to your list of managed SaaS apps.
To configure the integration of Cloud Service PICCO into Microsoft Entra ID, you need to add Cloud Service PICCO from the gallery to your list of managed SaaS apps.
To configure the integration of CloudCords into Microsoft Entra ID, you need to add CloudCords from the gallery to your list of managed SaaS apps.
To configure the integration of CloudKnox Permissions Management Platform into Microsoft Entra ID, you need to add CloudKnox Permissions Management Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Cloudmore into Microsoft Entra ID, you need to add Cloudmore from the gallery to your list of managed SaaS apps.
To configure the integration of CloudPassage into Microsoft Entra ID, you need to add CloudPassage from the gallery to your list of managed SaaS apps.
To configure the integration of CloudSign into Microsoft Entra ID, you need to add CloudSign from the gallery to your list of managed SaaS apps.
To configure the integration of Cobalt into Microsoft Entra ID, you need to add Cobalt from the gallery to your list of managed SaaS apps.
To configure the integration of Coda into Microsoft Entra ID, you need to add Coda from the gallery to your list of managed SaaS apps.
To configure the integration of Codility into Microsoft Entra ID, you need to add Codility from the gallery to your list of managed SaaS apps.
To configure the integration of Coggle into Microsoft Entra ID, you need to add Coggle from the gallery to your list of managed SaaS apps.
To configure the integration of Cognician into Microsoft Entra ID, you need to add Cognician from the gallery to your list of managed SaaS apps.
To configure the integration of Cognidox into Microsoft Entra ID, you need to add Cognidox from the gallery to your list of managed SaaS apps.
To configure the integration of Cognism into Microsoft Entra ID, you need to add Cognism from the gallery to your list of managed SaaS apps.
To configure the integration of CoLab into Microsoft Entra ID, you need to add CoLab from the gallery to your list of managed SaaS apps.
To configure the integration of Collaborative Innovation into Microsoft Entra ID, you need to add Collaborative Innovation from the gallery to your list of managed SaaS apps.
To configure the integration of Collector Systems into Microsoft Entra ID, you need to add Collector Systems from the gallery to your list of managed SaaS apps.
To configure the integration of Collibra into Microsoft Entra ID, you need to add Collibra from the gallery to your list of managed SaaS apps.
To configure the integration of ColorTokens ZTNA into Microsoft Entra ID, you need to add ColorTokens ZTNA from the gallery to your list of managed SaaS apps.
To configure the integration of Comeet Recruiting Software into Microsoft Entra ID, you need to add Comeet Recruiting Software from the gallery to your list of managed SaaS apps.
To configure the integration of Comm100 Live Chat into Microsoft Entra ID, you need to add Comm100 Live Chat from the gallery to your list of managed SaaS apps.
To configure the integration of Communifire into Microsoft Entra ID, you need to add Communifire from the gallery to your list of managed SaaS apps.
To configure the integration of Community Spark into Microsoft Entra ID, you need to add Community Spark from the gallery to your list of managed SaaS apps.
To configure the integration of CompetencyIQ into Microsoft Entra ID, you need to add CompetencyIQ from the gallery to your list of managed SaaS apps.
**To add Compliance ELF from the gallery, perform the following steps:**
To configure the integration of SAP Concur Travel and Expense into Microsoft Entra ID, you need to add SAP Concur Travel and Expense from the gallery to your list of managed SaaS apps.
To configure the integration of Concur into Microsoft Entra ID, you need to add Concur from the gallery to your list of managed SaaS apps.
To create and verify a custom domain:
To configure the integration of Confirmit Horizons into Microsoft Entra ID, you need to add Confirmit Horizons from the gallery to your list of managed SaaS apps.
To configure the integration of Consent2Go into Microsoft Entra ID, you need to add Consent2Go from the gallery to your list of managed SaaS apps.
To configure the integration of Contentful into Microsoft Entra ID, you need to add Contentful from the gallery to your list of managed SaaS apps.
To configure the integration of Contentkalender into Microsoft Entra ID, you need to add Contentkalender from the gallery to your list of managed SaaS apps.
To configure the integration of Contentsquare SSO into Microsoft Entra ID, you need to add Contentsquare SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Contentstack into Microsoft Entra ID, you need to add Contentstack from the gallery to your list of managed SaaS apps.
To configure the integration of ContractWorks into Microsoft Entra ID, you need to add ContractWorks from the gallery to your list of managed SaaS apps.
To configure the integration of Control into Microsoft Entra ID, you need to add Control from the gallery to your list of managed SaaS apps.
To configure the integration of Convene into Microsoft Entra ID, you need to add Convene from the gallery to your list of managed SaaS apps.
To configure the integration of Convercent into Microsoft Entra ID, you need to add Convercent from the gallery to your list of managed SaaS apps.
To configure the integration of Convi.BASE into Microsoft Entra ID, you need to add Convi.BASE from the gallery to your list of managed SaaS apps.
To configure the Microsoft Entra SSO integration with Cornerstone, you need to...
To configure the integration of CorporateExperience into Microsoft Entra ID, you need to add CorporateExperience from the gallery to your list of managed SaaS apps.
**To add Corptax from the gallery, perform the following steps:**
To configure the integration of Couchbase Server - SSO into Microsoft Entra ID, you need to add Couchbase Server - SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Count Me In - Operations Dashboard into Microsoft Entra ID, you need to add Count Me In - Operations Dashboard from the gallery to your list of managed SaaS apps.
To configure the integration of Coupa into Microsoft Entra ID, you need to add Coupa from the gallery to your list of managed SaaS apps.
To configure the integration of Cincom CPQ into Microsoft Entra ID, you need to add Cincom CPQ from the gallery to your list of managed SaaS apps.
To configure the integration of CrashPlan into Microsoft Entra ID, you need to add CrashPlan from the gallery to your list of managed SaaS apps.
To configure the integration of Crayon into Microsoft Entra ID, you need to add Crayon from the gallery to your list of managed SaaS apps.
To configure the integration of Create!Webフロー into Microsoft Entra ID, you need to add Create!Webフロー from the gallery to your list of managed SaaS apps.
To configure the integration of Crises Control into Microsoft Entra ID, you need to add Crises Control from the gallery to your list of managed SaaS apps.
To configure the integration of CrossKnowledge Learning Suite into Microsoft Entra ID, you need to add CrossKnowledge Learning Suite from the gallery to your list of managed SaaS apps.
To configure the integration of CrowdStrike Falcon Platform into Microsoft Entra ID, you need to add CrowdStrike Falcon Platform from the gallery to your list of managed SaaS apps.
**To add CS Stars from the gallery, perform the following steps:**
To configure the integration of Culture Shift into Microsoft Entra ID, you need to add Culture Shift from the gallery to your list of managed SaaS apps.
To configure the integration of CultureHQ into Microsoft Entra ID, you need to add CultureHQ from the gallery to your list of managed SaaS apps.
To configure the integration of Curator into Microsoft Entra ID, you need to add Curator from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
To configure the integration of CWT into Microsoft Entra ID, you need to add CWT from the gallery to your list of managed SaaS apps.
To configure the integration of Cyara CX Assurance Platform into Microsoft Entra ID, you need to add Cyara CX Assurance Platform from the gallery to your list of managed SaaS apps.
To configure the integration of CyberSolutions CYBERMAILΣ into Microsoft Entra ID, you need to add CyberSolutions CYBERMAILΣ from the gallery to your list of managed SaaS apps.
To configure the integration of CyberSolutions MAILBASEΣ\CMSS into Microsoft Entra ID, you need to add CyberSolutions MAILBASEΣ\CMSS from the gallery to your list of managed SaaS apps.
To configure the integration of Cytric into Microsoft Entra ID, you need to add Cytric from the gallery to your list of managed SaaS apps.
To configure the integration of Dagster Cloud into Microsoft Entra ID, you need to add Dagster Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Darwinbox into Microsoft Entra ID, you need to add Darwinbox from the gallery to your list of managed SaaS apps.
To configure the integration of DATABASICS into Microsoft Entra ID, you need to add DATABASICS from the gallery to your list of managed SaaS apps.
To configure the integration of DataCamp into Microsoft Entra ID, you need to add DataCamp from the gallery to your list of managed SaaS apps.
To configure the integration of Datahug into Microsoft Entra ID, you need to add Datahug from the gallery to your list of managed SaaS apps.
To configure the integration of Datasite into Microsoft Entra ID, you need to add Datasite from the gallery to your list of managed SaaS apps.
To configure the integration of Datava Enterprise Service Platform into Microsoft Entra ID, you need to add Datava Enterprise Service Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Datto Workplace Single Sign On into Microsoft Entra ID, you need to add Datto Workplace Single Sign On from the gallery to your list of managed SaaS apps.
To configure the integration of Dealpath into Microsoft Entra ID, you need to add Dealpath from the gallery to your list of managed SaaS apps.
To configure the integration of deBroome Brand Portal into Microsoft Entra ID, you need to add deBroome Brand Portal from the gallery to your list of managed SaaS apps.
To configure the integration of Degreed into Microsoft Entra ID, you need to add Degreed from the gallery to your list of managed SaaS apps.
To configure the integration of Delivery Scheduling Tool into Microsoft Entra ID, you need to add Delivery Scheduling Tool from the gallery to your list of managed SaaS apps.
To configure the integration of Deputy into Microsoft Entra ID, you need to add Deputy from the gallery to your list of managed SaaS apps.
To configure the integration of desknet's NEO into Microsoft Entra ID, you need to add desknet's NEO from the gallery to your list of managed SaaS apps.
To configure the integration of Deskradar into Microsoft Entra ID, you need to add Deskradar from the gallery to your list of managed SaaS apps.
To configure the integration of Diffchecker into Microsoft Entra ID, you need to add Diffchecker from the gallery to your list of managed SaaS apps.
To configure the integration of DigiCert into Microsoft Entra ID, you need to add DigiCert from the gallery to your list of managed SaaS apps.
To configure the integration of Dining Sidekick into Microsoft Entra ID, you need to add Dining Sidekick from the gallery to your list of managed SaaS apps.
To configure the integration of direct into Microsoft Entra ID, you need to add direct from the gallery to your list of managed SaaS apps.
To configure the integration of Directory Services into Microsoft Entra ID, you need to add Directory Services from the gallery to your list of managed SaaS apps.
To configure the integration of directprint.io Cloud Print Administration into Microsoft Entra ID, you need to add directprint.io Cloud Print Administration from the gallery to your list of managed SaaS apps.
To configure the integration of Discovery Benefits SSO into Microsoft Entra ID, you need to add Discovery Benefits SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Displayr into Microsoft Entra ID, you need to add Displayr from the gallery to your list of managed SaaS apps.
To configure the integration of DLG Learning Center into Microsoft Entra ID, you need to add DLG Learning Center from the gallery to your list of managed SaaS apps.
To configure the integration of dmarcian into Microsoft Entra ID, you need to add dmarcian from the gallery to your list of managed SaaS apps.
To configure the integration of Docker Business into Microsoft Entra ID, you need to add Docker Business from the gallery to your list of managed SaaS apps.
To configure the integration of Documo into Microsoft Entra ID, you need to add Documo from the gallery to your list of managed SaaS apps.
To configure the integration of DocuSign into Microsoft Entra ID, you must add DocuSign from the gallery to your list of managed SaaS apps:
To configure the integration of DojoWM into Microsoft Entra ID, you need to add DojoWM from the gallery to your list of managed SaaS apps.
To configure the integration of Check Point CloudGuard Posture Management into Microsoft Entra ID, you need to add Check Point CloudGuard Posture Management from the gallery to your list of managed SaaS apps.
To configure the integration of dominKnow|ONE into Microsoft Entra ID, you need to add dominKnow|ONE from the gallery to your list of managed SaaS apps.
To configure the integration of Domo into Microsoft Entra ID, you need to add Domo from the gallery to your list of managed SaaS apps.
To configure the integration of Dossier into Microsoft Entra ID, you need to add Dossier from the gallery to your list of managed SaaS apps.
To configure the integration of Dovetale into Microsoft Entra ID, you need to add Dovetale from the gallery to your list of managed SaaS apps.
**To add Dow Jones Factiva from the gallery, perform the following steps:**
To configure the integration of Draup, Inc into Microsoft Entra ID, you need to add Draup, Inc from the gallery to your list of managed SaaS apps.
To configure the integration of Drift into Microsoft Entra ID, you need to add Drift from the gallery to your list of managed SaaS apps.
To configure the integration of Dropbox Business into Microsoft Entra ID, you need to add Dropbox Business from the gallery to your list of managed SaaS apps.
To configure the integration of DRTrack into Microsoft Entra ID, you need to add DRTrack from the gallery to your list of managed SaaS apps.
To configure the integration of Druva into Microsoft Entra ID, you need to add Druva from the gallery to your list of managed SaaS apps.
To configure the integration of Druva into Microsoft Entra ID, you need to add Druva from the gallery to your list of managed SaaS apps.
To configure the integration of Dynatrace into Microsoft Entra ID, you need to add Dynatrace from the gallery to your list of managed SaaS apps.
To configure the integration of E-days into Microsoft Entra ID, you need to add E-days from the gallery to your list of managed SaaS apps.
To configure the integration of e2open CM-Global into Microsoft Entra ID, you need to add e2open CM-Global from the gallery to your list of managed SaaS apps.
To configure the integration of E2open LSP into Microsoft Entra ID, you need to add E2open LSP from the gallery to your list of managed SaaS apps.
To configure the integration of EAB Implementation into Microsoft Entra ID, you need to add EAB Implementation from the gallery to your list of managed SaaS apps.
To configure the integration of EAB Navigate Strategic Care into Microsoft Entra ID, you need to add EAB Navigate Strategic Care from the gallery to your list of managed SaaS apps.
To configure the integration of EAB into Microsoft Entra ID, you need to add EAB from the gallery to your list of managed SaaS apps.
To configure the integration of EAComposer into Microsoft Entra ID, you need to add EAComposer from the gallery to your list of managed SaaS apps.
To configure the integration of EasySSO for Bamboo into Microsoft Entra ID, you need to add EasySSO for Bamboo from the gallery to your list of managed SaaS apps.
To configure the integration of EasySSO for BitBucket into Microsoft Entra ID, you need to add EasySSO for BitBucket from the gallery to your list of managed SaaS apps.
To configure the integration of EasySSO for Confluence into Microsoft Entra ID, you need to add EasySSO for Confluence from the gallery to your list of managed SaaS apps.
To configure the integration of EasySSO for Jira into Microsoft Entra ID, you need to add EasySSO for Jira from the gallery to your list of managed SaaS apps.
**To add EasyTerritory from the gallery, perform the following steps:**
To configure the integration of EBSCO into Microsoft Entra ID, you need to add EBSCO from the gallery to your list of managed SaaS apps.
To configure the integration of Eccentex AppBase for Azure into Microsoft Entra ID, you need to add Eccentex AppBase for Azure from the gallery to your list of managed SaaS apps.
To configure the integration of EchoSpan into Microsoft Entra ID, you need to add EchoSpan from the gallery to your list of managed SaaS apps.
To configure the integration of eCornell into Microsoft Entra ID, you need to add eCornell from the gallery to your list of managed SaaS apps.
To configure the integration of Edcor into Microsoft Entra ID, you need to add Edcor from the gallery to your list of managed SaaS apps.
**To add eDigitalResearch from the gallery, perform the following steps:**
To configure the integration of Ediwin SaaS EDI into Microsoft Entra ID, you need to add Ediwin SaaS EDI from the gallery to your list of managed SaaS apps.
To configure the integration of EduBrite LMS into Microsoft Entra ID, you need to add EduBrite LMS from the gallery to your list of managed SaaS apps.
To configure the integration of EFI Digital StoreFront into Microsoft Entra ID, you need to add EFI Digital StoreFront from the gallery to your list of managed SaaS apps.
To configure the integration of eFlok into Microsoft Entra ID, you need to add eFlok from the gallery to your list of managed SaaS apps.
To configure the integration of Egnyte into Microsoft Entra ID, you need to add Egnyte from the gallery to your list of managed SaaS apps.
To configure the integration of Egress into Microsoft Entra ID, you need to add Egress from the gallery to your list of managed SaaS apps.
To configure the integration of ekarda into Microsoft Entra ID, add ekarda from the gallery to your list of managed SaaS apps:
To configure the integration of eKincare into Microsoft Entra ID, you need to add eKincare from the gallery to your list of managed SaaS apps.
To configure the integration of eLearnPOSH into Microsoft Entra ID, you need to add eLearnPOSH from the gallery to your list of managed SaaS apps.
To configure the integration of Eli Onboarding into Microsoft Entra ID, you need to add Eli Onboarding from the gallery to your list of managed SaaS apps.
To configure the integration of Elium into Microsoft Entra ID, you need to add Elium from the gallery to your list of managed SaaS apps.
To configure the integration of Elqano SSO into Microsoft Entra ID, you need to add Elqano SSO from the gallery to your list of managed SaaS apps.
To configure the integration of eLuminate into Microsoft Entra ID, you need to add eLuminate from the gallery to your list of managed SaaS apps.
To configure the integration of Embark into Microsoft Entra ID, you need to add Embark from the gallery to your list of managed SaaS apps.
To configure the integration of embed signage into Microsoft Entra ID, you need to add embed signage from the gallery to your list of managed SaaS apps.
To configure the integration of Empactis into Microsoft Entra ID, you need to add Empactis from the gallery to your list of managed SaaS apps.
To configure the integration of Emplifi platform into Microsoft Entra ID, you need to add Emplifi platform from the gallery to your list of managed SaaS apps.
To configure the integration of Enablon into Microsoft Entra ID, you need to add Enablon from the gallery to your list of managed SaaS apps.
To configure the integration of Encompass into Microsoft Entra ID, you need to add Encompass from the gallery to your list of managed SaaS apps.
To configure the integration of Enterprise Advantage into Microsoft Entra ID, you need to add Enterprise Advantage from the gallery to your list of managed SaaS apps.
To configure the integration of Active Directory SSO for DoubleYou into Microsoft Entra ID, you need to add Active Directory SSO for DoubleYou from the gallery to your list of managed SaaS apps.
To configure the integration of Envi MMIS into Microsoft Entra ID, you need to add Envi MMIS from the gallery to your list of managed SaaS apps.
To configure the integration of Envoy into Microsoft Entra ID, you need to add Envoy from the gallery to your list of managed SaaS apps.
To configure the integration of EPHOTO DAM into Microsoft Entra ID, you need to add EPHOTO DAM from the gallery to your list of managed SaaS apps.
To configure the integration of ePlatform into Microsoft Entra ID, you need to add ePlatform from the gallery to your list of managed SaaS apps.
To configure the integration of Equifax Workforce Solutions into Microsoft Entra ID, you need to add Equifax Workforce Solutions from the gallery to your list of managed SaaS apps.
To configure the integration of Equinix Federation App into Microsoft Entra ID, you need to add Equinix Federation App from the gallery to your list of managed SaaS apps.
To configure the integration of Equisolve into Microsoft Entra ID, you need to add Equisolve from the gallery to your list of managed SaaS apps.
To configure the integration of ERA_EHS_CORE into Microsoft Entra ID, you need to add ERA_EHS_CORE from the gallery to your list of managed SaaS apps.
To configure the integration of EthicsPoint Incident Management (EPIM) into Microsoft Entra ID, you need to add EthicsPoint Incident Management (EPIM) from the gallery to your list of managed SaaS apps.
To configure the integration of Aventri into Microsoft Entra ID, you need to add Aventri from the gallery to your list of managed SaaS apps.
To configure the integration of Eventfinity into Microsoft Entra ID, you need to add Eventfinity from the gallery to your list of managed SaaS apps.
To configure the integration of EverBridge into Microsoft Entra ID, you need to add EverBridge from the gallery to your list of managed SaaS apps.
To configure the integration of Evergreen into Microsoft Entra ID, you need to add Evergreen from the gallery to your list of managed SaaS apps.
To configure the integration of Evernote into Microsoft Entra ID, you need to add Evernote from the gallery to your list of managed SaaS apps.
To configure the integration of Evidence.com into Microsoft Entra ID, you need to add Evidence.com from the gallery to your list of managed SaaS apps.
To configure the integration of Evovia into Microsoft Entra ID, you need to add Evovia from the gallery to your list of managed SaaS apps.
To configure the integration of ExactCare SSO into Microsoft Entra ID, you need to add ExactCare SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Exceed.ai into Microsoft Entra ID, you need to add Exceed.ai from the gallery to your list of managed SaaS apps.
To configure the integration of Excelity HCM into Microsoft Entra ID, you need to add Excelity HCM from the gallery to your list of managed SaaS apps.
To configure the integration of ExcelityGlobal into Microsoft Entra ID, you need to add ExcelityGlobal from the gallery to your list of managed SaaS apps.
To configure the integration of Exium into Microsoft Entra ID, you need to add Exium from the gallery to your list of managed SaaS apps.
To configure the integration of ExpenseIn into Microsoft Entra ID, you need to add ExpenseIn from the gallery to your list of managed SaaS apps.
To configure the integration of Expensify into Microsoft Entra ID, you need to add Expensify from the gallery to your list of managed SaaS apps.
To configure the integration of Experience Cloud into Microsoft Entra ID, you need to add Experience Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Expiration Reminder into Microsoft Entra ID, you need to add Expiration Reminder from the gallery to your list of managed SaaS apps.
To configure the integration of ExponentHR into Microsoft Entra ID, you need to add ExponentHR from the gallery to your list of managed SaaS apps.
To configure the integration of EZOfficeInventory into Microsoft Entra ID, you need to add EZOfficeInventory from the gallery to your list of managed SaaS apps.
To configure the integration of Ezra Coaching into Microsoft Entra ID, you need to add Ezra Coaching from the gallery to your list of managed SaaS apps.
To configure the integration of EZRentOut into Microsoft Entra ID, you need to add EZRentOut from the gallery to your list of managed SaaS apps.
To configure the integration of Fabric into Microsoft Entra ID, you need to add Fabric from the gallery to your list of managed SaaS apps.
To configure the integration of FactSet into Microsoft Entra ID, you need to add FactSet from the gallery to your list of managed SaaS apps.
To configure the integration of Fastly Edge Cloud into Microsoft Entra ID, you need to add Fastly Edge Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of FAX.PLUS into Microsoft Entra ID, you need to add FAX.PLUS from the gallery to your list of managed SaaS apps.
To configure the integration of FCM HUB into Microsoft Entra ID, you need to add FCM HUB from the gallery to your list of managed SaaS apps.
To configure the integration of FENCE-Mobile RemoteManager SSO into Microsoft Entra ID, you need to add FENCE-Mobile RemoteManager SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Fexa into Microsoft Entra ID, you need to add Fexa from the gallery to your list of managed SaaS apps.
To configure the integration of Fidelity PlanViewer into Microsoft Entra ID, you need to add Fidelity PlanViewer from the gallery to your list of managed SaaS apps.
To configure the integration of Field iD into Microsoft Entra ID, you need to add Field iD from the gallery to your list of managed SaaS apps.
To configure the integration of Fieldglass into Microsoft Entra ID, you need to add Fieldglass from the gallery to your list of managed SaaS apps.
To configure the integration of FigBytes into Microsoft Entra ID, you need to add FigBytes from the gallery to your list of managed SaaS apps.
To configure the integration of Figma into Microsoft Entra ID, you need to add Figma from the gallery to your list of managed SaaS apps.
To configure the integration of FileCloud into Microsoft Entra ID, you need to add FileCloud from the gallery to your list of managed SaaS apps.
To configure the integration of FileOrbis into Microsoft Entra ID, you need to add FileOrbis from the gallery to your list of managed SaaS apps.
**To add FilesAnywhere from the gallery, perform the following steps:**
To configure the integration of Finvari into Microsoft Entra ID, you need to add Finvari from the gallery to your list of managed SaaS apps.
To configure the integration of Firmex VDR into Microsoft Entra ID, you need to add Firmex VDR from the gallery to your list of managed SaaS apps.
To configure the integration of FirmPlay - Employee Advocacy for Recruiting into Microsoft Entra ID, you need to add FirmPlay - Employee Advocacy for Recruiting from the gallery to your list of managed SaaS apps.
To configure the integration of FiscalNote into Microsoft Entra ID, you need to add FiscalNote from the gallery to your list of managed SaaS apps.
To configure the integration of Five9 Plus Adapter (CTI, Contact Center Agents) into Microsoft Entra ID, you need to add Five9 Plus Adapter (CTI, Contact Center Agents) from the gallery to your list of managed SaaS apps.
To configure the integration of Fivetran into Microsoft Entra ID, you need to add Fivetran from the gallery to your list of managed SaaS apps.
**To add Flatter Files from the gallery, perform the following steps:**
To configure the integration of Flexera One into Microsoft Entra ID, you need to add Flexera One from the gallery to your list of managed SaaS apps.
To configure the integration of Float into Microsoft Entra ID, you need to add Float from the gallery to your list of managed SaaS apps.
To configure the integration of Flock Safety into Microsoft Entra ID, you need to add Flock Safety from the gallery to your list of managed SaaS apps.
To configure the integration of Flock into Microsoft Entra ID, you need to add Flock from the gallery to your list of managed SaaS apps.
To configure the integration of FloQast into Microsoft Entra ID, you need to add FloQast from the gallery to your list of managed SaaS apps.
To configure the integration of Fluxx Labs into Microsoft Entra ID, you need to add Fluxx Labs from the gallery to your list of managed SaaS apps.
To configure the integration of FM:Systems into Microsoft Entra ID, you need to add FM:Systems from the gallery to your list of managed SaaS apps.
To configure the integration of Foko Retail into Microsoft Entra ID, you need to add Foko Retail from the gallery to your list of managed SaaS apps.
To configure the integration of Folloze into Microsoft Entra ID, you need to add Folloze from the gallery to your list of managed SaaS apps.
To configure the integration of Foodee into Microsoft Entra ID, you need to add Foodee from the gallery to your list of managed SaaS apps.
To configure the integration of ForeSee CX Suite into Microsoft Entra ID, you need to add ForeSee CX Suite from the gallery to your list of managed SaaS apps.
To configure the integration of Form.com into Microsoft Entra ID, you need to add Form.com from the gallery to your list of managed SaaS apps.
To configure the integration of Fortes Change Cloud into Microsoft Entra ID, you need to add Fortes Change Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of FortiSASE into Microsoft Entra ID, you need to add FortiSASE from the gallery to your list of managed SaaS apps.
To configure the integration of foundU into Microsoft Entra ID, you need to add foundU from the gallery to your list of managed SaaS apps.
To configure the integration of Framer into Microsoft Entra ID, you need to add Framer from the gallery to your list of managed SaaS apps.
To configure the integration of Freedcamp into Microsoft Entra ID, you need to add Freedcamp from the gallery to your list of managed SaaS apps.
To configure the integration of Freightender SSO for TRP (Tender Response Platform) into Microsoft Entra ID, you need to add Freightender SSO for TRP (Tender Response Platform) from the gallery to your list of managed SaaS apps.
To configure the integration of Fresh Relevance into Microsoft Entra ID, you need to add Fresh Relevance from the gallery to your list of managed SaaS apps.
To configure the integration of FreshDesk into Microsoft Entra ID, you need to add FreshDesk from the gallery to your list of managed SaaS apps.
To configure the integration of FreshGrade into Microsoft Entra ID, you need to add FreshGrade from the gallery to your list of managed SaaS apps.
To configure the integration of Freshservice into Microsoft Entra ID, you need to add Freshservice from the gallery to your list of managed SaaS apps.
To configure the integration of Freshworks into Microsoft Entra ID, you need to add Freshworks from the gallery to your list of managed SaaS apps.
To configure the integration of Front into Microsoft Entra ID, you need to add Front from the gallery to your list of managed SaaS apps.
To configure the integration of Frontify into Microsoft Entra ID, you need to add Frontify from the gallery to your list of managed SaaS apps.
To configure the integration of Frontline Education into Microsoft Entra ID, you need to add Frontline Education from the gallery to your list of managed SaaS apps.
To configure the integration of Fulcrum into Microsoft Entra ID, you need to add Fulcrum from the gallery to your list of managed SaaS apps.
To configure the integration of Fuze into Microsoft Entra ID, you need to add Fuze from the gallery to your list of managed SaaS apps.
To configure the integration of GaggleAMP into Microsoft Entra ID, you need to add GaggleAMP from the gallery to your list of managed SaaS apps.
To configure the integration of gamba! into Microsoft Entra ID, you need to add gamba! from the gallery to your list of managed SaaS apps.
To configure the integration of Genius into Microsoft Entra ID, you need to add Genius from the gallery to your list of managed SaaS apps.
To configure the integration of Getabstract into Microsoft Entra ID, you need to add Getabstract from the gallery to your list of managed SaaS apps.
To configure the integration of GetThere into Microsoft Entra ID, you need to add GetThere from the gallery to your list of managed SaaS apps.
To configure the integration of Gigya into Microsoft Entra ID, you need to add Gigya from the gallery to your list of managed SaaS apps.
To configure the integration of GitHub Enterprise Server into Microsoft Entra ID, you need to add GitHub Enterprise Server from the gallery to your list of managed SaaS apps.
To configure the integration of GitHub Enterprise Managed User into Microsoft Entra ID, you need to add GitHub Enterprise Managed User from the gallery to your list of managed SaaS apps.
To configure the integration of GitHub into Microsoft Entra ID, you need to add GitHub from the gallery to your list of managed SaaS apps.
To configure the integration of GlassFrog into Microsoft Entra ID, you need to add GlassFrog from the gallery to your list of managed SaaS apps.
To configure the integration of Glia Hub into Microsoft Entra ID, you need to add Glia Hub from the gallery to your list of managed SaaS apps.
To configure the integration of Glint Inc into Microsoft Entra ID, you need to add Glint Inc from the gallery to your list of managed SaaS apps.
To configure the integration of EY GlobalOne into Microsoft Entra ID, you need to add EY GlobalOne from the gallery to your list of managed SaaS apps.
To configure the integration of GlobeSmart into Microsoft Entra ID, you need to add GlobeSmart from the gallery to your list of managed SaaS apps.
To configure the integration of GoalQuest into Microsoft Entra ID, you need to add GoalQuest from the gallery to your list of managed SaaS apps.
To configure the integration of GoLinks into Microsoft Entra ID, you need to add GoLinks from the gallery to your list of managed SaaS apps.
To configure the integration of Mind Tools Toolkit into Microsoft Entra ID, you need to add Mind Tools Toolkit from the gallery to your list of managed SaaS apps.
To configure the integration of Google Cloud / G Suite Connector by Microsoft into Microsoft Entra ID, you need to add Google Cloud / G Suite Connector by Microsoft from the gallery to your list of managed SaaS apps.
To configure the integration of GoProfiles into Microsoft Entra ID, you need to add GoProfiles from the gallery to your list of managed SaaS apps.
To configure the integration of GoSearch into Microsoft Entra ID, you need to add GoSearch from the gallery to your list of managed SaaS apps.
To configure the integration of GoTo into Microsoft Entra ID, you need to add GoTo from the gallery to your list of managed SaaS apps.
To configure the integration of gr8 People into Microsoft Entra ID, you need to add gr8 People from the gallery to your list of managed SaaS apps.
Now that you have your new group, you can apply the licenses that these partner users need.
To configure the integration of HRworks Single Sign-On into Microsoft Entra ID, you need to add HRworks Single Sign-On from the gallery to your list of managed SaaS apps.
To configure the integration of HSB ThoughtSpot into Microsoft Entra ID, you need to add HSB ThoughtSpot from the gallery to your list of managed SaaS apps.
To configure the integration of Hub Planner into Microsoft Entra ID, you need to add Hub Planner from the gallery to your list of managed SaaS apps.
To configure the integration of Hubble into Microsoft Entra ID, you need to add Hubble from the gallery to your list of managed SaaS apps.
To configure the integration of HubSpot into Microsoft Entra ID, you need to add HubSpot from the gallery to your list of managed SaaS apps.
To configure the integration of Huddle into Microsoft Entra ID, you need to add Huddle from the gallery to your list of managed SaaS apps.
To configure the integration of Humanage into Microsoft Entra ID, you need to add Humanage from the gallery to your list of managed SaaS apps.
To configure the integration of Hype into Microsoft Entra ID, you need to add Hype from the gallery to your list of managed SaaS apps.
To configure the integration of HyperAnna into Microsoft Entra ID, you need to add HyperAnna from the gallery to your list of managed SaaS apps.
To configure the integration of IamIP Platform into Microsoft Entra ID, you need to add IamIP Platform from the gallery to your list of managed SaaS apps.
To configure the integration of IANS Client Portal into Microsoft Entra ID, you need to add IANS Client Portal from the gallery to your list of managed SaaS apps.
To configure the integration of IBM Digital Business Automation on Cloud into Microsoft Entra ID, you need to add IBM Digital Business Automation on Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of IBMid into Microsoft Entra ID, you need to add IBMid from the gallery to your list of managed SaaS apps.
To configure the integration of IBM OpenPages into Microsoft Entra ID, you need to add IBM OpenPages from the gallery to your list of managed SaaS apps.
To configure the integration of ice Contact Center into Microsoft Entra ID, you need to add ice Contact Center from the gallery to your list of managed SaaS apps.
To configure the integration of IDC into Microsoft Entra ID, you need to add IDC from the gallery to your list of managed SaaS apps.
**To add IdeaScale from the gallery, perform the following steps:**
**To add iDiD Manager from the gallery, perform the following steps:**
To configure the integration of IDrive into Microsoft Entra ID, you need to add IDrive from the gallery to your list of managed SaaS apps.
To configure the integration of IDrive360 into Microsoft Entra ID, you need to add IDrive360 from the gallery to your list of managed SaaS apps.
To configure the integration of Igloo Software into Microsoft Entra ID, you need to add Igloo Software from the gallery to your list of managed SaaS apps.
To configure the integration of iGrafx Platform into Microsoft Entra ID, you need to add iGrafx Platform from the gallery to your list of managed SaaS apps.
To configure the integration of iHASCO Training into Microsoft Entra ID, you need to add iHASCO Training from the gallery to your list of managed SaaS apps.
To configure the integration of Illusive Networks into Microsoft Entra ID, you need to add Illusive Networks from the gallery to your list of managed SaaS apps.
To configure the integration of iLMS into Microsoft Entra ID, you need to add iLMS from the gallery to your list of managed SaaS apps.
To configure the integration of Image Relay into Microsoft Entra ID, you need to add Image Relay from the gallery to your list of managed SaaS apps.
**To add IMAGE WORKS from the gallery, perform the following steps:**
**To add Imagineer WebVision from the gallery, perform the following steps:**
To configure the integration of In Case of Crisis - Mobile into Microsoft Entra ID, you need to add In Case of Crisis - Mobile from the gallery to your list of managed SaaS apps.
To configure the integration of In Case of Crisis - Online Portal into Microsoft Entra ID, you need to add In Case of Crisis - Online Portal from the gallery to your list of managed SaaS apps.
To configure the integration of Infinite Campus into Microsoft Entra ID, you need to add Infinite Campus from the gallery to your list of managed SaaS apps.
To configure the integration of InfinityQS ProFicient on Demand into Microsoft Entra ID, you need to add InfinityQS ProFicient on Demand from the gallery to your list of managed SaaS apps.
To configure the integration of Infogix Data3Sixty Govern into Microsoft Entra ID, you need to add Infogix Data3Sixty Govern from the gallery to your list of managed SaaS apps.
To configure the integration of Infor CloudSuite into Microsoft Entra ID, you need to add Infor CloudSuite from the gallery to your list of managed SaaS apps.
To configure the integration of InformaCast into Microsoft Entra ID, you need to add InformaCast from the gallery to your list of managed SaaS apps.
To configure the integration of Informatica Platform into Microsoft Entra ID, you need to add Informatica Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Infor Retail – Information Management into Microsoft Entra ID, you need to add Infor Retail – Information Management from the gallery to your list of managed SaaS apps.
To configure the integration of Infrascale Cloud Backup into Microsoft Entra ID, you need to add Infrascale Cloud Backup from the gallery to your list of managed SaaS apps.
To configure the integration of Inkling / EchoInk into Microsoft Entra ID, you need to add Inkling / EchoInk from the gallery to your list of managed SaaS apps.
To configure the integration of Innotas into Microsoft Entra ID, you need to add Innotas from the gallery to your list of managed SaaS apps.
To configure the integration of Innoverse into Microsoft Entra ID, you need to add Innoverse from the gallery to your list of managed SaaS apps.
To configure the integration of Insider into Microsoft Entra ID, you need to add Insider from the gallery to your list of managed SaaS apps.
**To add Insider Track from the gallery, perform the following steps:**
To configure the integration of Insight4GRC into Microsoft Entra ID, you need to add Insight4GRC from the gallery to your list of managed SaaS apps.
To configure the integration of Insightsfirst into Microsoft Entra ID, you need to add Insightsfirst from the gallery to your list of managed SaaS apps.
**To add Insperity ExpensAble from the gallery, perform the following steps:**
**To add InstaVR Viewer from the gallery, perform the following steps:**
To configure the integration of insuite into Microsoft Entra ID, you need to add insuite from the gallery to your list of managed SaaS apps.
To configure the integration of Sage Intacct into Microsoft Entra ID, you need to add Sage Intacct from the gallery to your list of managed SaaS apps.
To configure the integration of IntelligenceBank into Microsoft Entra ID, you need to add IntelligenceBank from the gallery to your list of managed SaaS apps.
To configure the integration of International SOS Assistance Products into Microsoft Entra ID, you need to add International SOS Assistance Products from the gallery to your list of managed SaaS apps.
To configure the integration of InTime into Microsoft Entra ID, you need to add InTime from the gallery to your list of managed SaaS apps.
To configure the integration of Intralinks into Microsoft Entra ID, you need to add Intralinks from the gallery to your list of managed SaaS apps.
To configure the integration of IntSights into Microsoft Entra ID, you need to add IntSights from the gallery to your list of managed SaaS apps.
To configure the integration of InVision into Microsoft Entra ID, you need to add InVision from the gallery to your list of managed SaaS apps.
To configure the integration of IP Platform into Microsoft Entra ID, you need to add IP Platform from the gallery to your list of managed SaaS apps.
To configure the integration of iPass SmartConnect into Microsoft Entra ID, you need to add iPass SmartConnect from the gallery to your list of managed SaaS apps.
To configure the integration of iPoint Service Provider into Microsoft Entra ID, you need to add iPoint Service Provider from the gallery to your list of managed SaaS apps.
To configure the integration of IQNavigator VMS into Microsoft Entra ID, you need to add IQNavigator VMS from the gallery to your list of managed SaaS apps.
To configure the integration of iQualify LMS into Microsoft Entra ID, you need to add iQualify LMS from the gallery to your list of managed SaaS apps.
To configure the integration of Iris Intranet into Microsoft Entra ID, you need to add Iris Intranet from the gallery to your list of managed SaaS apps.
To configure the integration of iSAMS into Microsoft Entra ID, you need to add iSAMS from the gallery to your list of managed SaaS apps.
To configure the integration of iServer Portal into Microsoft Entra ID, you need to add iServer Portal from the gallery to your list of managed SaaS apps.
To configure the integration of i-Sight into Microsoft Entra ID, you need to add i-Sight from the gallery to your list of managed SaaS apps.
To configure the integration of ITRP into Microsoft Entra ID, you need to add ITRP from the gallery to your list of managed SaaS apps.
To configure the integration of itslearning into Microsoft Entra ID, you need to add itslearning from the gallery to your list of managed SaaS apps.
To configure the integration of Ivanti Service Manager (ISM) into Microsoft Entra ID, you need to add Ivanti Service Manager (ISM) from the gallery to your list of managed SaaS apps.
To configure the integration of IVM Smarthub into Microsoft Entra ID, you need to add IVM Smarthub from the gallery to your list of managed SaaS apps.
To configure the integration of iWellnessNow into Microsoft Entra ID, you need to add iWellnessNow from the gallery to your list of managed SaaS apps.
To configure the integration of IWT Procurement Suite into Microsoft Entra ID, you need to add IWT Procurement Suite from the gallery to your list of managed SaaS apps.
To configure the integration of Jasper AI into Microsoft Entra ID, you need to add Jasper AI from the gallery to your list of managed SaaS apps.
To configure the integration of Javelo into Microsoft Entra ID, you need to add Javelo from the gallery to your list of managed SaaS apps.
To configure the integration of JDA Cloud into Microsoft Entra ID, you need to add JDA Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Jedox into Microsoft Entra ID, you need to add Jedox from the gallery to your list of managed SaaS apps.
To configure the integration of JFrog Artifactory into Microsoft Entra ID, you need to add JFrog Artifactory from the gallery to your list of managed SaaS apps.
To configure the integration of Jitbit Helpdesk into Microsoft Entra ID, you need to add Jitbit Helpdesk from the gallery to your list of managed SaaS apps.
To configure the integration of Jive into Microsoft Entra ID, you need to add Jive from the gallery to your list of managed SaaS apps.
To configure the integration of JLL TRIRIGA into Microsoft Entra ID, you need to add JLL TRIRIGA from the gallery to your list of managed SaaS apps.
To configure the integration of Jobbadmin into Microsoft Entra ID, you need to add Jobbadmin from the gallery to your list of managed SaaS apps.
To configure the integration of JOBHUB into Microsoft Entra ID, you need to add JOBHUB from the gallery to your list of managed SaaS apps.
To configure the integration of JobScore into Microsoft Entra ID, you need to add JobScore from the gallery to your list of managed SaaS apps.
To configure the integration of JoinedUp into Microsoft Entra ID, you need to add JoinedUp from the gallery to your list of managed SaaS apps.
**To add join.me from the gallery, perform the following steps:**
To configure the integration of Jooto into Microsoft Entra ID, you need to add Jooto from the gallery to your list of managed SaaS apps.
To configure the integration of JOSA into Microsoft Entra ID, you need to add JOSA from the gallery to your list of managed SaaS apps.
To configure the integration of Jostle into Microsoft Entra ID, you need to add Jostle from the gallery to your list of managed SaaS apps.
To configure the integration of Juno Journey into Microsoft Entra ID, you need to add Juno Journey from the gallery to your list of managed SaaS apps.
To configure the integration of JuriBlox into Microsoft Entra ID, you need to add JuriBlox from the gallery to your list of managed SaaS apps.
To configure the integration of Kairos Business into Microsoft Entra ID, you need to add Kairos Business from the gallery to your list of managed SaaS apps.
To configure the integration of Kantega SSO for Bamboo into Microsoft Entra ID, you need to add Kantega SSO for Bamboo from the gallery to your list of managed SaaS apps.
To configure the integration of Kantega SSO for Bitbucket into Microsoft Entra ID, you need to add Kantega SSO for Bitbucket from the gallery to your list of managed SaaS apps.
To configure the integration of Kantega SSO for Confluence into Microsoft Entra ID, you need to add Kantega SSO for Confluence from the gallery to your list of managed SaaS apps.
To configure the integration of Kantega SSO for FishEye/Crucible into Microsoft Entra ID, you need to add Kantega SSO for FishEye/Crucible from the gallery to your list of managed SaaS apps.
To configure the integration of Kantega SSO for JIRA into Microsoft Entra ID, you need to add Kantega SSO for JIRA from the gallery to your list of managed SaaS apps.
To configure the integration of Kao Navi into Microsoft Entra ID, you need to add Kao Navi from the gallery to your list of managed SaaS apps.
To configure the integration of Keepabl into Microsoft Entra ID, you need to add Keepabl from the gallery to your list of managed SaaS apps.
To configure the integration of Kemp LoadMaster Microsoft Entra integration into Microsoft Entra ID, you need to add Kemp LoadMaster Microsoft Entra integration from the gallery to your list of managed SaaS apps.
To configure the integration of Kendis - Microsoft Entra Integration into Microsoft Entra ID, you need to add Kendis - Microsoft Entra Integration from the gallery to your list of managed SaaS apps.
To configure the integration of IBM Kenexa Survey Enterprise into Microsoft Entra ID, you need to add IBM Kenexa Survey Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of F5 into Microsoft Entra ID, you need to add F5 from the gallery to your list of managed SaaS apps.
To configure the integration of Keystone into Microsoft Entra ID, you need to add Keystone from the gallery to your list of managed SaaS apps.
To configure the integration of KFAdvance into Microsoft Entra ID, you need to add KFAdvance from the gallery to your list of managed SaaS apps.
To configure the integration of Khoros Care into Microsoft Entra ID, you need to add Khoros Care from the gallery to your list of managed SaaS apps.
**To add Kindling from the gallery, perform the following steps:**
To configure the integration of Kintone into Microsoft Entra ID, you need to add Kintone from the gallery to your list of managed SaaS apps.
To configure the integration of Kiteworks into Microsoft Entra ID, you need to add Kiteworks from the gallery to your list of managed SaaS apps.
To configure the integration of Klue into Microsoft Entra ID, you need to add Klue from the gallery to your list of managed SaaS apps.
To configure the integration of KnowBe4 into Microsoft Entra ID, you need to add KnowBe4 from the gallery to your list of managed SaaS apps.
To configure the integration of Knowledge Anywhere LMS into Microsoft Entra ID, you need to add Knowledge Anywhere LMS from the gallery to your list of managed SaaS apps.
To configure the integration of KnowledgeOwl into Microsoft Entra ID, you need to add KnowledgeOwl from the gallery to your list of managed SaaS apps.
To configure the integration of Kofax TotalAgility into Microsoft Entra ID, you need to add Kofax TotalAgility from the gallery to your list of managed SaaS apps.
To configure the integration of Kontiki into Microsoft Entra ID, you need to add Kontiki from the gallery to your list of managed SaaS apps.
To configure the integration of Korn Ferry 360 into Microsoft Entra ID, you need to add Korn Ferry 360 from the gallery to your list of managed SaaS apps.
To configure the integration of Korn Ferry ALP into Microsoft Entra ID, you need to add Korn Ferry ALP from the gallery to your list of managed SaaS apps.
To configure the integration of kpifire into Microsoft Entra ID, you need to add kpifire from the gallery to your list of managed SaaS apps.
To configure the integration of KPMG Leasing Tool into Microsoft Entra ID, you need to add KPMG Leasing Tool from the gallery to your list of managed SaaS apps.
To configure the integration of Kronos into Microsoft Entra ID, you need to add Kronos from the gallery to your list of managed SaaS apps.
To configure the integration of Kronos Workforce Dimensions into Microsoft Entra ID, you need to add Kronos Workforce Dimensions from the gallery to your list of managed SaaS apps.
To configure the integration of Kudos into Microsoft Entra ID, you need to add Kudos from the gallery to your list of managed SaaS apps.
To configure the integration of Kumolus into Microsoft Entra ID, you need to add Kumolus from the gallery to your list of managed SaaS apps.
To configure the integration of Land Gorilla into Microsoft Entra ID, you need to add Land Gorilla from the gallery to your list of managed SaaS apps.
To configure the integration of LanSchool Air into Microsoft Entra ID, you need to add LanSchool Air from the gallery to your list of managed SaaS apps.
To configure the integration of Lattice into Microsoft Entra ID, you need to add Lattice from the gallery to your list of managed SaaS apps.
To configure the integration of LawVu into Microsoft Entra ID, you need to add LawVu from the gallery to your list of managed SaaS apps.
To configure the integration of LCVista into Microsoft Entra ID, you need to add LCVista from the gallery to your list of managed SaaS apps.
To configure the integration of Leadfamly into Microsoft Entra ID, you need to add Leadfamly from the gallery to your list of managed SaaS apps.
**To add Lean from the gallery, perform the following steps:**
To configure the integration of Leapsome into Microsoft Entra ID, you need to add Leapsome from the gallery to your list of managed SaaS apps.
To configure the integration of Learning at Work into Microsoft Entra ID, you need to add Learning at Work from the gallery to your list of managed SaaS apps.
To configure the integration of Learning Seat LMS into Microsoft Entra ID, you need to add Learning Seat LMS from the gallery to your list of managed SaaS apps.
To configure the integration of Learnster into Microsoft Entra ID, you need to add Learnster from the gallery to your list of managed SaaS apps.
To configure the integration of LearnUpon into Microsoft Entra ID, you need to add LearnUpon from the gallery to your list of managed SaaS apps.
**To add Lecorpio from the gallery, perform the following steps:**
To configure the integration of Lenses.io into Microsoft Entra ID, add Lenses.io to your list of managed SaaS apps:
To configure the integration of Lessonly into Microsoft Entra ID, you need to add Lessonly from the gallery to your list of managed SaaS apps.
To configure the integration of Lexion into Microsoft Entra ID, you need to add Lexion from the gallery to your list of managed SaaS apps.
To configure the integration of Lexonis TalentScape into Microsoft Entra ID, you need to add Lexonis TalentScape from the gallery to your list of managed SaaS apps.
To configure the integration of LifeSight into Microsoft Entra ID, you need to add LifeSight from the gallery to your list of managed SaaS apps.
To configure the integration of Lifesize Cloud into Microsoft Entra ID, you need to add Lifesize Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of LIFT into Microsoft Entra ID, you need to add LIFT from the gallery to your list of managed SaaS apps.
To configure the integration of LinkedIn Talent Solutions into Microsoft Entra ID, you need to add LinkedIn Talent Solutions from the gallery to your list of managed SaaS apps.
To configure the integration of LinkedIn Elevate into Microsoft Entra ID, you need to add LinkedIn Elevate from the gallery to your list of managed SaaS apps.
To configure the integration of LinkedIn Learning into Microsoft Entra ID, you need to add LinkedIn Learning from the gallery to your list of managed SaaS apps.
To configure the integration of LinkedIn Sales Navigator into Microsoft Entra ID, you need to add LinkedIn Sales Navigator from the gallery to your list of managed SaaS apps.
To configure the integration of LiquidFiles into Microsoft Entra ID, you need to add LiquidFiles from the gallery to your list of managed SaaS apps.
To configure the integration of SAP Litmos into Microsoft Entra ID, you need to add SAP Litmos from the gallery to your list of managed SaaS apps.
To configure the integration of Litmus into Microsoft Entra ID, you need to add Litmus from the gallery to your list of managed SaaS apps.
To configure the integration of LKTransfer into Microsoft Entra ID, you need to add LKTransfer from the gallery to your list of managed SaaS apps.
To configure the integration of LMS and Education Management System Leaf into Microsoft Entra ID, you need to add LMS and Education Management System Leaf from the gallery to your list of managed SaaS apps.
To configure the integration of Looker Analytics Platform into Microsoft Entra ID, you need to add Looker Analytics Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Lookout Secure Access into Microsoft Entra ID, you need to add Lookout Secure Access from the gallery to your list of managed SaaS apps.
To configure the integration of Loop Flow CRM into Microsoft Entra ID, you need to add Loop Flow CRM from the gallery to your list of managed SaaS apps.
To configure the integration of Lucid (All Products) into Microsoft Entra ID, you need to add Lucid (All Products) from the gallery to your list of managed SaaS apps.
To configure the integration of Lucidchart into Microsoft Entra ID, you need to add Lucidchart from the gallery to your list of managed SaaS apps.
To configure the integration of LUSID into Microsoft Entra ID, you need to add LUSID from the gallery to your list of managed SaaS apps.
To configure the integration of Luum into Microsoft Entra ID, you need to add Luum from the gallery to your list of managed SaaS apps.
To configure the integration of Lynda.com into Microsoft Entra ID, you need to add Lynda.com from the gallery to your list of managed SaaS apps.
To configure the integration of Lyve Cloud into Microsoft Entra ID, you need to add Lyve Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of M-Files into Microsoft Entra ID, you need to add M-Files from the gallery to your list of managed SaaS apps.
To configure the integration of Mail Luck! into Microsoft Entra ID, you need to add Mail Luck! from the gallery to your list of managed SaaS apps.
To configure the integration of MailGates into Microsoft Entra ID, you need to add MailGates from the gallery to your list of managed SaaS apps.
To configure the integration of Mailosaur into Microsoft Entra ID, you need to add Mailosaur from the gallery to your list of managed SaaS apps.
To configure the integration of MAMORIO Biz into Microsoft Entra ID, you need to add MAMORIO Biz from the gallery to your list of managed SaaS apps.
To configure the integration of Manabi Pocket into Microsoft Entra ID, you need to add Manabi Pocket from the gallery to your list of managed SaaS apps.
To configure the integration of Manifestly Checklists into Microsoft Entra ID, you need to add Manifestly Checklists from the gallery to your list of managed SaaS apps.
To configure the integration of Mapbox into Microsoft Entra ID, you need to add Mapbox from the gallery to your list of managed SaaS apps.
To configure the integration of Maptician into Microsoft Entra ID, you need to add Maptician from the gallery to your list of managed SaaS apps.
To configure the integration of Marker.io into Microsoft Entra ID, you need to add Marker.io from the gallery to your list of managed SaaS apps.
To configure the integration of Marketo into Microsoft Entra ID, you need to add Marketo from the gallery to your list of managed SaaS apps.
To configure the integration of MaxxPoint into Microsoft Entra ID, you need to add MaxxPoint from the gallery to your list of managed SaaS apps.
To configure the integration of MCM into Microsoft Entra ID, you need to add MCM from the gallery to your list of managed SaaS apps.
To configure the integration of MDComune Business into Microsoft Entra ID, you need to add MDComune Business from the gallery to your list of managed SaaS apps.
To configure the integration of MemoMeister into Microsoft Entra ID, you need to add MemoMeister from the gallery to your list of managed SaaS apps.
To configure the integration of Mend.io into Microsoft Entra ID, you need to add Mend.io from the gallery to your list of managed SaaS apps.
To configure the integration of Meraki Dashboard into Microsoft Entra ID, you need to add Meraki Dashboard from the gallery to your list of managed SaaS apps.
To configure the integration of Mercell into Microsoft Entra ID, you need to add Mercell from the gallery to your list of managed SaaS apps.
**To add Mercer BenefitsCentral (MBC) from the gallery, perform the following steps:**
To configure the integration of Meta Work Accounts into Microsoft Entra ID, you need to add Meta Work Accounts from the gallery to your list of managed SaaS apps.
To configure the integration of Meta4 Global HR into Microsoft Entra ID, you need to add Meta4 Global HR from the gallery to your list of managed SaaS apps.
To configure the integration of Meta Networks Connector into Microsoft Entra ID, you need to add Meta Networks Connector from the gallery to your list of managed SaaS apps.
To configure the integration of Metatask into Microsoft Entra ID, you need to add Metatask from the gallery to your list of managed SaaS apps.
To configure the integration of MetLife Legal Plans Member App into Microsoft Entra ID, you need to add MetLife Legal Plans Member App from the gallery to your list of managed SaaS apps.
To configure the integration of Mevisio into Microsoft Entra ID, you need to add Mevisio from the gallery to your list of managed SaaS apps.
To configure the integration of MIC SAAS Portal into Microsoft Entra ID, you need to add MIC SAAS Portal from the gallery to your list of managed SaaS apps.
To configure the integration of Michigan Data Hub Single Sign-On into Microsoft Entra ID, you need to add Michigan Data Hub Single Sign-On from the gallery to your list of managed SaaS apps.
To configure the integration of MiHCM into Microsoft Entra ID, you need to add MiHCM from the gallery to your list of managed SaaS apps.
To configure the integration of Mimecast into Microsoft Entra ID, you need to add Mimecast from the gallery to your list of managed SaaS apps.
To configure the integration of Learn into Microsoft Entra ID, you need to add Learn from the gallery to your list of managed SaaS apps.
To configure the integration of MindTickle into Microsoft Entra ID, you need to add MindTickle from the gallery to your list of managed SaaS apps.
To configure the integration of mindWireless into Microsoft Entra ID, you need to add mindWireless from the gallery to your list of managed SaaS apps.
To configure the integration of Miro into Microsoft Entra ID, you need to add Miro from the gallery to your list of managed SaaS apps.
To configure the integration of Mist Cloud Admin SSO into Microsoft Entra ID, you need to add Mist Cloud Admin SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Mixpanel into Microsoft Entra ID, you need to add Mixpanel from the gallery to your list of managed SaaS apps.
To configure the integration of MOBI into Microsoft Entra ID, you need to add MOBI from the gallery to your list of managed SaaS apps.
To configure the integration of MobiControl into Microsoft Entra ID, you need to add MobiControl from the gallery to your list of managed SaaS apps.
To configure the integration of Mobile Locker into Microsoft Entra ID, you need to add Mobile Locker from the gallery to your list of managed SaaS apps.
To configure the integration of MobileIron into Microsoft Entra ID, you need to add MobileIron from the gallery to your list of managed SaaS apps.
To configure the integration of Mobile Xpense into Microsoft Entra ID, you need to add Mobile Xpense from the gallery to your list of managed SaaS apps.
To configure the integration of moconavi into Microsoft Entra ID, you need to add moconavi from the gallery to your list of managed SaaS apps.
To configure the integration of Momenta into Microsoft Entra ID, you need to add Momenta from the gallery to your list of managed SaaS apps.
To configure the integration of monday.com into Microsoft Entra ID, you need to add monday.com from the gallery to your list of managed SaaS apps.
**To add Montage Online from the gallery, perform the following steps:**
To configure the integration of Moqups into Microsoft Entra ID, you need to add Moqups from the gallery to your list of managed SaaS apps.
To configure the integration of Mosaic Project Operations into Microsoft Entra ID, you need to add Mosaic Project Operations from the gallery to your list of managed SaaS apps.
To configure the integration of Motus into Microsoft Entra ID, you need to add Motus from the gallery to your list of managed SaaS apps.
To configure the integration of MOVEit Transfer - Microsoft Entra integration into Microsoft Entra ID, you need to add MOVEit Transfer - Microsoft Entra integration from the gallery to your list of managed SaaS apps.
To configure the integration of Movement by project44 into Microsoft Entra ID, you need to add Movement by project44 from the gallery to your list of managed SaaS apps.
To configure the integration of Moveworks into Microsoft Entra ID, you need to add Moveworks from the gallery to your list of managed SaaS apps.
To configure the integration of Moxi Engage into Microsoft Entra ID, you need to add Moxi Engage from the gallery to your list of managed SaaS apps.
To configure the integration of Moxtra into Microsoft Entra ID, you need to add Moxtra from the gallery to your list of managed SaaS apps.
**To add Mozy Enterprise from the gallery, perform the following steps:**
To configure the integration of MS Azure SSO Access for Ethidex Compliance Office™ into Microsoft Entra ID, you need to add MS Azure SSO Access for Ethidex Compliance Office™ from the gallery to your list of managed SaaS apps.
To configure the integration of Mural Identity into Microsoft Entra ID, you need to add Mural Identity from the gallery to your list of managed SaaS apps.
To configure the integration of My IBISWorld into Microsoft Entra ID, you need to add My IBISWorld from the gallery to your list of managed SaaS apps.
To configure the integration of myAOS into Microsoft Entra ID, you need to add myAOS from the gallery to your list of managed SaaS apps.
To configure the integration of MyAryaka into Microsoft Entra ID, you need to add MyAryaka from the gallery to your list of managed SaaS apps.
To configure the integration of My Award Points Top Sub/Top Team into Microsoft Entra ID, you need to add My Award Points Top Sub/Top Team from the gallery to your list of managed SaaS apps.
To configure the integration of MyGeotab into Microsoft Entra ID, you need to add MyGeotab from the gallery to your list of managed SaaS apps.
To configure the integration of myPolicies into Microsoft Entra ID, you need to add myPolicies from the gallery to your list of managed SaaS apps.
To configure the integration of MyVR into Microsoft Entra ID, you need to add MyVR from the gallery to your list of managed SaaS apps.
To configure the integration of MyWorkDrive into Microsoft Entra ID, you need to add MyWorkDrive from the gallery to your list of managed SaaS apps.
To configure the integration of Namely into Microsoft Entra ID, you need to add Namely from the gallery to your list of managed SaaS apps.
To configure the integration of Nature Research into Microsoft Entra ID, you need to add Nature Research from the gallery to your list of managed SaaS apps.
To configure the integration of Navan into Microsoft Entra ID, you need to add Navan from the gallery to your list of managed SaaS apps.
To configure the integration of NAVEX IRM (Lockpath/Keylight) into Microsoft Entra ID, you need to add NAVEX IRM (Lockpath/Keylight) from the gallery to your list of managed SaaS apps.
To configure the integration of NAVEX One into Microsoft Entra ID, you need to add NAVEX One from the gallery to your list of managed SaaS apps.
To configure the integration of NegometrixPortal Single Sign On (SSO) into Microsoft Entra ID, you need to add NegometrixPortal Single Sign On (SSO) from the gallery to your list of managed SaaS apps.
To configure the integration of NEOGOV into Microsoft Entra ID, you need to add NEOGOV from the gallery to your list of managed SaaS apps.
To configure the integration of Neota into Microsoft Entra ID, you need to add Neota from the gallery to your list of managed SaaS apps.
To configure the integration of NetCloud Manager into Microsoft Entra ID, you need to add NetCloud Manager from the gallery to your list of managed SaaS apps.
To configure the integration of NetDocuments into Microsoft Entra ID, you need to add NetDocuments from the gallery to your list of managed SaaS apps.
To configure the integration of NetMotion Mobility into Microsoft Entra ID, you need to add NetMotion Mobility from the gallery to your list of managed SaaS apps.
To configure the integration of Netop Portal into Microsoft Entra ID, you need to add Netop Portal from the gallery to your list of managed SaaS apps.
To configure the integration of NetSfere into Microsoft Entra ID, you need to add NetSfere from the gallery to your list of managed SaaS apps.
To configure the integration of Invicti into Microsoft Entra ID, you need to add Invicti from the gallery to your list of managed SaaS apps.
To configure the integration of NetSuite into Microsoft Entra ID, add NetSuite from the gallery to your list of managed SaaS apps by doing the following:
To configure the integration of Netvision Compas into Microsoft Entra ID, you need to add Netvision Compas from the gallery to your list of managed SaaS apps.
To configure the integration of Neustar UltraDNS into Microsoft Entra ID, you need to add Neustar UltraDNS from the gallery to your list of managed SaaS apps.
To configure the integration of New Relic into Microsoft Entra ID, you need to add **New Relic (By Organization)** from the gallery to your list of managed SaaS apps.
To configure the integration of New Relic by Account into Microsoft Entra ID, you need to add New Relic by Account from the gallery to your list of managed SaaS apps.
To configure the integration of Cloud Management Portal for Microsoft Azure into Microsoft Entra ID, you need to add Cloud Management Portal for Microsoft Azure from the gallery to your list of managed SaaS apps.
**To add Nexonia from the gallery, perform the following steps:**
To configure the integration of Nexsure into Microsoft Entra ID, you need to add Nexsure from the gallery to your list of managed SaaS apps.
To configure the integration of NICE CXone into Microsoft Entra ID, you need to add NICE CXone from the gallery to your list of managed SaaS apps.
To configure the integration of Nimblex into Microsoft Entra ID, you need to add Nimblex from the gallery to your list of managed SaaS apps.
To configure the integration of Nimbus into Microsoft Entra ID, you need to add Nimbus from the gallery to your list of managed SaaS apps.
To configure the integration of Nitro Productivity Suite into Microsoft Entra ID, you need to add Nitro Productivity Suite from the gallery to your list of managed SaaS apps.
To configure the integration of Nodetrax Project into Microsoft Entra ID, you need to add Nodetrax Project from the gallery to your list of managed SaaS apps.
To configure the integration of Nomadesk into Microsoft Entra ID, you need to add Nomadesk from the gallery to your list of managed SaaS apps.
**To add Nomadic from the gallery, perform the following steps:**
To configure the integration of Notion into Microsoft Entra ID, you need to add Notion from the gallery to your list of managed SaaS apps.
To configure the integration of Novatus into Microsoft Entra ID, you need to add Novatus from the gallery to your list of managed SaaS apps.
To configure the integration of NS1 SSO for Azure into Microsoft Entra ID, you need to add NS1 SSO for Azure from the gallery to your list of managed SaaS apps.
To configure the integration of Nuclino into Microsoft Entra ID, you need to add Nuclino from the gallery to your list of managed SaaS apps.
To configure the integration of Nulab Pass into Microsoft Entra ID, add Nulab Pass from the gallery to your list of managed SaaS apps.
To configure the integration of NumlyEngage™ into Microsoft Entra ID, you need to add NumlyEngage™ from the gallery to your list of managed SaaS apps.
To configure the integration of ObservePoint into Microsoft Entra ID, you need to add ObservePoint from the gallery to your list of managed SaaS apps.
To configure the integration of O.C. Tanner - AppreciateHub into Microsoft Entra ID, you need to add O.C. Tanner - AppreciateHub from the gallery to your list of managed SaaS apps.
To configure the integration of Ocurus into Microsoft Entra ID, you need to add Ocurus from the gallery to your list of managed SaaS apps.
1. Select the ellipses **(...)** at the end of the row in the table.
To configure the integration of Olfeo SAAS into Microsoft Entra ID, you need to add Olfeo SAAS from the gallery to your list of managed SaaS apps.
To configure the integration of OneDesk into Microsoft Entra ID, you need to add OneDesk from the gallery to your list of managed SaaS apps.
To configure the integration of OneStream into Microsoft Entra ID, you need to add OneStream from the gallery to your list of managed SaaS apps.
To configure the integration of Oneteam into Microsoft Entra ID, you need to add Oneteam from the gallery to your list of managed SaaS apps.
To configure the integration of Onit into Microsoft Entra ID, you need to add Onit from the gallery to your list of managed SaaS apps.
To configure the integration of OnPage (SSO) into Microsoft Entra ID, you need to add OnPage (SSO) from the gallery to your list of managed SaaS apps.
To configure the integration of Onshape into Microsoft Entra ID, you need to add Onshape from the gallery to your list of managed SaaS apps.
**To add OnTrack from the gallery, perform the following steps:**
To configure the integration of Onyxia into Microsoft Entra ID, you need to add Onyxia from the gallery to your list of managed SaaS apps.
To configure the integration of Opal into Microsoft Entra ID, you need to add Opal from the gallery to your list of managed SaaS apps.
To configure the integration of OpenAthens into Microsoft Entra ID, you need to add OpenAthens from the gallery to your list of managed SaaS apps.
To configure the integration of OpsGenie into Microsoft Entra ID, you need to add OpsGenie from the gallery to your list of managed SaaS apps.
To configure the integration of Oracle Cloud Infrastructure Console into Microsoft Entra ID, you need to add Oracle Cloud Infrastructure Console from the gallery to your list of managed SaaS apps.
To configure the integration of Oracle Fusion ERP into Microsoft Entra ID, you need to add Oracle Fusion ERP from the gallery to your list of managed SaaS apps.
To configure the integration of OrgChart Now into Microsoft Entra ID, you need to add OrgChart Now from the gallery to your list of managed SaaS apps.
To configure the integration of OrgVitality SSO into Microsoft Entra ID, you need to add OrgVitality SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Origami into Microsoft Entra ID, you need to add Origami from the gallery to your list of managed SaaS apps.
To configure the integration of Othership Workplace Scheduler into Microsoft Entra ID, you need to add Othership Workplace Scheduler from the gallery to your list of managed SaaS apps.
**To add OU Campus from the gallery, perform the following steps:**
To configure the integration of OutSystems Microsoft Entra ID into Microsoft Entra ID, you need to add OutSystems Microsoft Entra ID from the gallery to your list of managed SaaS apps.
To configure the integration of Overdrive into Microsoft Entra ID, add Overdrive from the gallery to your list of managed SaaS apps by doing the following:
**To add Pacific Timesheet from the gallery, perform the following steps:**
To configure the integration of PageDNA into Microsoft Entra ID, you need to add PageDNA from the gallery to your list of managed SaaS apps.
To configure the integration of PagerDuty into Microsoft Entra ID, you need to add PagerDuty from the gallery to your list of managed SaaS apps.
To configure the integration of Palantir Foundry into Microsoft Entra ID, you need to add Palantir Foundry from the gallery to your list of managed SaaS apps.
To configure the integration of Palo Alto Networks - Admin UI into Microsoft Entra ID, you need to add Palo Alto Networks - Admin UI from the gallery to your list of managed SaaS apps.
To configure the integration of Palo Alto Networks - Aperture into Microsoft Entra ID, you need to add Palo Alto Networks - Aperture from the gallery to your list of managed SaaS apps.
To configure the integration of Palo Alto Networks Captive Portal into Microsoft Entra ID, you need to add Palo Alto Networks Captive Portal from the gallery to your list of managed SaaS apps.
To configure the integration of PandaDoc into Microsoft Entra ID, you need to add PandaDoc from the gallery to your list of managed SaaS apps.
To configure the integration of Panopto into Microsoft Entra ID, you need to add Panopto from the gallery to your list of managed SaaS apps.
To configure the integration of Panorama9 into Microsoft Entra ID, you need to add Panorama9 from the gallery to your list of managed SaaS apps.
To configure the integration of Panorays into Microsoft Entra ID, you need to add Panorays from the gallery to your list of managed SaaS apps.
To configure the integration of Pantheon into Microsoft Entra ID, you need to add Pantheon from the gallery to your list of managed SaaS apps.
To configure the integration of Parkalot - Car park management into Microsoft Entra ID, you need to add Parkalot - Car park management from the gallery to your list of managed SaaS apps.
To configure the integration of ParkHere Corporate into Microsoft Entra ID, you need to add ParkHere Corporate from the gallery to your list of managed SaaS apps.
To configure the integration of PatentSQUARE into Microsoft Entra ID, you need to add PatentSQUARE from the gallery to your list of managed SaaS apps.
To configure the integration of Pavaso Digital Close into Microsoft Entra ID, you need to add Pavaso Digital Close from the gallery to your list of managed SaaS apps.
To configure the integration of PayCargo Classic into Microsoft Entra ID, you need to add PayCargo Classic from the gallery to your list of managed SaaS apps.
To configure the integration of Paylocity into Microsoft Entra ID, you need to add Paylocity from the gallery to your list of managed SaaS apps.
To configure the integration of Peakon into Microsoft Entra ID, you need to add Peakon from the gallery to your list of managed SaaS apps.
To configure the integration of Pega Systems into Microsoft Entra ID, you need to add Pega Systems from the gallery to your list of managed SaaS apps.
To configure the integration of Pendo into Microsoft Entra ID, you need to add Pendo from the gallery to your list of managed SaaS apps.
To configure the integration of Penji into Microsoft Entra ID, you need to add Penji from the gallery to your list of managed SaaS apps.
To configure the integration of People into Microsoft Entra ID, you need to add People from the gallery to your list of managed SaaS apps.
To configure the integration of Peoplecart into Microsoft Entra ID, you need to add Peoplecart from the gallery to your list of managed SaaS apps.
To configure the integration of Per Angusta into Microsoft Entra ID, you need to add Per Angusta from the gallery to your list of managed SaaS apps.
To configure the integration of UltiPro Perception into Microsoft Entra ID, you need to add UltiPro Perception from the gallery to your list of managed SaaS apps.
To configure the integration of Perceptyx into Microsoft Entra ID, you need to add Perceptyx from the gallery to your list of managed SaaS apps.
To configure the integration of Percolate into Microsoft Entra ID, you need to add Percolate from the gallery to your list of managed SaaS apps.
**To add PerformanceCentre from the gallery, perform the following steps:**
To configure the integration of Perimeter 81 into Microsoft Entra ID, you need to add Perimeter 81 from the gallery to your list of managed SaaS apps.
To configure the integration of PerimeterX into Microsoft Entra ID, you need to add PerimeterX from the gallery to your list of managed SaaS apps.
To configure the integration of Periscope Data into Microsoft Entra ID, you need to add Periscope Data from the gallery to your list of managed SaaS apps.
To configure the integration of PetroVue into Microsoft Entra ID, you need to add PetroVue from the gallery to your list of managed SaaS apps.
To configure the integration of Pexip Service (MMV legacy app) into Microsoft Entra ID, you need to add Pexip Service (MMV legacy app) from the gallery to your list of managed SaaS apps.
To configure the integration of Phenom TXM into Microsoft Entra ID, you need to add Phenom TXM from the gallery to your list of managed SaaS apps.
**To add Phraseanet from the gallery, perform the following steps:**
To configure the integration of Picturepark into Microsoft Entra ID, you need to add Picturepark from the gallery to your list of managed SaaS apps.
To configure the integration of Pingboard into Microsoft Entra ID, you need to add Pingboard from the gallery to your list of managed SaaS apps.
To configure the integration of Pipedrive into Microsoft Entra ID, you need to add Pipedrive from the gallery to your list of managed SaaS apps.
To configure the integration of PlanGrid into Microsoft Entra ID, you need to add PlanGrid from the gallery to your list of managed SaaS apps.
**To add PlanMyLeave from the gallery, perform the following steps:**
To configure the integration of Planview Admin into Microsoft Entra ID, you need to add Planview Admin from the gallery to your list of managed SaaS apps.
To configure the integration of Planview Enterprise One into Microsoft Entra ID, you need to add Planview Enterprise One from the gallery to your list of managed SaaS apps.
To configure the integration of Planview LeanKit into Microsoft Entra ID, you need to add Planview LeanKit from the gallery to your list of managed SaaS apps.
To configure the integration of Pleo into Microsoft Entra ID, you need to add Pleo from the gallery to your list of managed SaaS apps.
To configure the integration of Pluralsight into Microsoft Entra ID, you need to add Pluralsight from the gallery to your list of managed SaaS apps.
To configure the integration of Pluto into Microsoft Entra ID, you need to add Pluto from the gallery to your list of managed SaaS apps.
To configure the integration of Podbean into Microsoft Entra ID, you need to add Podbean from the gallery to your list of managed SaaS apps.
To configure the integration of PolicyStat into Microsoft Entra ID, you need to add PolicyStat from the gallery to your list of managed SaaS apps.
To configure the integration of PoliteMail - SSO into Microsoft Entra ID, you need to add PoliteMail - SSO from the gallery to your list of managed SaaS apps.
To configure the integration of PoolParty Semantic Suite into Microsoft Entra ID, you need to add PoolParty Semantic Suite from the gallery to your list of managed SaaS apps.
To configure the integration of PostBeyond into Microsoft Entra ID, you need to add PostBeyond from the gallery to your list of managed SaaS apps.
To configure the integration of Postman into Microsoft Entra ID, you need to add Postman from the gallery to your list of managed SaaS apps.
To configure the integration of Powerschool Performance Matters into Microsoft Entra ID, you need to add Powerschool Performance Matters from the gallery to your list of managed SaaS apps.
To configure the integration of Predictix Ordering into Microsoft Entra ID, you need to add Predictix Ordering from the gallery to your list of managed SaaS apps.
To configure the integration of Preset into Microsoft Entra ID, you need to add Preset from the gallery to your list of managed SaaS apps.
To configure the integration of PressPage into Microsoft Entra ID, you need to add PressPage from the gallery to your list of managed SaaS apps.
To configure the integration of PressReader into Microsoft Entra ID, you need to add PressReader from the gallery to your list of managed SaaS apps.
To configure the integration of PressWise into Microsoft Entra ID, you need to add PressWise from the gallery to your list of managed SaaS apps.
To configure the integration of Prezi into Microsoft Entra ID, you need to add Prezi from the gallery to your list of managed SaaS apps.
To configure the integration of Prisma Cloud SSO into Microsoft Entra ID, you need to add Prisma Cloud SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Procaire into Microsoft Entra ID, you need to add Procaire from the gallery to your list of managed SaaS apps.
To configure the integration of ProcessUnity into Microsoft Entra ID, you need to add ProcessUnity from the gallery to your list of managed SaaS apps.
To configure the integration of Procore SSO into Microsoft Entra ID, you need to add Procore SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Prodog into Microsoft Entra ID, you need to add Prodog from the gallery to your list of managed SaaS apps.
To configure the integration of ProdPad into Microsoft Entra ID, you need to add ProdPad from the gallery to your list of managed SaaS apps.
To configure the integration of productboard into Microsoft Entra ID, you need to add productboard from the gallery to your list of managed SaaS apps.
To configure the integration of Productive into Microsoft Entra ID, you need to add Productive from the gallery to your list of managed SaaS apps.
To configure the integration of ProductPlan into Microsoft Entra ID, you need to add ProductPlan from the gallery to your list of managed SaaS apps.
To configure the integration of ProjectPlace into Microsoft Entra ID, you need to add ProjectPlace from the gallery to your list of managed SaaS apps.
To configure the integration of Prolorus into Microsoft Entra ID, you need to add Prolorus from the gallery to your list of managed SaaS apps.
To configure the integration of Nintex Promapp into Microsoft Entra ID, you need to add Nintex Promapp from the gallery to your list of managed SaaS apps.
To configure the integration of ProNovos Analytics into Microsoft Entra ID, you need to add ProNovos Analytics from the gallery to your list of managed SaaS apps.
To configure the integration of ProNovos Ops Manager into Microsoft Entra ID, you need to add ProNovos Ops Manager from the gallery to your list of managed SaaS apps.
To configure the integration of Proofpoint on Demand into Microsoft Entra ID, you need to add Proofpoint on Demand from the gallery to your list of managed SaaS apps.
To configure the integration of ProProfs Training Maker into Microsoft Entra ID, you need to add ProProfs Training Maker from the gallery to your list of managed SaaS apps.
To configure the integration of ProProfs Knowledge Base into Microsoft Entra ID, you need to add ProProfs Knowledge Base from the gallery to your list of managed SaaS apps.
To configure the integration of Prosci Portal into Microsoft Entra ID, you need to add Prosci Portal from the gallery to your list of managed SaaS apps.
To configure the integration of Proto.io into Microsoft Entra ID, you need to add Proto.io from the gallery to your list of managed SaaS apps.
To configure the integration of Proware into Microsoft Entra ID, you need to add Proware from the gallery to your list of managed SaaS apps.
To configure the integration of Proxyclick into Microsoft Entra ID, you need to add Proxyclick from the gallery to your list of managed SaaS apps.
To configure the integration of Pulse Secure PCS into Microsoft Entra ID, you need to add Pulse Secure PCS from the gallery to your list of managed SaaS apps.
To configure the integration of Pulse Secure Virtual Traffic Manager into Microsoft Entra ID, you need to add Pulse Secure Virtual Traffic Manager from the gallery to your list of managed SaaS apps.
To configure the integration of Pure Storage SSO into Microsoft Entra ID, you need to add Pure Storage SSO from the gallery to your list of managed SaaS apps.
To configure integration of Genesys Cloud for Azure into Microsoft Entra ID, you must add Genesys Cloud for Azure from the gallery to your list of managed SaaS apps. To do this, follow these steps:
To configure the integration of PurelyHR into Microsoft Entra ID, you need to add PurelyHR from the gallery to your list of managed SaaS apps.
To configure the integration of PwC Identity into Microsoft Entra ID, you need to add PwC Identity from the gallery to your list of managed SaaS apps.
To configure the integration of pymetrics into Microsoft Entra ID, you need to add pymetrics from the gallery to your list of managed SaaS apps.
To configure the integration of Qiita Team into Microsoft Entra ID, you need to add Qiita Team from the gallery to your list of managed SaaS apps.
To configure the integration of Qlik Sense Enterprise into Microsoft Entra ID, you need to add Qlik Sense Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Qmarkets Idea & Innovation Management into Microsoft Entra ID, you need to add Qmarkets Idea & Innovation Management from the gallery to your list of managed SaaS apps.
To configure the integration of Qminder into Microsoft Entra ID, you need to add Qminder from the gallery to your list of managed SaaS apps.
To configure the integration of QPrism into Microsoft Entra ID, you need to add QPrism from the gallery to your list of managed SaaS apps.
To configure the integration of QReserve into Microsoft Entra ID, you need to add QReserve from the gallery to your list of managed SaaS apps.
To configure the integration of Qualaroo into Microsoft Entra ID, you need to add Qualaroo from the gallery to your list of managed SaaS apps.
To configure the integration of Qualtrics into Microsoft Entra ID, you need to add Qualtrics from the gallery to your list of managed SaaS apps.
To configure the integration of Quantum Workplace into Microsoft Entra ID, you need to add Quantum Workplace from the gallery to your list of managed SaaS apps.
To configure the integration of Quarem into Microsoft Entra ID, you need to add Quarem from the gallery to your list of managed SaaS apps.
To configure the integration of Questetra BPM Suite into Microsoft Entra ID, you need to add Questetra BPM Suite from the gallery to your list of managed SaaS apps.
To configure the integration of QuickHelp into Microsoft Entra ID, you need to add QuickHelp from the gallery to your list of managed SaaS apps.
To configure the integration of Qumu Cloud into Microsoft Entra ID, you need to add Qumu Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Rackspace SSO into Microsoft Entra ID, you need to add Rackspace SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Radancy's Employee Referrals into Microsoft Entra ID, you need to add Radancy's Employee Referrals from the gallery to your list of managed SaaS apps.
To configure the integration of Raketa into Microsoft Entra ID, you need to add Raketa from the gallery to your list of managed SaaS apps.
To configure the integration of Rally Software into Microsoft Entra ID, you need to add Rally Software from the gallery to your list of managed SaaS apps.
To configure the integration of raum]für[raum into Microsoft Entra ID, you need to add raum]für[raum from the gallery to your list of managed SaaS apps.
To configure the integration of Reach 360 into Microsoft Entra ID, you need to add Reach 360 from the gallery to your list of managed SaaS apps.
To configure the integration of ReadCube Papers into Microsoft Entra ID, you need to add ReadCube Papers from the gallery to your list of managed SaaS apps.
To configure the integration of Real Links into Microsoft Entra ID, you need to add Real Links from the gallery to your list of managed SaaS apps.
To configure the integration of Recognize into Microsoft Entra ID, you need to add Recognize from the gallery to your list of managed SaaS apps.
To configure the integration of RedBrick Health into Microsoft Entra ID, you need to add RedBrick Health from the gallery to your list of managed SaaS apps.
To configure the integration of RedVector into Microsoft Entra ID, you need to add RedVector from the gallery to your list of managed SaaS apps.
**To add Reflektive from the gallery, perform the following steps:**
To configure the integration of RemotePC into Microsoft Entra ID, you need to add RemotePC from the gallery to your list of managed SaaS apps.
To configure the integration of PHONE APPLI PEOPLE into Microsoft Entra ID, you need to add PHONE APPLI PEOPLE from the gallery to your list of managed SaaS apps.
To configure the integration of Replicon into Microsoft Entra ID, you need to add Replicon from the gallery to your list of managed SaaS apps.
To configure the integration of Reprints Desk - Article Galaxy into Microsoft Entra ID, you need to add Reprints Desk - Article Galaxy from the gallery to your list of managed SaaS apps.
To configure the integration of Rescana into Microsoft Entra ID, you need to add Rescana from the gallery to your list of managed SaaS apps.
To configure the integration of Retail Zipline into Microsoft Entra ID, you need to add Retail Zipline from the gallery to your list of managed SaaS apps.
To configure the integration of RetrieverMediaDatabase into Microsoft Entra ID, you need to add RetrieverMediaDatabase from the gallery to your list of managed SaaS apps.
To configure the integration of Reviewsnap into Microsoft Entra ID, you need to add Reviewsnap from the gallery to your list of managed SaaS apps.
To configure the integration of RevSpace into Microsoft Entra ID, you need to add RevSpace from the gallery to your list of managed SaaS apps.
To configure the integration of Reward Gateway into Microsoft Entra ID, you need to add Reward Gateway from the gallery to your list of managed SaaS apps.
To configure the integration of Rewatch into Microsoft Entra ID, you need to add Rewatch from the gallery to your list of managed SaaS apps.
To configure the integration of RFPIO into Microsoft Entra ID, you need to add RFPIO from the gallery to your list of managed SaaS apps.
To configure the integration of Rhombus Systems into Microsoft Entra ID, you need to add Rhombus Systems from the gallery to your list of managed SaaS apps.
To configure the integration of RightAnswers into Microsoft Entra ID, you need to add RightAnswers from the gallery to your list of managed SaaS apps.
To configure the integration of RightCrowd Workforce Management into Microsoft Entra ID, you need to add RightCrowd Workforce Management from the gallery to your list of managed SaaS apps.
To configure the integration of Rightscale into Microsoft Entra ID, you need to add Rightscale from the gallery to your list of managed SaaS apps.
To configure the integration of RingCentral into Microsoft Entra ID, you need to add RingCentral from the gallery to your list of managed SaaS apps.
To configure the integration of Rise.com into Microsoft Entra ID, you need to add Rise.com from the gallery to your list of managed SaaS apps.
To configure the integration of Riva into Microsoft Entra ID, you need to add Riva from the gallery to your list of managed SaaS apps.
To integrate Roadmunk into Microsoft Entra ID, from the gallery, add Roadmunk to your list of managed SaaS apps:
To configure the integration of Robin into Microsoft Entra ID, you need to add Robin from the gallery to your list of managed SaaS apps.
To configure the integration of RocketReach SSO into Microsoft Entra ID, you need to add RocketReach SSO from the gallery to your list of managed SaaS apps.
To configure the integration of RoleMapper into Microsoft Entra ID, you need to add RoleMapper from the gallery to your list of managed SaaS apps.
To configure the integration of RolePoint into Microsoft Entra ID, you need to add RolePoint from the gallery to your list of managed SaaS apps.
To configure the integration of Rollbar into Microsoft Entra ID, you need to add Rollbar from the gallery to your list of managed SaaS apps.
To configure the integration of Rootly into Microsoft Entra ID, you need to add Rootly from the gallery to your list of managed SaaS apps.
To configure the integration of RSA Archer Suite into Microsoft Entra ID, you need to add RSA Archer Suite from the gallery to your list of managed SaaS apps.
To configure the integration of RunMyProcess into Microsoft Entra ID, you need to add RunMyProcess from the gallery to your list of managed SaaS apps.
To configure the integration of S4 - Digitsec into Microsoft Entra ID, you need to add S4 - Digitsec from the gallery to your list of managed SaaS apps.
To configure the integration of Saba Cloud into Microsoft Entra ID, you need to add Saba Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of SafeConnect into Microsoft Entra ID, you need to add SafeConnect from the gallery to your list of managed SaaS apps.
To configure the integration of SafetyCulture into Microsoft Entra ID, you need to add SafetyCulture from the gallery to your list of managed SaaS apps.
To configure the integration of SafetyNet into Microsoft Entra ID, you need to add SafetyNet from the gallery to your list of managed SaaS apps.
To configure the integration of Sakon Device Platform into Microsoft Entra ID, you need to add Sakon Device Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Salesforce Sandbox into Microsoft Entra ID, you need to add Salesforce Sandbox from the gallery to your list of managed SaaS apps.
To configure the integration of Salesforce into Microsoft Entra ID, you need to add Salesforce from the gallery to your list of managed SaaS apps.
To configure the integration of SolarWinds into Microsoft Entra ID, you need to add SolarWinds from the gallery to your list of managed SaaS apps.
To configure the integration of Samsara into Microsoft Entra ID, you need to add Samsara from the gallery to your list of managed SaaS apps.
To configure the integration of Samsung Knox and Business Services into Microsoft Entra ID, you need to add Samsung Knox and Business Services from the gallery to your list of managed SaaS apps.
To configure the integration of Sansan into Microsoft Entra ID, you need to add Sansan from the gallery to your list of managed SaaS apps.
To configure the integration of SAP Cloud for Customer into Microsoft Entra ID, you need to add SAP Cloud for Customer from the gallery to your list of managed SaaS apps.
To configure the integration of SAP Fiori into Microsoft Entra ID, you need to add SAP Fiori from the gallery to your list of managed SaaS apps.
To configure the integration of SAP NetWeaver into Microsoft Entra ID, you need to add SAP NetWeaver from the gallery to your list of managed SaaS apps.
To configure the integration of SAP Analytics Cloud into Microsoft Entra ID, you need to add SAP Analytics Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of SAP Business ByDesign into Microsoft Entra ID, you need to add SAP Business ByDesign from the gallery to your list of managed SaaS apps.
To configure the integration of SAP HANA into Microsoft Entra ID, you need to add SAP HANA from the gallery to your list of managed SaaS apps.
To configure the integration of SAS Viya SSO into Microsoft Entra ID, you need to add SAS Viya SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Sauce Labs - Mobile and Web Testing into Microsoft Entra ID, you need to add Sauce Labs - Mobile and Web Testing from the gallery to your list of managed SaaS apps.
To configure the integration of Saviynt into Microsoft Entra ID, you need to add Saviynt from the gallery to your list of managed SaaS apps.
To configure the integration of ScaleX Enterprise into Microsoft Entra ID, you need to add ScaleX Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Schoox into Microsoft Entra ID, you need to add Schoox from the gallery to your list of managed SaaS apps.
To configure the integration of Sciforma into Microsoft Entra ID, you need to add Sciforma from the gallery to your list of managed SaaS apps.
To configure the integration of SciQuest Spend Director into Microsoft Entra ID, you need to add SciQuest Spend Director from the gallery to your list of managed SaaS apps.
To configure the integration of ScreenPal into Microsoft Entra ID, you need to add ScreenPal from the gallery to your list of managed SaaS apps.
To configure the integration of ScreenSteps into Microsoft Entra ID, you need to add ScreenSteps from the gallery to your list of managed SaaS apps.
To configure the integration of Scuba Analytics into Microsoft Entra ID, you need to add Scuba Analytics from the gallery to your list of managed SaaS apps.
To configure the integration of SD Elements into Microsoft Entra ID, you need to add SD Elements from the gallery to your list of managed SaaS apps.
To configure the integration of SDS & Chemical Information Management into Microsoft Entra ID, you need to add SDS & Chemical Information Management from the gallery to your list of managed SaaS apps.
To configure the integration of Second Nature AI into Microsoft Entra ID, you need to add Second Nature AI from the gallery to your list of managed SaaS apps.
To configure the integration of Secret Server (on-premises) into Microsoft Entra ID, you need to add Secret Server (on-premises) from the gallery to your list of managed SaaS apps.
To configure the integration of Sectigo Certificate Manager into Microsoft Entra ID, you need to add Sectigo Certificate Manager from the gallery to your list of managed SaaS apps.
To configure the integration of Seculio into Microsoft Entra ID, you need to add Seculio from the gallery to your list of managed SaaS apps.
To configure the integration of SECURE DELIVER into Microsoft Entra ID, you need to add SECURE DELIVER from the gallery to your list of managed SaaS apps.
To configure the integration of SecureW2 JoinNow Connector into Microsoft Entra ID, you need to add SecureW2 JoinNow Connector from the gallery to your list of managed SaaS apps.
To configure the integration of Sedgwick CMS into Microsoft Entra ID, you need to add Sedgwick CMS from the gallery to your list of managed SaaS apps.
To configure the integration of SeekOut into Microsoft Entra ID, you need to add SeekOut from the gallery to your list of managed SaaS apps.
To configure the integration of Segment into Microsoft Entra ID, you need to add Segment from the gallery to your list of managed SaaS apps.
To configure the integration of Seismic into Microsoft Entra ID, you need to add Seismic from the gallery to your list of managed SaaS apps.
To configure the integration of SendPro Enterprise into Microsoft Entra ID, you need to add SendPro Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of SendSafely into Microsoft Entra ID, you need to add SendSafely from the gallery to your list of managed SaaS apps.
To configure the integration of Senomix Timesheets into Microsoft Entra ID, you need to add Senomix Timesheets from the gallery to your list of managed SaaS apps.
To configure the integration of Sentry into Microsoft Entra ID, you need to add Sentry from the gallery to your list of managed SaaS apps.
To configure the integration of Genea Access Control into Microsoft Entra ID, you need to add Genea Access Control from the gallery to your list of managed SaaS apps.
To configure the integration of Serenity Connect into Microsoft Entra ID, you need to add Serenity Connect from the gallery to your list of managed SaaS apps.
To configure the integration of Serraview Space Utilization Software Solutions into Microsoft Entra ID, you need to add Serraview Space Utilization Software Solutions from the gallery to your list of managed SaaS apps.
To configure the integration of ServiceChannel into Microsoft Entra ID, you need to add ServiceChannel from the gallery to your list of managed SaaS apps.
To configure the integration of SoSafe into Microsoft Entra ID, you need to add SoSafe from the gallery to your list of managed SaaS apps.
To configure the integration of Settling music into Microsoft Entra ID, you need to add Settling music from the gallery to your list of managed SaaS apps.
To configure the integration of ShareCal into Microsoft Entra ID, you need to add ShareCal from the gallery to your list of managed SaaS apps.
To configure the integration of Citrix ShareFile into Microsoft Entra ID, you need to add Citrix ShareFile from the gallery to your list of managed SaaS apps.
To configure the integration of ShareVault into Microsoft Entra ID, you need to add ShareVault from the gallery to your list of managed SaaS apps.
To configure the integration of SharingCloud into Microsoft Entra ID, you need to add SharingCloud from the gallery to your list of managed SaaS apps.
**To add Shibumi from the gallery, perform the following steps:**
To configure the integration of Humanity into Microsoft Entra ID, you need to add Humanity from the gallery to your list of managed SaaS apps.
To configure the integration of ShipHazmat into Microsoft Entra ID, you need to add ShipHazmat from the gallery to your list of managed SaaS apps.
To configure the integration of Shmoop For Schools into Microsoft Entra ID, you need to add Shmoop For Schools from the gallery to your list of managed SaaS apps.
To configure the integration of Shopify Plus into Microsoft Entra ID, you need to add Shopify Plus from the gallery to your list of managed SaaS apps.
To configure the integration of Showpad into Microsoft Entra ID, you need to add Showpad from the gallery to your list of managed SaaS apps.
To configure the integration of Shuccho Navi into Microsoft Entra ID, you need to add Shuccho Navi from the gallery to your list of managed SaaS apps.
To configure the integration of Shutterstock into Microsoft Entra ID, you need to add Shutterstock from the gallery to your list of managed SaaS apps.
To configure the integration of SIFULAN Connect into Microsoft Entra ID, you need to add SIFULAN Connect from the gallery to your list of managed SaaS apps.
To configure the integration of Sigma Computing into Microsoft Entra ID, you need to add Sigma Computing from the gallery to your list of managed SaaS apps.
To configure the integration of Signagelive into Microsoft Entra ID, you need to add Signagelive from the gallery to your list of managed SaaS apps.
To configure the integration of Sigstr into Microsoft Entra ID, you need to add Sigstr from the gallery to your list of managed SaaS apps.
To configure the integration of SilkRoad Life Suite into Microsoft Entra ID, you need to add SilkRoad Life Suite from the gallery to your list of managed SaaS apps.
To configure the integration of Silverback into Microsoft Entra ID, you need to add Silverback from the gallery to your list of managed SaaS apps.
To configure the integration of Simple Sign into Microsoft Entra ID, you need to add Simple Sign from the gallery to your list of managed SaaS apps.
To configure the integration of SimpleNexus into Microsoft Entra ID, you need to add SimpleNexus from the gallery to your list of managed SaaS apps.
To configure the integration of SIS Enterprise into Microsoft Entra ID, you need to add SIS Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of SiteIntel into Microsoft Entra ID, you need to add SiteIntel from the gallery to your list of managed SaaS apps.
To configure the integration of Skedda into Microsoft Entra ID, you need to add Skedda from the gallery to your list of managed SaaS apps.
To configure the integration of Sketch into Microsoft Entra ID, you need to add Sketch from the gallery to your list of managed SaaS apps.
To configure the integration of Skilljar into Microsoft Entra ID, you need to add Skilljar from the gallery to your list of managed SaaS apps.
To configure the integration of Skillport into Microsoft Entra ID, you need to add Skillport from the gallery to your list of managed SaaS apps.
To configure the integration of Skills Workflow into Microsoft Entra ID, you need to add Skills Workflow from the gallery to your list of managed SaaS apps.
To configure the integration of Skills Base into Microsoft Entra ID, you need to add Skills Base from the gallery to your list of managed SaaS apps.
To configure the integration of Skills Manager into Microsoft Entra ID, you need to add Skills Manager from the gallery to your list of managed SaaS apps.
To configure the integration of Skopenow into Microsoft Entra ID, you need to add Skopenow from the gallery to your list of managed SaaS apps.
To configure the integration of Skybreathe® Analytics into Microsoft Entra ID, you need to add Skybreathe® Analytics from the gallery to your list of managed SaaS apps.
To configure the integration of SkyDesk Email into Microsoft Entra ID, you need to add SkyDesk Email from the gallery to your list of managed SaaS apps.
To configure the integration of MVISION Cloud Microsoft Entra SSO Configuration into Microsoft Entra ID, you need to add MVISION Cloud Microsoft Entra SSO Configuration from the gallery to your list of managed SaaS apps.
To configure the integration of SKYSITE into Microsoft Entra ID, you need to add SKYSITE from the gallery to your list of managed SaaS apps.
To configure the integration of Single Sign-on for Skytap into Microsoft Entra ID, you need to add Single Sign-on for Skytap from the gallery to your list of managed SaaS apps.
To configure the integration of Skyward Qmlativ into Microsoft Entra ID, you need to add Skyward Qmlativ from the gallery to your list of managed SaaS apps.
To configure the integration of Slack into Microsoft Entra ID, you need to add Slack from the gallery to your list of managed SaaS apps.
To configure the integration of Small Improvements into Microsoft Entra ID, you need to add Small Improvements from the gallery to your list of managed SaaS apps.
To configure the integration of Smart Map Pro into Microsoft Entra ID, you need to add Smart Map Pro from the gallery to your list of managed SaaS apps.
To configure the integration of Smart360 into Microsoft Entra ID, you need to add Smart360 from the gallery to your list of managed SaaS apps.
To configure the integration of SmartDraw into Microsoft Entra ID, you need to add SmartDraw from the gallery to your list of managed SaaS apps.
To configure the integration of SmarterU into Microsoft Entra ID, you need to add SmarterU from the gallery to your list of managed SaaS apps.
To configure the integration of SmartFile into Microsoft Entra ID, you need to add SmartFile from the gallery to your list of managed SaaS apps.
To configure the integration of SmartHR into Microsoft Entra ID, you need to add SmartHR from the gallery to your list of managed SaaS apps.
To configure the integration of SmartHub INFER into Microsoft Entra ID, you need to add SmartHub INFER from the gallery to your list of managed SaaS apps.
To configure the integration of SmartKargo into Microsoft Entra ID, you need to add SmartKargo from the gallery to your list of managed SaaS apps.
To configure the integration of Smartlook into Microsoft Entra ID, you need to add Smartlook from the gallery to your list of managed SaaS apps.
To configure the integration of SmartLPA into Microsoft Entra ID, you need to add SmartLPA from the gallery to your list of managed SaaS apps.
To configure the integration of Smartplan into Microsoft Entra ID, you need to add Smartplan from the gallery to your list of managed SaaS apps.
To configure the integration of SmartRecruiters into Microsoft Entra ID, you need to add SmartRecruiters from the gallery to your list of managed SaaS apps.
**To add smartvid.io from the gallery, perform the following steps:**
To configure the integration of Snackmagic into Microsoft Entra ID, you need to add Snackmagic from the gallery to your list of managed SaaS apps.
To configure the integration of Snowflake into Microsoft Entra ID, you need to add Snowflake from the gallery to your list of managed SaaS apps.
To configure the integration of Softeon WMS into Microsoft Entra ID, you need to add Softeon WMS from the gallery to your list of managed SaaS apps.
To configure the integration of Software AG Cloud into Microsoft Entra ID, you need to add Software AG Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of SolarWinds Orion into Microsoft Entra ID, you need to add SolarWinds Orion from the gallery to your list of managed SaaS apps.
To configure the integration of Soloinsight-CloudGate SSO into Microsoft Entra ID, you need to add Soloinsight-CloudGate SSO from the gallery to your list of managed SaaS apps.
To configure the integration of SonarQube into Microsoft Entra ID, you need to add SonarQube from the gallery to your list of managed SaaS apps.
To configure the integration of SpaceIQ into Microsoft Entra ID, you need to add SpaceIQ from the gallery to your list of managed SaaS apps.
**To add Spacio from the gallery, perform the following steps:**
To configure the integration of SpectrumU into Microsoft Entra ID, you need to add SpectrumU from the gallery to your list of managed SaaS apps.
To configure the integration of Speexx into Microsoft Entra ID, you need to add Speexx from the gallery to your list of managed SaaS apps.
To configure the integration of Spintr SSO into Microsoft Entra ID, you need to add Spintr SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Splan Visitor into Microsoft Entra ID, add Splan Visitor from the gallery to your list of managed SaaS apps.
To configure the integration of Splashtop Secure Workspace into Microsoft Entra ID, you need to add Splashtop Secure Workspace from the gallery to your list of managed SaaS apps.
To configure the integration of Splashtop into Microsoft Entra ID, you need to add Splashtop from the gallery to your list of managed SaaS apps.
To configure the integration of SpotDraft into Microsoft Entra ID, you need to add SpotDraft from the gallery to your list of managed SaaS apps.
To configure the integration of Spotinst into Microsoft Entra ID, you need to add Spotinst from the gallery to your list of managed SaaS apps.
To configure the integration of SpringCM into Microsoft Entra ID, you need to add SpringCM from the gallery to your list of managed SaaS apps.
To configure the integration of Springer Link into Microsoft Entra ID, you need to add Springer Link from the gallery to your list of managed SaaS apps.
To configure the integration of Sprinklr into Microsoft Entra ID, you need to add Sprinklr from the gallery to your list of managed SaaS apps.
To configure the integration of SPS|Production Manager into Microsoft Entra ID, you need to add SPS|Production Manager from the gallery to your list of managed SaaS apps.
To configure the integration of SquaREcruit into Microsoft Entra ID, you need to add SquaREcruit from the gallery to your list of managed SaaS apps.
To configure the integration of SSOGEN - Microsoft Entra SSO Gateway for Oracle E-Business Suite - EBS, PeopleSoft, and JDE into Microsoft Entra ID, you need to add SSOGEN - Microsoft Entra SSO Gateway for Oracle E-Business Suite - EBS, PeopleSoft, and JDE from the gallery to your list of managed SaaS apps.
To configure the integration of Stackby into Microsoft Entra ID, you need to add Stackby from the gallery to your list of managed SaaS apps.
To configure the integration of Stage and Screen into Microsoft Entra ID, you need to add Stage and Screen from the gallery to your list of managed SaaS apps.
To configure the integration of Starmind into Microsoft Entra ID, you need to add Starmind from the gallery to your list of managed SaaS apps.
To configure the integration of StatusPage into Microsoft Entra ID, you need to add StatusPage from the gallery to your list of managed SaaS apps.
To configure the integration of Stonebranch Universal Automation Center (SaaS Cloud) into Microsoft Entra ID, you need to add Stonebranch Universal Automation Center (SaaS Cloud) from the gallery to your list of managed SaaS apps.
To configure the integration of Stormboard into Microsoft Entra ID, you need to add Stormboard from the gallery to your list of managed SaaS apps.
To configure the integration of Striim Cloud into Microsoft Entra ID, you need to add Striim Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Striim Platform into Microsoft Entra ID, you need to add Striim Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Styleflow into Microsoft Entra ID, you need to add Styleflow from the gallery to your list of managed SaaS apps.
To configure the integration of SuccessFactors into Microsoft Entra ID, you need to add SuccessFactors from the gallery to your list of managed SaaS apps.
To configure the integration of Sugar CRM into Microsoft Entra ID, you need to add Sugar CRM from the gallery to your list of managed SaaS apps.
To configure the integration of SumTotalCentral into Microsoft Entra ID, you need to add SumTotalCentral from the gallery to your list of managed SaaS apps.
To configure the integration of Superluminal into Microsoft Entra ID, you need to add Superluminal from the gallery to your list of managed SaaS apps.
To configure the integration of Supermood into Microsoft Entra ID, you need to add Supermood from the gallery to your list of managed SaaS apps.
To configure the integration of Supply Chain Catalyst into Microsoft Entra ID, you need to add Supply Chain Catalyst from the gallery to your list of managed SaaS apps.
To configure the integration of SURFsecureID - Azure MFA into Microsoft Entra ID, you need to add SURFsecureID - Azure MFA from the gallery to your list of managed SaaS apps.
To configure the integration of SurveyMonkey Enterprise into Microsoft Entra ID, you need to add SurveyMonkey Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Swit into Microsoft Entra ID, you need to add Swit from the gallery to your list of managed SaaS apps.
To configure the integration of Symantec ZTNA into Microsoft Entra ID, you need to add Symantec ZTNA from the gallery to your list of managed SaaS apps.
To configure the integration of SynchroNet CLICK into Microsoft Entra ID, you need to add SynchroNet CLICK from the gallery to your list of managed SaaS apps.
To configure the integration of Syncplicity into Microsoft Entra ID, you need to add Syncplicity from the gallery to your list of managed SaaS apps.
To configure the integration of Syndio into Microsoft Entra ID, you need to add Syndio from the gallery to your list of managed SaaS apps.
To configure the integration of Synergi into Microsoft Entra ID, you need to add Synergi from the gallery to your list of managed SaaS apps.
To configure the integration of Synerise into Microsoft Entra ID, you need to add Synerise from the gallery to your list of managed SaaS apps.
To configure the integration of Syniverse Customer Portal into Microsoft Entra ID, you need to add Syniverse Customer Portal from the gallery to your list of managed SaaS apps.
To configure the integration of Syxsense into Microsoft Entra ID, you need to add Syxsense from the gallery to your list of managed SaaS apps.
To configure the integration of Tableau Cloud into Microsoft Entra ID, you need to add Tableau Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Tableau Server into Microsoft Entra ID, you need to add Tableau Server from the gallery to your list of managed SaaS apps.
To configure the integration of Talent Palette into Microsoft Entra ID, you need to add Talent Palette from the gallery to your list of managed SaaS apps.
To configure the integration of TalentLMS into Microsoft Entra ID, you need to add TalentLMS from the gallery to your list of managed SaaS apps.
To configure the integration of Talentsoft into Microsoft Entra ID, you need to add Talentsoft from the gallery to your list of managed SaaS apps.
To configure the integration of Tango Reserve by AgilQuest (EU Instance) into Microsoft Entra ID, you need to add Tango Reserve by AgilQuest (EU Instance) from the gallery to your list of managed SaaS apps.
To configure the integration of Tango Analytics into Microsoft Entra ID, you need to add Tango Analytics from the gallery to your list of managed SaaS apps.
To configure the integration of Tangoe Command Premium Mobile into Microsoft Entra ID, you need to add Tangoe Command Premium Mobile from the gallery to your list of managed SaaS apps.
To configure the integration of TargetProcess into Microsoft Entra ID, you need to add TargetProcess from the gallery to your list of managed SaaS apps.
To configure the integration of TAS into Microsoft Entra ID, you need to add TAS from the gallery to your list of managed SaaS apps.
To configure the integration of Taskize Connect into Microsoft Entra ID, you need to add Taskize Connect from the gallery to your list of managed SaaS apps.
To configure the integration of Teachme Biz into Microsoft Entra ID, you need to add Teachme Biz from the gallery to your list of managed SaaS apps.
To configure the integration of TeamAlert SSO into Microsoft Entra ID, you need to add TeamAlert SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Teamgo into Microsoft Entra ID, you need to add Teamgo from the gallery to your list of managed SaaS apps.
To configure the integration of Teamphoria into Microsoft Entra ID, you need to add Teamphoria from the gallery to your list of managed SaaS apps.
To configure the integration of TeamSeer into Microsoft Entra ID, you need to add TeamSeer from the gallery to your list of managed SaaS apps.
To configure the integration of TeamSlide into Microsoft Entra ID, you need to add TeamSlide from the gallery to your list of managed SaaS apps.
To configure the integration of TeamSticker by Communitio into Microsoft Entra ID, you need to add TeamSticker by Communitio from the gallery to your list of managed SaaS apps.
To configure the integration of TeamViewer into Microsoft Entra ID, you need to add TeamViewer from the gallery to your list of managed SaaS apps.
To configure the integration of Teamwork.com into Microsoft Entra ID, you need to add Teamwork.com from the gallery to your list of managed SaaS apps.
To configure the integration of TechSafe Entra ID SSO into Microsoft Entra ID, you need to add TechSafe Entra ID SSO from the gallery to your list of managed SaaS apps.
To find your directory ID:
To configure the integration of Tendium into Microsoft Entra ID, you need to add Tendium from the gallery to your list of managed SaaS apps.
To configure the integration of Terraform Cloud into Microsoft Entra ID, you need to add Terraform Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of Terraform Enterprise into Microsoft Entra ID, you need to add Terraform Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of TerraTrue into Microsoft Entra ID, you need to add TerraTrue from the gallery to your list of managed SaaS apps.
To configure the integration of TestingBot into Microsoft Entra ID, you need to add TestingBot from the gallery to your list of managed SaaS apps.
To configure the integration of TextExpander into Microsoft Entra ID, you need to add TextExpander from the gallery to your list of managed SaaS apps.
To configure the integration of Textline into Microsoft Entra ID, you need to add Textline from the gallery to your list of managed SaaS apps.
To configure the integration of TextMagic into Microsoft Entra ID, you need to add TextMagic from the gallery to your list of managed SaaS apps.
To configure the integration of TextUnited Translation into Microsoft Entra ID, you need to add TextUnited Translation from the gallery to your list of managed SaaS apps.
To configure the integration of The Funding Portal into Microsoft Entra ID, you need to add The Funding Portal from the gallery to your list of managed SaaS apps.
To configure the integration of The People Experience Hub into Microsoft Entra ID, you need to add The People Experience Hub from the gallery to your list of managed SaaS apps.
To configure the integration of ThirdLight into Microsoft Entra ID, you need to add ThirdLight from the gallery to your list of managed SaaS apps.
To configure the integration of ThirdPartyTrust into Microsoft Entra ID, you need to add ThirdPartyTrust from the gallery to your list of managed SaaS apps.
To configure the integration of Thomson Reuters Account into Microsoft Entra ID, you need to add Thomson Reuters Account from the gallery to your list of managed SaaS apps.
To configure the integration of Thoropass into Microsoft Entra ID, you need to add Thoropass from the gallery to your list of managed SaaS apps.
To configure the integration of Thoughtworks Mingle into Microsoft Entra ID, you need to add Thoughtworks Mingle from the gallery to your list of managed SaaS apps.
To configure the integration of ThousandEyes into Microsoft Entra ID, you need to add ThousandEyes from the gallery to your list of managed SaaS apps.
To configure the integration of Thrive LXP into Microsoft Entra ID, you need to add Thrive LXP from the gallery to your list of managed SaaS apps.
To configure the integration of TicketManager into Microsoft Entra ID, you need to add TicketManager from the gallery to your list of managed SaaS apps.
To configure the integration of TickitLMS Learn into Microsoft Entra ID, you need to add TickitLMS Learn from the gallery to your list of managed SaaS apps.
To configure the integration of Tidemark into Microsoft Entra ID, you need to add Tidemark from the gallery to your list of managed SaaS apps.
To configure the integration of TigerGraph into Microsoft Entra ID, you need to add TigerGraph from the gallery to your list of managed SaaS apps.
To configure the integration of TigerConnect Secure Messenger into Microsoft Entra ID, you need to add TigerConnect Secure Messenger from the gallery to your list of managed SaaS apps.
To configure the integration of TimeLive into Microsoft Entra ID, you need to add TimeLive from the gallery to your list of managed SaaS apps.
To configure the integration of TimeOffManager into Microsoft Entra ID, you need to add TimeOffManager from the gallery to your list of managed SaaS apps.
To configure the integration of Timetabling Solutions into Microsoft Entra ID, you need to add Timetabling Solutions from the gallery to your list of managed SaaS apps.
To configure the integration of TimeTrack into Microsoft Entra ID, you need to add TimeTrack from the gallery to your list of managed SaaS apps.
To configure the integration of TIMU into Microsoft Entra ID, you need to add TIMU from the gallery to your list of managed SaaS apps.
To configure the integration of Titanfile into Microsoft Entra ID, you need to add Titanfile from the gallery to your list of managed SaaS apps.
To configure the integration of TiViTz into Microsoft Entra ID, you need to add TiViTz from the gallery to your list of managed SaaS apps.
To configure the integration of TonicDM into Microsoft Entra ID, you need to add TonicDM from the gallery to your list of managed SaaS apps.
To configure the integration of Tonichi Nexta Meishi into Microsoft Entra ID, you need to add Tonichi Nexta Meishi from the gallery to your list of managed SaaS apps.
To configure the integration of TOPdesk - Public into Microsoft Entra ID, you need to add TOPdesk - Public from the gallery to your list of managed SaaS apps.
To configure the integration of TOPdesk - Secure into Microsoft Entra ID, you need to add TOPdesk - Secure from the gallery to your list of managed SaaS apps.
To configure the integration of Torii into Microsoft Entra ID, you need to add Torii from the gallery to your list of managed SaaS apps.
To configure the integration of TrackVia into Microsoft Entra ID, you need to add TrackVia from the gallery to your list of managed SaaS apps.
To configure the integration of Tradeshift into Microsoft Entra ID, you need to add Tradeshift from the gallery to your list of managed SaaS apps.
To configure the integration of Training Platform into Microsoft Entra ID, you need to add Training Platform from the gallery to your list of managed SaaS apps.
**To add Trakopolis from the gallery, perform the following steps:**
To configure the integration of Trakstar into Microsoft Entra ID, you need to add Trakstar from the gallery to your list of managed SaaS apps.
To configure the integration of TransPerfect GlobalLink Dashboard into Microsoft Entra ID, you need to add TransPerfect GlobalLink Dashboard from the gallery to your list of managed SaaS apps.
To configure the integration of TravelPerk into Microsoft Entra ID, you need to add TravelPerk from the gallery to your list of managed SaaS apps.
To configure the integration of Treasury Intelligence Solutions (TIS) into Microsoft Entra ID, you need to add Treasury Intelligence Solutions (TIS) from the gallery to your list of managed SaaS apps.
To configure the integration of Trelica into Microsoft Entra ID, you need to add Trelica from the gallery to your list of managed SaaS apps.
To configure the integration of TrendMiner into Microsoft Entra ID, you need to add TrendMiner from the gallery to your list of managed SaaS apps.
To configure the integration of Trevanna Tracks into Microsoft Entra ID, you need to add Trevanna Tracks from the gallery to your list of managed SaaS apps.
To configure the integration of Tribeloo into Microsoft Entra ID, you need to add Tribeloo from the gallery to your list of managed SaaS apps.
To configure the integration of Trint (US) into Microsoft Entra ID, you need to add Trint (US) from the gallery to your list of managed SaaS apps.
**To add Trisotech Digital Enterprise Server from the gallery, perform the following steps:**
To configure the integration of True Office Learning - LIO into Microsoft Entra ID, you need to add True Office Learning - LIO from the gallery to your list of managed SaaS apps.
To configure the integration of TrueChoice into Microsoft Entra ID, you need to add TrueChoice from the gallery to your list of managed SaaS apps.
To configure the integration of TruNarrative into Microsoft Entra ID, you need to add TruNarrative from the gallery to your list of managed SaaS apps.
To configure the integration of TrustWorks into Microsoft Entra ID, you need to add TrustWorks from the gallery to your list of managed SaaS apps.
Ensure that the Seamless SSO feature is still **Enabled** on your tenant. You can check the status by going to the **Entra ID** > **Entra Connect** > **Connect Sync** pane in the [[Microsoft Entra admin center](https://entra.microsoft.com)](https://portal.azure.com/).
To configure the integration of Tulip into Microsoft Entra ID, you need to add Tulip from the gallery to your list of managed SaaS apps.
To create the Hybrid Identity Administrator account:
To configure the integration of TutorOcean into Microsoft Entra ID, you need to add TutorOcean from the gallery to your list of managed SaaS apps.
To configure the integration of TVU Service into Microsoft Entra ID, you need to add TVU Service from the gallery to your list of managed SaaS apps.
To configure the integration of Twic into Microsoft Entra ID, you need to add Twic from the gallery to your list of managed SaaS apps.
To configure the integration of Twilio Sendgrid into Microsoft Entra ID, you need to add Twilio Sendgrid from the gallery to your list of managed SaaS apps.
**To add T&E Express from the gallery, perform the following steps:**
To configure the integration of UKG Pro into Microsoft Entra ID, you need to add UKG Pro from the gallery to your list of managed SaaS apps.
To configure the integration of Ungerboeck Software into Microsoft Entra ID, you need to add Ungerboeck Software from the gallery to your list of managed SaaS apps.
To configure the integration of UNIFI into Microsoft Entra ID, you need to add UNIFI from the gallery to your list of managed SaaS apps.
To configure the integration of uniFLOW Online into Microsoft Entra ID, you need to add uniFLOW Online from the gallery to your list of managed SaaS apps.
To configure the integration of Upshotly into Microsoft Entra ID, you need to add Upshotly from the gallery to your list of managed SaaS apps.
To configure the integration of Upwork Enterprise into Microsoft Entra ID, you need to add Upwork Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of U.S. Bank Prepaid into Microsoft Entra ID, you need to add U.S. Bank Prepaid from the gallery to your list of managed SaaS apps.
**To add Useall from the gallery, perform the following steps:**
To configure the integration of User Interviews into Microsoft Entra ID, you need to add User Interviews from the gallery to your list of managed SaaS apps.
To configure the integration of UserEcho into Microsoft Entra ID, you need to add UserEcho from the gallery to your list of managed SaaS apps.
To configure the integration of UserZoom into Microsoft Entra ID, you need to add UserZoom from the gallery to your list of managed SaaS apps.
To configure the integration of V-Client into Microsoft Entra ID, you need to add V-Client from the gallery to your list of managed SaaS apps.
To configure the integration of valid8Me into Microsoft Entra ID, you need to add valid8Me from the gallery to your list of managed SaaS apps.
To configure the integration of ValidSign into Microsoft Entra ID, you need to add ValidSign from the gallery to your list of managed SaaS apps.
To configure the integration of Vault Platform into Microsoft Entra ID, you need to add Vault Platform from the gallery to your list of managed SaaS apps.
To configure the integration of VeraSMART into Microsoft Entra ID, you need to add VeraSMART from the gallery to your list of managed SaaS apps.
To configure the integration of VergeSense into Microsoft Entra ID, you need to add VergeSense from the gallery to your list of managed SaaS apps.
To configure the integration of Verity into Microsoft Entra ID, you need to add Verity from the gallery to your list of managed SaaS apps.
To configure the integration of Verkada Command into Microsoft Entra ID, you need to add Verkada Command from the gallery to your list of managed SaaS apps.
To configure the integration of Verme into Microsoft Entra ID, you need to add Verme from the gallery to your list of managed SaaS apps.
To configure the integration of Versal into Microsoft Entra ID, you need to add Versal from the gallery to your list of managed SaaS apps.
To configure the integration of Veza into Microsoft Entra ID, you need to add Veza from the gallery to your list of managed SaaS apps.
To configure the integration of Vibe HCM into Microsoft Entra ID, you need to add Vibe HCM from the gallery to your list of managed SaaS apps.
To configure the integration of VIDA into Microsoft Entra ID, you need to add VIDA from the gallery to your list of managed SaaS apps.
**To add Vidyard from the gallery, perform the following steps:**
To configure the integration of Visibly into Microsoft Entra ID, you need to add Visibly from the gallery to your list of managed SaaS apps.
To configure the integration of Visitly into Microsoft Entra ID, you need to add Visitly from the gallery to your list of managed SaaS apps.
To configure the integration of Visit.org into Microsoft Entra ID, you need to add Visit.org from the gallery to your list of managed SaaS apps.
To configure the integration of Visma into Microsoft Entra ID, you need to add Visma from the gallery to your list of managed SaaS apps.
To configure the integration of Visual Paradigm Online into Microsoft Entra ID, you need to add Visual Paradigm Online from the gallery to your list of managed SaaS apps.
To configure the integration of VivoPoint into Microsoft Entra ID, you need to add VivoPoint from the gallery to your list of managed SaaS apps.
To configure the integration of VMware Horizon - Unified Access Gateway into Microsoft Entra ID, you need to add VMware Horizon - Unified Access Gateway from the gallery to your list of managed SaaS apps.
To configure the integration of Vocoli into Microsoft Entra ID, you need to add Vocoli from the gallery to your list of managed SaaS apps.
**To add Vodeclic from the gallery, perform the following steps:**
To configure the integration of vonage into Microsoft Entra ID, you need to add vonage from the gallery to your list of managed SaaS apps.
**To add Voyance from the gallery, perform the following steps:**
To configure the integration of vxMaintain into Microsoft Entra ID, you need to add vxMaintain from the gallery to your list of managed SaaS apps.
To configure the integration of Vyond into Microsoft Entra ID, you need to add Vyond from the gallery to your list of managed SaaS apps.
To configure the integration of WAN-Sign into Microsoft Entra ID, you need to add WAN-Sign from the gallery to your list of managed SaaS apps.
To configure the integration of Wandera RADAR Admin into Microsoft Entra ID, you need to add Wandera RADAR Admin from the gallery to your list of managed SaaS apps.
To configure the integration of Watch by Colors into Microsoft Entra ID, you need to add Watch by Colors from the gallery to your list of managed SaaS apps.
To configure the integration of Way We Do into Microsoft Entra ID, you need to add Way We Do from the gallery to your list of managed SaaS apps.
To configure the integration of Wdesk into Microsoft Entra ID, you need to add Wdesk from the gallery to your list of managed SaaS apps.
To configure the integration of Web Cargo Air into Microsoft Entra ID, you need to add Web Cargo Air from the gallery to your list of managed SaaS apps.
To configure the integration of Webcargo into Microsoft Entra ID, you need to add Webcargo from the gallery to your list of managed SaaS apps.
To configure the integration of webMethods Integration Suite into Microsoft Entra ID, you need to add webMethods Integration Suite from the gallery to your list of managed SaaS apps.
To configure the integration of WebXT Recognition into Microsoft Entra ID, you need to add WebXT Recognition from the gallery to your list of managed SaaS apps.
To configure the integration of WEDO into Microsoft Entra ID, you need to add WEDO from the gallery to your list of managed SaaS apps.
To configure the integration of Weekdone into Microsoft Entra ID, you need to add Weekdone from the gallery to your list of managed SaaS apps.
To configure the integration of Whatfix into Microsoft Entra ID, you need to add Whatfix from the gallery to your list of managed SaaS apps.
To configure the integration of Whimsical into Microsoft Entra ID, you need to add Whimsical from the gallery to your list of managed SaaS apps.
To configure the integration of WhosOnLocation into Microsoft Entra ID, you need to add WhosOnLocation from the gallery to your list of managed SaaS apps.
To configure the integration of WhosOffice into Microsoft Entra ID, you need to add WhosOffice from the gallery to your list of managed SaaS apps.
To configure the integration of Wikispaces into Microsoft Entra ID, you need to add Wikispaces from the gallery to your list of managed SaaS apps.
To configure the integration of Wingspan eTMF into Microsoft Entra ID, you need to add Wingspan eTMF from the gallery to your list of managed SaaS apps.
To configure the integration of WireWheel into Microsoft Entra ID, you need to add WireWheel from the gallery to your list of managed SaaS apps.
To configure the integration of Wisdom by Invictus into Microsoft Entra ID, you need to add Wisdom by Invictus from the gallery to your list of managed SaaS apps.
To configure the integration of Wiz SSO into Microsoft Entra ID, you need to add Wiz SSO from the gallery to your list of managed SaaS apps.
**To add Wizergos Productivity Software from the gallery, perform the following steps:**
To configure the integration of Wootric into Microsoft Entra ID, you need to add Wootric from the gallery to your list of managed SaaS apps.
To configure the integration of Workable into Microsoft Entra ID, you need to add Workable from the gallery to your list of managed SaaS apps.
To configure the integration of WorkBoard into Microsoft Entra ID, you need to add WorkBoard from the gallery to your list of managed SaaS apps.
To configure the integration of Workday into Microsoft Entra ID, you need to add Workday from the gallery to your list of managed SaaS apps.
To configure the integration of Workfront into Microsoft Entra ID, you need to add Workfront from the gallery to your list of managed SaaS apps.
To configure the integration of Workgrid into Microsoft Entra ID, you need to add Workgrid from the gallery to your list of managed SaaS apps.
To configure the integration of workhub into Microsoft Entra ID, you need to add workhub from the gallery to your list of managed SaaS apps.
To configure the integration of Workpath into Microsoft Entra ID, you need to add Workpath from the gallery to your list of managed SaaS apps.
To configure the integration of Workplace by Meta into Microsoft Entra ID, you need to add Workplace by Meta from the gallery to your list of managed SaaS apps.
To configure the integration of Workrite into Microsoft Entra ID, you need to add Workrite from the gallery to your list of managed SaaS apps.
To configure the integration of Workshop into Microsoft Entra ID, you need to add Workshop from the gallery to your list of managed SaaS apps.
To configure the integration of LINE WORKS into Microsoft Entra ID, you need to add LINE WORKS from the gallery to your list of managed SaaS apps.
To configure the integration of Workspot Control into Microsoft Entra ID, you need to add Workspot Control from the gallery to your list of managed SaaS apps.
**To add Workstars from the gallery, perform the following steps:**
To configure the integration of Workteam into Microsoft Entra ID, you need to add Workteam from the gallery to your list of managed SaaS apps.
To configure the integration of Workware into Microsoft Entra ID, you need to add Workware from the gallery to your list of managed SaaS apps.
To configure the integration of Wrike into Microsoft Entra ID, you need to add Wrike from the gallery to your list of managed SaaS apps.
To configure the integration of Wúru App into Microsoft Entra ID, you need to add Wúru App from the gallery to your list of managed SaaS apps.
To configure the integration of X-point Cloud into Microsoft Entra ID, you need to add X-point Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of XaitPorter into Microsoft Entra ID, you need to add XaitPorter from the gallery to your list of managed SaaS apps.
To configure the integration of xCarrier® into Microsoft Entra ID, you need to add xCarrier® from the gallery to your list of managed SaaS apps.
To configure the integration of XM Discover into Microsoft Entra ID, you need to add XM Discover from the gallery to your list of managed SaaS apps.
To configure the integration of XM Fax and XM SendSecure into Microsoft Entra ID, you need to add XM Fax and XM SendSecure from the gallery to your list of managed SaaS apps.
To configure the integration of xMatters OnDemand into Microsoft Entra ID, you need to add xMatters OnDemand from the gallery to your list of managed SaaS apps.
To configure the integration of Yardi eLearning into Microsoft Entra ID, you need to add Yardi eLearning from the gallery to your list of managed SaaS apps.
To configure the integration of YardiOne into Microsoft Entra ID, you need to add YardiOne from the gallery to your list of managed SaaS apps.
To configure the integration of Yello Enterprise into Microsoft Entra ID, you need to add Yello Enterprise from the gallery to your list of managed SaaS apps.
To configure the integration of Yodeck into Microsoft Entra ID, you need to add Yodeck from the gallery to your list of managed SaaS apps.
To configure the integration of Yokoy into Microsoft Entra ID, you need to add Yokoy from the gallery to your list of managed SaaS apps.
To configure the integration of Yonyx Interactive Guides into Microsoft Entra ID, you need to add Yonyx Interactive Guides from the gallery to your list of managed SaaS apps.
To configure the integration of YouEarnedIt into Microsoft Entra ID, you need to add YouEarnedIt from the gallery to your list of managed SaaS apps.
To configure the integration of Yuhu Property Management Platform into Microsoft Entra ID, you need to add Yuhu Property Management Platform from the gallery to your list of managed SaaS apps.
To configure the integration of ZDiscovery into Microsoft Entra ID, you need to add ZDiscovery from the gallery to your list of managed SaaS apps.
To configure the integration of Zendesk into Microsoft Entra ID, you need to add Zendesk from the gallery to your list of managed SaaS apps.
To configure the integration of Zengine into Microsoft Entra ID, you need to add Zengine from the gallery to your list of managed SaaS apps.
To configure the integration of ZenQMS into Microsoft Entra ID, you need to add ZenQMS from the gallery to your list of managed SaaS apps.
**To add ZephyrSSO from the gallery, perform the following steps:**
To configure the integration of zeroheight into Microsoft Entra ID, you need to add zeroheight from the gallery to your list of managed SaaS apps.
To configure the integration of Zest into Microsoft Entra ID, you need to add Zest from the gallery to your list of managed SaaS apps.
To configure the integration of Ziflow into Microsoft Entra ID, you need to add Ziflow from the gallery to your list of managed SaaS apps.
To configure the integration of Zip into Microsoft Entra ID, you need to add Zip from the gallery to your list of managed SaaS apps.
To configure the integration of Zivver into Microsoft Entra ID, you need to add Zivver from the gallery to your list of managed SaaS apps.
To configure the integration of Zoho One China into Microsoft Entra ID, you need to add Zoho One China from the gallery to your list of managed SaaS apps.
To configure the integration of Zoho One into Microsoft Entra ID, you need to add Zoho One from the gallery to your list of managed SaaS apps.
To configure the integration of Zola into Microsoft Entra ID, you need to add Zola from the gallery to your list of managed SaaS apps.
To configure the integration of Zonka Feedback into Microsoft Entra ID, you need to add Zonka Feedback from the gallery to your list of managed SaaS apps.
To configure the integration of Zoom for Government into Microsoft Entra ID, you need to add Zoom for Government from the gallery to your list of managed SaaS apps.
To configure the integration of Zscaler Beta into Microsoft Entra ID, you need to add Zscaler Beta from the gallery to your list of managed SaaS apps.
To configure the integration of Zuddl into Microsoft Entra ID, you need to add Zuddl from the gallery to your list of managed SaaS apps.
To configure the integration of Zwayam into Microsoft Entra ID, you need to add Zwayam from the gallery to your list of managed SaaS apps.
To configure the integration of Zylo into Microsoft Entra ID, you need to add Zylo from the gallery to your list of managed SaaS apps.
A Microsoft Entra documentation page was updated: 21795, 21796 are very similar content..
A Microsoft Entra documentation page was updated: 21795, 21796 are very similar content..
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
You can manage the [Microsoft Entra Joined Device Local Administrator](~/identity/role-based-access-control/permissions-reference.md#microsoft-entra-joined-device-local-administrator) role from **Device settings**.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
| Name | Source Attribute|
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
| ---------------| --------- |
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
* Fixed limitations to allow agent to be installed in non-English server
Complete the following steps to enable Microsoft Entra single sign-on.
Use the instructions in the following three sections to register Cloudflare with Microsoft Entra ID.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
To enable the admin consent workflow and choose reviewers:
Follow these steps to classify permissions using the Microsoft Entra admin center:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Hybrid Identity Administrator](~/identity/role-based-access-control/permissions-reference.md#hybrid-identity-administrator).
To verify that you have enabled Seamless SSO correctly:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Hybrid Identity Administrator](~/identity/role-based-access-control/permissions-reference.md#hybrid-identity-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
To configure the integration of Costpoint into Microsoft Entra ID, you need to add Costpoint from the gallery to your list of managed SaaS apps.
| **Reply URL** |
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
| Frequency Type | Time Limit (in hours) |
1. From the Azure portal menu, select **Microsoft Entra ID**.
1. From the Azure portal menu, select **Microsoft Entra ID**.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](/azure/active-directory/roles/permissions-reference#user-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
- A configured single sign-on (SSO) extension MDM payload with [PSSO settings in Intune](/mem/intune/configuration/platform-sso-macos) by an administrator
- A configured SSO extension MDM payload with PSSO settings in Intune by an administrator
The [Microsoft Entra admin center](https://entra.microsoft.com) allows you to control the deployment of Microsoft Entra joined devices in your organization. To configure the related settings, browse to **Entra ID** > **Devices** > **All devices** > **Device settings**. [Learn more](manage-device-identities.md)
Complete the following steps to enable Microsoft Entra single sign-on.
| **Sign on URL** |
Complete the following steps to enable Microsoft Entra single sign-on.
When your organization is created, the initial domain name, such as "contoso.onmicrosoft.com," is also the primary domain name. The primary domain is the default domain name for a new user when you create a new user. Setting a primary domain name streamlines the process for an administrator to create new users in the portal. To change the primary domain name:
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Global Administrator](../role-based-access-control/permissions-reference.md#global-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Groups Administrator](~/identity/role-based-access-control/permissions-reference.md#groups-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
To get started, sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Groups Administrator](~/identity/role-based-access-control/permissions-reference.md#groups-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Follow these steps to add links:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Key Path: **SOFTWARE\Microsoft\Windows\CurrentVersion\CDJ\AAD**.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Tenant Creator](~/identity/role-based-access-control/permissions-reference.md#tenant-creator).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Follow these steps to enable Microsoft Entra SSO.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Create a new terms of use document and save it as a PDF file.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
> [!TIP]
> 1. For **Supported account types**, select **Accounts in any organizational directory**.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
To review the admin consent requests and take action:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
**To configure SuccessFactors Writeback:**
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
First create and save the new certificate with a different expiration date:
You should select **Make this change for me** and then provide the values the quickstart asks for. When done, Microsoft Entra ID generates all the configuration files you need.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [User administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
**To configure Workday Writeback connector:**
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
| [Tool: Active Directory Federation Services Migration Readiness Script](https://aka.ms/migrateapps/adfstools) | This is a script you can run on your on-premises Active Directory Federation Services (AD FS) server to determine the readiness of apps for migration to Microsoft Entra ID.|
> | Configure notifications | [Contributor](/azure/role-based-access-control/built-in-roles#contributor) | [Owner](/azure/role-based-access-control/built-in-roles#owner) |
|Request header |Description |
| -------------- | -------------------- |
A Microsoft Entra documentation page was updated: 21885, 23183 are similar content..
> [!IMPORTANT]
If your federation partners can't consume your federation metadata, you must manually send them the public key of your new token-signing / token-decrypting certificate. Send your new certificate public key (.cer file or .p7b if you want to include the entire chain) to all your resource organization or account organization partners (represented in your AD FS by relying party trusts and claims provider trusts). Have the partners implement changes on their side to trust the new certificates.
|-----|-----|
author: cilwerner
2. The **View Variables** link in this location may also help root cause SSO issues, particularly if the BIG-IP APM fails to obtain the right attributes from Microsoft Entra ID or another source.
Learn more:
Now that the required packages are installed on the VM, join the VM to the managed domain.
> | Area | Content |
For more information about managing DNS, see the [DNS tools article on TechNet](/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc753579(v=ws.11)).
|Windows server 2016 or greater that is or has:|• 4-GB RAM or more</br>• .NET 4.6.2 runtime or greater</br>• domain-joined</br>• PowerShell execution policy set to **RemoteSigned**</br>• TLS 1.2 enabled</br>• if federation is being used, the AD FS severs must be Windows Server 2012 R2 or higher and TLS/SSL certificates must be configured.|
1. If you choose to create a virtual network, enter a name for the virtual network, such as *myVnet*, then provide an address range, such as *10.0.1.0/24*.
1. Select the **Workspace** at the top left corner.
1. In a different web browser window, sign in to your ArcGIS Online company site as an administrator

1. In a different web browser window, sign in to your Meraki Dashboard company site as an administrator
In the left browser, drill down to **config** > **authsettingsV2**.

1. In another browser window, sign on to your [Small Improvements](https://small-improvements.com) company site as an administrator.


In addition to using the Microsoft Entra join process, you can also manually elevate a regular user to become a local administrator on one specific device. This step requires you to already be a member of the local administrators group.
1. In a different web browser window, sign in to your Clebex company site as an administrator
1. Sign on to your Coupa company site as an administrator.
1. Sign in to your **Egnyte** company site as administrator.
1. In a web browser window, sign into your FM:Systems company site as an administrator.
2. Select **Workspace**.
1. In a different web browser window, sign in to your IntelligenceBank company site as an administrator.
1. Go to Setup.

1. In a different web browser window, sign into Leadfamly website as an administrator.
License consumption and utilization can still be viewed in the Microsoft 365 Admin Center under **Billing** > **Licenses**.
1. In a different web browser window, sign into Looker Analytics Platform website as an administrator.

1. In the **Role** tab, select **Storage Blob Data Contributor** role from the dropdown and then select **Next**.
1. In a different web browser window, sign in to your Panorama9 company site as an administrator.
1. In a different web browser window, sign in to Podbean as an Administrator.
1. Sign in to your Rally Software tenant.
1. In a web browser window, sign into your Replicon company site as an administrator.
1. In a different web browser window, sign in to your up Slack company site as an administrator

1. Sign in to your **TeamSeer** company site as an administrator.
1. In a different web browser window, sign into your TimeOffManager company site as an administrator.
1. Sign on to your **TOPdesk - Public** company site as administrator.
1. Sign on to your **TOPdesk - Secure** company site as administrator.
1. In a different browser window, sign on to your WhosOnLocation company site as administrator.
A Microsoft Entra documentation page was updated: Migrate Off Email Claim Authorization.
| `mobile` |Any string value or `null` | ```user.mobile -eq "value"```|
Microsoft Entra ID provides a rule builder to create and update your important rules more quickly. The rule builder supports the construction of up to five expressions.
Learn how to create a one-way outbound forest to an on-premises AD DS domain in the Microsoft Entra admin center for Microsoft Entra Domain Services
- Avoid the use of the `Match` operator in rules as much as possible. Instead, use the `StartsWith`, `Equals`, or `EndsWith` operator.
In this article, learn how to create and configure a Microsoft Entra Domain Services forest trust to an on-premises Active Directory Domain Services environment using Azure PowerShell.
This article discusses the most common methods that you can use to simplify your rules for dynamic membership groups. Rules that are simpler and more efficient result in better processing times for dynamic groups.
| **Custom OU structure** | **✓** | **✓** |
1. On the **Properties** page for the group, select a **Membership type** value of **Assigned (static)**, **Dynamic User**, or **Dynamic Device**, depending on your desired membership type. For dynamic membership groups, you can use the rule builder to select options for a simple rule or write a membership rule yourself.
:::image type="content" source="./media/groups-dynamic-rule-validation/validate-tab-view-details.png" alt-text="Screenshot that shows detailed results of rule validation.":::
A Microsoft Entra documentation page was updated: Howto Build Services Resilient To Metadata Refresh.
A Microsoft Entra documentation page was updated: V2 Howto Get Appsource Certified.
Learn how to test members against a rule for a dynamic membership groups in Microsoft Entra ID.
When the attributes of a user or a device change, the system evaluates all rules for dynamic membership groups in a directory to see if the change would trigger any group additions or removals. If users or devices satisfy a rule on a group, they're added as members of that group. If they no longer satisfy the rule, they're removed. You can't manually add or remove a member of a dynamic membership group.
Learn how to convert existing membership groups from static to dynamic by using either the Azure portal or PowerShell cmdlets.
Learn how to optimize your membership rules to automatically populate groups.
author: MicrosoftGuyJFlo
Learn how to manage rules for dynamic membership groups to automatically populate group members and rule references.
Learn how dynamic group management works.
Learn how to create or update rules for dynamic membership groups in the Azure portal and check their processing status.
| --- | --- |
Post the MSOnline retirement date, older versions of Microsoft Entra Connect can’t switch Staging mode via the wizard.
author: MicrosoftGuyJFlo
A Microsoft Entra documentation page was updated: 21885, 23183 are the same content..
A Microsoft Entra documentation page was updated: 21885, 23183 are the same content..
1. In the **Redirect URIs** textbox, use the URL associated with your LifeBalance Program subscription in this format. These usually have the following pattern:

```javascript
Learn how to register your app in Microsoft Entra ID and configure it for single-tenant or multitenant use.
author: cilwerner
manager: CelesteDG
author: OwenRichards1
author: OwenRichards1
author: OwenRichards1
author: kengaderdus
manager: mwongerapz
author: OwenRichards1
author: OwenRichards1
author: OwenRichards1
author: OwenRichards1
author: Dickson-Mwendia
author: henrymbuguakiarie
author: henrymbuguakiarie
author: henrymbuguakiarie
You want to add access to Microsoft Graph from your web app and perform some action as the signed-in user. This section describes how to grant delegated permissions to the web app and get the signed-in user's profile information from Microsoft Entra ID.
author: henrymbuguakiarie
author: OwenRichards1
author: OwenRichards1
author: henrymbuguakiarie
author: Dickson-Mwendia
author: Dickson-Mwendia
author: cilwerner
author: cilwerner
author: OwenRichards1
author: henrymbuguakiarie
zone_pivot_groups: entra-tenants
author: henrymbuguakiarie
author: cilwerner
In this tutorial, you:
author: Dickson-Mwendia
author: Dickson-Mwendia
author: Dickson-Mwendia
author: Dickson-Mwendia
>
A Microsoft Entra documentation page was updated: Web App Role Based Access Control.
Though the deadline has been extended, if you are not yet on a minimum supported version, you'll experience the following impacts after the original date:
|5. Enable [your configuration](#enable-your-configuration)|Once ready, enable the configuration and users/groups will begin synchronizing|
- [Provision groups to Active Directory using Microsoft Entra Cloud Sync](cloud-sync/how-to-configure-entra-to-active-directory.md)
|Attribute|Type|Supported for filtering|Required by InformaCast|
|Attribute|Type|Supported for filtering|Required by Infor CloudSuite|
|Attribute|Type|Supported for filtering|
1. Review the user attributes that are synchronized from Microsoft Entra ID to frankli in the **Attribute-Mapping** section. The attributes selected as **Matching** properties are used to match the user accounts in frankli for update operations. If you choose to change the [matching target attribute](~/identity/app-provisioning/customize-application-attributes.md), you need to ensure that the frankli API supports filtering users based on that attribute. Select the **Save** button to commit any changes.
|Attribute|Type|Supported For Filtering|
|Attribute|Type|Supported for filtering|Required by Gong|
9. Review the user attributes that are synchronized from Microsoft Entra ID to Hoxhunt in the **Attribute-Mapping** section. The attributes selected as **Matching** properties are used to match the user accounts in Hoxhunt for update operations. If you choose to change the [matching target attribute](~/identity/app-provisioning/customize-application-attributes.md), you need to ensure that the Hoxhunt API supports filtering users based on that attribute. Select the **Save** button to commit any changes.
|userName|String|✓|
|Attribute|Type|Supported for filtering|Required by Island|
|Attribute|Type|Supported for filtering|Required by Humbol|
|Attribute|Type|Supported For Filtering|
|Attribute|Type|Supported For Filtering|
|Attribute|Type|Supported For Filtering|
|Attribute|Type|Supported for filtering|Required by Funnel Leasing|

|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Howspace|
|Attribute|Type|Supported for filtering|Required by Ideagen Cloud|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Headspace|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported For Filtering|
|Attribute|Type|Supported for filtering|Required by GoSkills|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Hypervault|
|Attribute|Type|Supported for filtering|Required by Jellyfish|
|Attribute|Type|Supported for filtering|
|---|---|---|---|
|Attribute|Type|Supported for filtering|
|---|---|---|
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../role-based-access-control/permissions-reference.md#security-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
As part of this procedure, you're required to provide a user security token you need to request from Jive.com.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
After you disable Okta provisioning, the Microsoft Entra Connect cloud sync agent can synchronize objects.
In the [Microsoft Entra admin center](https://entra.microsoft.com), access the option to add custom security attributes from **Entra ID** > **Custom security attributes**. You need to have at least an **Attribute Definition Administrator** role to complete this task.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
|Attribute|Type|Supported for filtering|Required by Blinq|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Axiad Cloud|
|Attribute|Type|Supported for filtering|Required by ALVAO|
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|Required by BIS|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Asana|
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by BullseyeTDP|
| Attribute | Type | Supported For Filtering |
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Better Stack|
|Attribute|Type|Supported For Filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|Required by Cisco Webex|
|Attribute|Type|Supported for filtering|Required by Colloquial|
|Attribute|Type|Supported for filtering|Required by Dagster Cloud|
|Attribute|Type|Supported for filtering|Required by Egnyte|
For **Tenant URL** and **Authorization endpoint** values, use the following table.
|Attribute|Type|Supported for filtering|Required by Canva|
|Attribute|Type|Supported for filtering|Required by Cerby|
|Attribute|Type|Supported for filtering|Required by ClearView Trade|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by BIC Cloud Design|
|Attribute|Type|Supported for filtering|Required by Cybozu|
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|Required by elia|
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Contentstack|
|Attribute|Type|Supported for filtering|Required by CultureHQ|
|Attribute|Type|Supported for filtering|Required by embed signage|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|
If you've downloaded the provisioning agent and configured it for another on-premises application, then continue reading in the next section.
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Cleanmail|
|Attribute|Type|Supported for filtering|Required by Diffchecker|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Astro|
|Attribute|Type|Supported For Filtering|
|Attribute|Type|Supported for filtering|Required by Connecter|
|Attribute|Type|Supported for filtering|Required by Datadog|
|Attribute|Type|Supported for filtering|Required by Evercate|
To create two groups, follow these steps.
To configure the integration of Agile Provisioning into Microsoft Entra ID, you need to add Agile Provisioning from the gallery to your list of managed SaaS apps.
|Attribute|Type|Supported for filtering|Required by Ardoq|
|Attribute|Type|Supported for Filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|
|Attribute|Type|Supported for filtering|Required by Atmos|
**To add 4me from the Microsoft Entra application gallery, perform the following steps:**
::: zone pivot="app-provisioning"
**To add Airstack from the Microsoft Entra application gallery, perform the following steps:**
|Autosync timer (minutes)|120|
|Attribute|Type|Supported for filtering|
There are three ways to check whether an application is in quarantine:
After a provisioning cycle is complete, the **Statistics to date** section shows the cumulative numbers of users and groups that have been provisioned to date, along with the completion date and duration of the last cycle. The **Activity ID** uniquely identifies the most recent provisioning cycle. The **Job ID** is a unique identifier for the provisioning job, and is specific to the app in your tenant.
|Attribute|Type|Supported for filtering|Required by Autodesk SSO|
If you have already downloaded the provisioning agent and configured it for another on-premises application, then continue reading in the next section.
**To add BitaBIZ from the Microsoft Entra application gallery, perform the following steps:**
**To add Bonusly from the Microsoft Entra application gallery, perform the following steps:**
**To add Brivo Onair Identity Connector from the Microsoft Entra application gallery, perform the following steps:**
To get provisioning report information for a given application:
**To add Comeet Recruiting Software from the Microsoft Entra application gallery, perform the following steps:**
To add Cornerstone OnDemand from the Marketplace, follow these steps.
Follow these steps to access the **Mappings** feature of user provisioning:
::: zone pivot="app-provisioning"
**To add Dialpad from the Microsoft Entra application gallery, perform the following steps:**
**To add Dropbox for Business from the Microsoft Entra application gallery, perform the following steps:**
**To add Druva from the Microsoft Entra application gallery, perform the following steps:**
**To add Dynamic Signal from the Microsoft Entra application gallery, perform the following steps:**
To configure Elium for automatic user provisioning with Microsoft Entra ID, you must also add Elium from the Microsoft Entra application gallery to your list of managed software-as-a-service (SaaS) applications. Follow these steps:
**To add Federated Directory from the Microsoft Entra application gallery, perform the following steps:**
To configure Figma for automatic user provisioning with Microsoft Entra ID, you need to add Figma from the Microsoft Entra application gallery to your list of managed SaaS applications.
**To add Flock from the Microsoft Entra application gallery, perform the following steps:**
To add Foodee from the Microsoft Entra application gallery, do the following:
Before you configure Harness for automatic user provisioning with Microsoft Entra ID, you need to add Harness from the Microsoft Entra application gallery to your list of managed SaaS applications.
**To add Infor CloudSuite from the Microsoft Entra application gallery, perform the following steps:**
**To add iPass SmartConnect from the Microsoft Entra application gallery, perform the following steps:**
**To add Leapsome from the Microsoft Entra application gallery, perform the following steps:**
1. Login to **LogicGate** admin console.Navigate to the **Home** tab and Select **Profile** icon over top right corner.
To configure Looop for automatic user provisioning with Microsoft Entra ID, you need to add Looop from the Microsoft Entra application gallery to your list of managed SaaS applications.
**To add MerchLogix from the Microsoft Entra application gallery, perform the following steps:**
**To add MindTickle from the Microsoft Entra application gallery, perform the following steps:**
**To add Miro from the Microsoft Entra application gallery, perform the following steps:**
**To add myPolicies from the Microsoft Entra application gallery, perform the following steps:**
**To add OfficeSpace Software from the Microsoft Entra application gallery, perform the following steps:**
**To add Oracle Fusion ERP from the Microsoft Entra application gallery, perform the following steps:**
To configuring Peakon for automatic user provisioning with Microsoft Entra ID, you need to add Peakon from the Microsoft Entra application gallery to your list of managed SaaS applications.
To configure Priority Matrix for automatic user provisioning with Microsoft Entra ID, you need to add Priority Matrix from the Microsoft Entra application gallery to your list of managed SaaS applications.
**To add Promapp from the Microsoft Entra application gallery, perform the following steps:**
::: zone pivot="app-provisioning"
**To add Proxyclick from the Microsoft Entra application gallery, perform the following steps:**
**To add Reward Gateway from the Microsoft Entra application gallery, perform the following steps:**
**To add RFPIO from the Microsoft Entra application gallery, perform the following steps:**
**To add Robin from the Microsoft Entra application gallery, perform the following steps:**
**To configure SuccessFactors to Active Directory provisioning:**
To start managing provisioning to SchoolStream ASA in your Microsoft Entra ID, you need to add SchoolStream ASA from the Microsoft Entra application gallery.
**To add Signagelive from the Microsoft Entra application gallery, perform the following steps:**
**To add SmartFile from the Microsoft Entra application gallery, perform the following steps:**
**To add Soloinsight-CloudGate SSO from the Microsoft Entra application gallery, perform the following steps:**
**To add SpaceIQ from the Microsoft Entra application gallery, perform the following steps:**
**To add StarLeaf from the Microsoft Entra application gallery, perform the following steps:**
To configure Storegate for automatic user provisioning with Microsoft Entra ID, you need to add Storegate from the Microsoft Entra application gallery to your list of managed SaaS applications.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To configure TheOrgWiki for automatic user provisioning with Microsoft Entra ID, you need to add TheOrgWiki from the Microsoft Entra application gallery to your list of managed SaaS applications.
1. Log in to [Torii admin console](https://app.toriihq.com).
To create two groups, follow these steps.
To add Visitly from the Microsoft Entra application gallery, follow these steps.
**To add Workgrid from the Microsoft Entra application gallery, perform the following steps:**
This section guides you through the steps to configure the Microsoft Entra provisioning service to create, update, and disable users in Workplace from Meta App based on user assignments in Microsoft Entra ID.
**To add Workteam from the Microsoft Entra application gallery, perform the following steps:**
To add Wrike from the Microsoft Entra application gallery, follow these steps.
**To add Zscaler Beta from the Microsoft Entra application gallery, perform the following steps:**
To add Zscaler One from the Marketplace, follow these steps.
**To add Zscaler from the Microsoft Entra application gallery, perform the following steps:**
Before you configure Zscaler Three for automatic user provisioning with Microsoft Entra ID, you need to add Zscaler Three from the Microsoft Entra application gallery to your list of managed SaaS applications.
Before you configure Zscaler Two for automatic user provisioning with Microsoft Entra ID, you need to add Zscaler Two from the Microsoft Entra application gallery to your list of managed SaaS applications.
Before you configure Zscaler ZSCloud for automatic user provisioning with Microsoft Entra ID, you need to add Zscaler ZSCloud from the Microsoft Entra application gallery to your list of managed SaaS applications.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
If you have already downloaded the provisioning agent and configured it for another on-premises application, then continue reading in the next section.
|Delta Strategy|For IBM DB2, select `None` |
11. Review the user attributes that are synchronized from Microsoft Entra ID to Atea in the **Attribute-Mapping** section. The attributes selected as **Matching** properties are used to match the user accounts in Atea for update operations. If you choose to change the [matching target attribute](~/identity/app-provisioning/customize-application-attributes.md), you need to ensure that the Atea API supports filtering users based on that attribute. Select the **Save** button to commit any changes.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
The objective of this section is to outline how to enable provisioning of Active Directory user accounts to Box.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Use the Microsoft Entra admin center to view and manage all applications that are configured for single sign-on in a directory. Enterprise apps are apps that are deployed and used within your organization. Follow these steps to view and manage your enterprise applications:
The objective of this section is to outline how to enable user provisioning of Active Directory user accounts to DocuSign.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To export your configuration:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To access the logs in the Microsoft Entra admin center:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Log in to the [Microsoft Entra admin center](<https://entra.microsoft.com>) as at least an [Application Administrator](https://go.microsoft.com/fwlink/?linkid=2247823).
1. Log in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](https://go.microsoft.com/fwlink/?linkid=2247823).
1. Log in to [Microsoft Entra admin center](https://entra.microsoft.com) with at least [Application Administrator](https://go.microsoft.com/fwlink/?linkid=2247823) login credentials.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Save your access token to your clipboard or computer before leaving the page.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To configure automatic user provisioning for Playvox in Microsoft Entra ID:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
The objective of this section is to outline how to enable user provisioning of Active Directory user accounts to Salesforce.
The objective of this section is to outline how to enable user provisioning of Active Directory user accounts to Salesforce Sandbox.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
**To configure SuccessFactors to Microsoft Entra provisioning:**
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To configure automatic user provisioning for ServiceNow in Microsoft Entra ID:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To configure automatic user provisioning for Snowflake in Microsoft Entra ID:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
You'll now verify that the users that you had in our on-premises directory have been synchronized and now exist in our Microsoft Entra tenant. This process may take a few hours to complete. To verify users are synchronized, do the following:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Use the steps below to autodiscover these attributes and set up a corresponding mapping to Microsoft Entra ID.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To retrieve these data sets:
To retrieve pronouns from Workday, update your Microsoft Entra provisioning app to query Workday using v38.1 of the Workday Web Services. We recommend testing this configuration first in your test/sandbox environment before implementing the change in production.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
| Parameter | Description | Processing remarks |
- Use PowerShell to format the JSON. This script produces a JSON output in a format that includes tabs and spaces:
|Autosync timer (minutes)|120|
* Workday to Microsoft Entra user provisioning
|Requirement|Recommendation|
This section covers different write-back scenarios. It recommends configuration approaches based on how email and phone number is set up in SuccessFactors.
> Saving a new scoping filter triggers a new full sync for the application, where all users in the source system are evaluated again against the new scoping filter. If a user in the application was previously in scope for provisioning, but falls out of scope, their account is disabled or deprovisioned in the application. To override this default behavior, refer to [Skip deletion for user accounts that go out of scope](~/identity/app-provisioning/skip-out-of-scope-deletions.md).
| Resources| Link and Description |
1. Log in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](https://go.microsoft.com/fwlink/?linkid=2247823).
1. Sign in to [Eletive](https://app.eletive.com/). Navigate to **Settings** > **Features**.
1. Log in to [Microsoft Entra admin center](https://entra.microsoft.com) with at least [Application Administrator](https://go.microsoft.com/fwlink/?linkid=2247823) login credentials.
1. Access the GitHub repository [`entra-id-inbound-provisioning`](https://github.com/AzureAD/entra-id-inbound-provisioning).
1. In the **Provisioning** tab, set the **Provisioning Status** to **On**.
1. Log in to [BrowserStack](https://www.browserstack.com/users/sign_in) as a user with **Owner** permissions.
1. Log in to Clebex HUB.
1. Log in to your [H5mag environment](https://account.h5mag.com/login) and navigate to **[Account](https://account.h5mag.com/account)** > **[Provisioning & SSO](https://account.h5mag.com/account/provisioning)**.
1. Sign in to the Proware application by navigating to `https://www.metaware.nl/Proware`.
To retrieve more attributes, follow the steps listed:
1. In the **Provisioning** tab, set the **Provisioning Status** to **On**.
Learn how to provision custom security attributes from HR sources.
You can use the cloud sync feature of Microsoft Entra Connect to test configuration changes by applying these changes to a single user. This on-demand provisioning helps you validate and verify that the changes made to the configuration were applied properly and are being correctly synchronized to Microsoft Entra ID.
include file
Include file
This article describes the *BypassDirSyncOverridesEnabled* feature and how to restore synchronization of _mobile_ and _otherMobile_ attributes from Microsoft Entra ID to on-premises Active Directory.
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
zone_pivot_groups: app-provisioning-cross-tenant-synchronization
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
Migrating application authentication from AD FS to Microsoft Entra ID in four stages. Plan your move, test configurations, and secure apps.
author: msmimart
| `acrs` | JSON array of strings | Indicates the Auth Context IDs of the operations that the bearer is eligible to perform. Auth Context IDs can be used to trigger a demand for step-up authentication from within your application and services. Often used along with the `xms_cc` claim. |
> [!NOTE]
The **Authentication Details** tab provides the following information, for each authentication attempt:
|2519|Reinitialize Entra ID Connector account password| Shows that the AD Sync service account password was reset|
|Attribute|Type|Supported for filtering|Required by Forcepoint Cloud Security Gateway - User Authentication|
Use the following steps to verify that MFA is set up for your users, or to enable it if needed.
To configure the integration of Forcepoint Cloud Security Gateway - User Authentication into Microsoft Entra ID, you need to add Forcepoint Cloud Security Gateway - User Authentication from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](~/identity/role-based-access-control/permissions-reference.md#conditional-access-administrator).
To provide more security for sign-ins, you can enable multifactor authentication in the Microsoft Entra admin center:
To provide more sign-in security, you can enforce Microsoft Entra multifactor authentication. The process starts in the Microsoft Entra admin center.
To access the Audit logs in the Microsoft Entra admin center to view details of MFA Server to Microsoft Entra multifactor authentication user migrations, follow these steps:
It's recommended to enable this registration policy for users that use multifactor authentication. To enable this policy, complete the following steps:
After you enable password hash sync and seamless SSO on the Microsoft Entra Connect server, configure a staged rollout:
Follow these steps to check where your Authentication Agents are installed:
1. Review the sign-in logs.
**To add SAP Cloud Identity Services from the Microsoft Entra application gallery using the Microsoft Entra admin center, perform the following steps:**
1. Create a PKI container object.
To configure TAP in the Authentication methods policy:
To create the Hybrid Identity Administrator account:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Authentication Policy Administrator](~/identity/role-based-access-control/permissions-reference.md#authentication-policy-administrator).
You can use the [Microsoft Entra admin center](https://entra.microsoft.com). Using this option:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Authentication Policy Administrator](~/identity/role-based-access-control/permissions-reference.md#authentication-policy-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Authentication Policy Administrator](~/identity/role-based-access-control/permissions-reference.md#authentication-policy-administrator).
**To add Netskope User Authentication from the Microsoft Entra application gallery, perform the following steps:**
To configure the integration of Netskope User Authentication into Microsoft Entra ID, you need to add Netskope User Authentication from the gallery to your list of managed SaaS apps.
To configure the integration of Palo Alto Networks Cloud Identity Engine - Cloud Authentication Service into Microsoft Entra ID, you need to add Palo Alto Networks Cloud Identity Engine - Cloud Authentication Service from the gallery to your list of managed SaaS apps.
To configure the integration of Perforce Helix Core - Helix Authentication Service into Microsoft Entra ID, you need to add Perforce Helix Core - Helix Authentication Service from the gallery to your list of managed SaaS apps.
For organizations that have no established use of device code flow, blocking can be done with the following Conditional Access policy:
The following steps help create a Conditional Access policy to block legacy authentication requests. This policy is put in to [Report-only mode](howto-conditional-access-insights-reporting.md) to start so administrators can determine the impact they have on existing users. When administrators are comfortable that the policy applies as they intend, they can switch to **On** or stage the deployment by adding specific groups and excluding others.
It isn't possible to conduct a dry run using the Backup Authentication Service or simulate the result of a policy with resilience defaults enabled or disabled at this time. Microsoft Entra conducts monthly exercises using the Backup Authentication Service. The sign-in logs display if the Backup Authentication Service was used to issue the access token. In **Entra ID** > **Monitoring & health** > **Sign-in Logs** blade, you can add the filter "Token issuer type == Microsoft Entra Backup Auth" to display the logs processed by Microsoft Entra Backup Authentication service.
To configure the integration of SAP Cloud Identity Services into Microsoft Entra ID, you need to add SAP Cloud Identity Services from the gallery to your list of managed SaaS apps.
The activity details of sign-in logs contain several tabs. The **Conditional Access** tab lists the Conditional Access policies applied to that sign-in event.
Before you create an EAM in the admin center, make sure you have the [metadata to configure an EAM](#required-metadata-to-configure-an-eam).
You can find the authentication endpoints for your application.
To view the sign-in logs from the Microsoft Entra admin center:
To add, modify, or remove a CA, use the Microsoft Entra admin center:
See, [Tutorial: Secure user sign-in events with Microsoft Entra multifactor authentication](~/identity/authentication/tutorial-enable-azure-mfa.md).
Learn more: [Tutorial: Secure user sign-in events with Microsoft Entra multifactor authentication](~/identity/authentication/tutorial-enable-azure-mfa.md)
To access authentication method Usage and insights:
To enable the authentication method for passwordless phone sign-in, follow these steps:
First, let's enable SMS-based authentication for your Microsoft Entra tenant.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Hybrid Identity Administrator](../role-based-access-control/permissions-reference.md#hybrid-identity-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Authentication Administrator](~/identity/role-based-access-control/permissions-reference.md#authentication-administrator).
If the Azure Linux VM Sign-In application is missing from Conditional Access, make sure the application isn't in the tenant:
The following steps help create a Conditional Access policy to require multifactor authentication, devices accessing resources be marked as compliant with your organization's Intune compliance policies, or be Microsoft Entra hybrid joined.
The following steps help create a Conditional Access policy to require multifactor authentication, devices accessing resources be marked as compliant with your organization's Intune compliance policies, or be Microsoft Entra hybrid joined.
The following steps help create a Conditional Access policy to require those assigned administrative roles to perform multifactor authentication. Some organizations might be ready to move to stronger authentication methods for their administrators. These organizations might choose to implement a policy like the one described in the article [Require phishing-resistant multifactor authentication for administrators](policy-admin-phish-resistant-mfa.md).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Authentication Policy Administrator](../../identity/role-based-access-control/permissions-reference.md#authentication-policy-administrator).
First, create a Conditional Access policy and assign your test group of users as follows:
when (resetPasswordResult) {
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) using the appropriate combination of roles.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) using the appropriate combination of roles.
To check if a user’s account is present, follow these steps:
To configure account lockout settings, complete these steps:
To check if a user’s account is present, follow these steps:
As part of the configuration of the NPS extension, you must supply administrator credentials and the ID of your Microsoft Entra tenant. To get the tenant ID, complete the following steps:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To enable Windows LAPS with Microsoft Entra ID, you must take actions in Microsoft Entra ID and the devices you wish to manage. We recommend organizations [manage Windows LAPS using Microsoft Intune](/mem/intune/protect/windows-laps-policy). If your devices are Microsoft Entra joined but not using or don't support Microsoft Intune, you can deploy Windows LAPS for Microsoft Entra ID manually. For more information, see the article [Configure Windows LAPS policy settings](/windows-server/identity/laps/laps-management-policy-settings).
Create some test users in your tenant for testing. Since the test users are not actual humans, we recommend you assign complex passwords and securely store these passwords as [secrets](/azure/key-vault/secrets/about-secrets) in Azure Key Vault.
To verify and enable password writeback in SSPR, complete the following steps:
To enable password writeback in SSPR, complete the following steps:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
Microsoft Entra ID also supports direct single sign-on links to individual applications that support password-based single sign-on, linked single sign-on, and any form of federated single sign-on.
The per-user MFA administration experience in the Microsoft Entra admin center is recently improved. To view and manage user states, complete the following steps:
>
- `curl https://pas.windows.net/ -D -`
**To add Keeper Password Manager & Digital Vault from the Microsoft Entra application gallery, perform the following steps:**
To configure the integration of Keeper Password Manager into Microsoft Entra ID, add the application from the gallery to your list of managed software as a service (SaaS) apps.
To enable hardware OATH tokens in the Microsoft Entra admin center:
To register your application and add the app's registration information to your solution, follow these steps:
To enable the custom banned password list and add entries to it, complete the following steps:
In this tutorial, set up SSPR for a set of users in a test group. Use the *SSPR-Test-Group* and provide your own Microsoft Entra group as needed:
To configure the integration of UserVoice into Microsoft Entra ID, you need to add UserVoice from the gallery to your list of managed SaaS apps.
To ensure the permissions granted for the application are up-to-date, you can compare the permissions that are being requested by the application with the permissions already granted in the tenant.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [hybrid identity administrator](~/identity/role-based-access-control/permissions-reference.md#hybrid-identity-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Global Administrator](~/identity/role-based-access-control/permissions-reference.md#global-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Once you integrate your Microsoft Entra sign-in and audit logs with Azure Monitor as specified in the Azure Monitor integration, access the sign-ins workbook:
As part of the configuration of the NPS extension, you must supply administrator credentials and the ID of your Microsoft Entra tenant. To get the tenant ID, complete the following steps:
As part of the configuration of the NPS extension, you must supply administrator credentials and the ID of your Microsoft Entra tenant. To get the tenant ID, complete the following steps:
To view the sign-in activity report in the [Microsoft Entra admin center](https://entra.microsoft.com), complete the following steps. You can also query data using the [reporting API](~/identity/monitoring-health/howto-configure-prerequisites-for-reporting-api.md).
To check or modify the smart lockout values for your organization, complete the following steps:
Complete the following steps to create a policy that applies to all selected users that attempt to register using the combined registration experience, and requires users connected on a non-trusted network to either perform MFA or sign in using a Temporary Access Pass (TAP) to register for MFA or reset their password using SSPR:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Global Administrator](~/identity/role-based-access-control/permissions-reference.md#global-administrator).
Use the following the steps to find the password reset and password reset registration events:
To enable SSPR on the Windows sign-in screen by using a registry key, follow these steps:
To use *password writeback* and enable the self-service password reset (SSPR) service to detect the cloud sync agent, using the portal, complete the following steps:
To enable the application name or geographic location in the Microsoft Entra admin center, follow these steps:
To disable Authenticator Lite in the Microsoft Entra admin center, follow these steps:
To enable a registration campaign in the Microsoft Entra admin center, complete the following steps:
> [!NOTE]
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](~/identity/role-based-access-control/permissions-reference.md#reports-reader).
zone_pivot_groups: entra-tenants
1. Sign into the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
1. Sign into the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
- See, [Easy authentication and authorization in Microsoft Entra ID with no-code Datawiza](https://www.microsoft.com/security/blog/2022/05/17/easy-authentication-and-authorization-in-azure-active-directory-with-no-code-datawiza/)
* Optionally clean up logs and data directories that are left behind after backing them up first.
Users need to [download Teams](https://aka.ms/teamsmobiledownload). The following table lists the minimum Teams version for mobile operating systems. For more information about Teams versions, see [Version update history for the new and classic Microsoft Teams app](/officeupdates/teams-app-versioning).
The extension needs an HTTP connection to install packages and check for the existence of a system identity. It runs in the context of `walinuxagent.service` and requires a change to let the agent know about the proxy settings. Open `/lib/systemd/system/walinuxagent.service` file on the target machine and add the following line after `[Service]`:
|--------------|--------|---------|
| Name | Type | Default value | Description |
Specify your own custom passwords to ban, as shown in the following example
* **Write lockoutTime**
Organizations can also integrate NPS with Microsoft Entra multifactor authentication to enhance security and provide a high level of compliance. This helps ensure that users establish two-step verification to sign in to the Remote Desktop Gateway. For users to be granted access, they must provide their username/password combination along with information that the user has in their control. This information must be trusted and not easily duplicated, such as a cell phone number, landline number, application on a mobile device, and so on. RDG currently supports phone call and **Approve**/**Deny** push notifications from Microsoft authenticator app methods for 2FA. For more information about supported authentication methods, see the section [Determine which authentication methods your users can use](howto-mfa-nps-extension.md#determine-which-authentication-methods-your-users-can-use).
The **Conditional Access** tab of the event details shows you which policy triggered the MFA prompt.
1. Browse to **Identity** > **Settings**.
:::image type="content" border="true" source="media/how-to-register-passkey-with-security-key/inline-registration.png" alt-text="Screenshot of the Add a passkey (FIDO2) option for a more secure sign-in in My Security info.":::
To protect against token theft and replay attacks, explore the types of tokens used in Microsoft Entra and their role in authentication.
2. [Bring Your Own Certificate (BYOC)](#bring-your-own-certificate-byoc)
Self-service password reset (SSPR) gives users in Microsoft Entra ID the ability to change or reset their password, with no administrator or helpdesk involvement. If a user's account is locked or they forget their password, they can follow prompts to unblock themselves and get back to work. This ability reduces helpdesk calls and loss of productivity when a user can't sign in to their device or an application.
By using self-service password reset (SSPR) in Microsoft Entra ID, users can change or reset their password with no administrator or helpdesk involvement. Typically, users open a web browser on another device to access the [SSPR portal](https://aka.ms/sspr). To improve the experience on computers that run Windows 7, 8, 8.1, 10, and 11, you can enable users to reset their password on the Windows sign-in screen.
A script to postpone enforcement for a tenant where users are unable to sign in after rollout of mandatory MFA requirement for the Azure portal, Microsoft Entra admin center, or Microsoft Intune admin center
Steps to verify mandatory multifactor authentication for users who sign in to Azure and other management portals.
The script takes the following actions:
To use Microsoft Entra self-service password reset (SSPR), authentication information for a user must be present. Most organizations have users register their authentication data themselves while collecting information for multifactor authentication.

The graphics that you choose appear in the following circumstances:
author: justinha
Learn how to enable Microsoft Entra self-service password reset on the Windows sign-in screen.
Learn how to customize user display and experience options for Microsoft Entra self-service password reset.
Learn how to prepopulate contact information for users of Microsoft Entra self-service password reset (SSPR) so that they can use the feature without completing a registration process.
author: justinha
The following table shows what features associated with identity governance are available with each license. For more information on other features, see [Microsoft Entra plans and pricing](https://www.microsoft.com/security/business/microsoft-entra-pricing). Not all features are available in all clouds; see [Microsoft Entra feature availability](~/identity/authentication/feature-availability.md) for Azure Government.
Refresh tokens will automatically expire once the lifetime period elapses. Additionally, they can be revoked by the sign-in service at any time before their expiration. Your app should handle such revocations gracefully by redirecting the user to an interactive sign-in prompt to reauthenticate and obtain a new token.
> - It is recommended to use the TPM to provide a hardware-based security boundary, as opposed to the Local Machine store. To check the status of your TPM use the [Get-TPM](/powershell/module/trustedplatformmodule/get-tpm?view=windowsserver2025-ps) PowerShell cmdlet. If using Hyper-V VMs, the TPM can be enabled by checking Security > Enable Trusted Platform Module. This can only be done on a generation 2 virtual machines. Generation 1 virtual machines can't be converted to a generation 2 virtual machines. For more information see [Generation 2 virtual machine security settings for Hyper-V](/windows-server/virtualization/hyper-v/learn-more/generation-2-virtual-machine-security-settings-for-hyper-v) and [Enable Trusted launch on existing Azure Gen2 VMs](/azure/virtual-machines/trusted-launch-existing-vm)
Learn how to configure a sample React single-page app (SPA) that uses native authentication API to sign up users.
manager: CelesteDG
Prepare an Angular single-page app (SPA) in a Microsoft Entra tenant to manage authentication and secure user access.
Sign in user in an Angular single-page app (SPA) in a Microsoft Entra tenant to manage authentication and secure user access.
Learn how to acquire multiple access tokens and call an API in iOS/macOS app by using native authentication.
ai-usage: ai-assisted
A Microsoft Entra documentation page was updated: Quickstart Native Authentication Android Call Api.
A Microsoft Entra documentation page was updated: Quickstart Native Authentication Android Sign In.
A Microsoft Entra documentation page was updated: Quickstart Native Authentication Ios Call Api.
A Microsoft Entra documentation page was updated: Quickstart Native Authentication Ios Sign In.
A Microsoft Entra documentation page was updated: Quickstart Native Authentication Macos Sign In.
This tutorial demonstrates how to sign-in and sign-out a user with email one-time passcode or username and password in your Android mobile app by using native authentication.
This tutorial demonstrates how to sign up a user using email one-time passcode or username (email) and password, and collect user attributes in your Android mobile app using native authentication.
This tutorial demonstrates how to give users the ability to change or reset their password, with no administrator or help desk involvement.
This tutorial demonstrates how to sign-in and sign-out a user with email one-time passcode or username and password in your iOS/macOS app by using native authentication.
This tutorial demonstrates how to sign in user automatically after sign-up in an iOS/macOS app by using native authentication.
A Microsoft Entra documentation page was updated: Tutorial Native Authentication Ios Macos Sign Up.
This tutorial demonstrates how to acquire a token through a browser where native authentication isn't sufficient to complete the user flow.
In this tutorial, you learn how to reset password in a React single-page app (SPA) by using native authentication.
In this tutorial, you learn how to sign in users into a React single-page app (SPA) by using native authentication.
In this tutorial, you learn how to build a React single-page app that signs up users by using native authentication.
In this tutorial, you add the authentication and authorization elements to an ASP.NET Core web app. In the [previous tutorial](./tutorial-web-app-dotnet-prepare-app.md), you created an ASP.NET Core project and configured it for authentication.
This tutorial demonstrates how to add sign-in and sign-out code in .NET Multi-platform App UI (.NET MAUI) shell and run the app on the Windows platform.
This tutorial demonstrates how to add sign-in and sign-out code in .NET Multi-platform App UI (.NET MAUI) and how to run the app on the Android platform.
ai-usage: ai-assisted
A Microsoft Entra documentation page was updated: Quickstart Cli App Node Sign In Users.
author: OwenRichards1
A Microsoft Entra documentation page was updated: Quickstart Web App Node Sign In Call Api.
A Microsoft Entra documentation page was updated: Quickstart Web App Node Sign In Edit Profile.
In this tutorial, you learn how to add shared device mode support to an Android device with the Microsoft Authenticator App or a Mobile Device Management (MDM) tool like Microsoft Intune. Employees sign in once for single sign-on (SSO) to all SDM-supported apps and sign out to make the device ready for the next user with no access to previous data.
This tutorial is part 2 of the 3-part tutorial series.
zone_pivot_groups: entra-tenants
zone_pivot_groups: entra-tenants
This tutorial is part 2 of the 3-part tutorial series.
This tutorial guides you on securing a Python Flask Web app.
A Microsoft Entra documentation page was updated: Web App Node Sign In Call Api Prepare App.
A Microsoft Entra documentation page was updated: Web App Node Sign In Call Api Prepare Tenant.
A Microsoft Entra documentation page was updated: Web App Node Sign In Call Api Sign In Acquire Access Token.
A Microsoft Entra documentation page was updated: Tutorial Desktop Wpf Dotnet Sign In Prepare Tenant.
The Conditional Access optimization agent helps you ensure all users are protected by policy. It recommends policies and changes based on best practices aligned with [Zero Trust](/security/zero-trust/deploy/identity) and Microsoft's learnings. In preview, the agent evaluates policies requiring multifactor authentication (MFA), enforces device based controls (device compliance, app protection policies, and Domain Joined Devices), and blocks legacy authentication and device code flow.
- [Tutorial: Authenticate users to your WPF desktop application](./tutorial-desktop-wpf-dotnet-sign-in-build-app.md)
Microsoft Entra will update the "More information required" user interface during authentication method registration starting late April 2025, completing by late May 2025. The update will happen automatically with no admin action required. Notify users and update documentation as needed.
Learn about the customizable ways to deploy applications to end users in your organization with Microsoft Entra ID.
In this article, you learn how to enable self-service application access using the Microsoft Entra admin center.
|`aud` | String, an App ID GUID | Identifies the intended recipient of the token. In `id_tokens`, the audience is your app's Application ID, assigned to your app in the Azure portal. This value should be validated. The token should be rejected if it fails to match your app's Application ID. |
From **Enterprise applications** section:
Use the following steps to hide an application from My Apps portal and Microsoft 365 application launcher.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
The private network connector is a Windows Server service that directs traffic from your remote employees to your published applications. For more detailed installation instructions, see [Tutorial: Add an on-premises application for remote access through application proxy in Microsoft Entra ID](application-proxy-add-on-premises-application.md).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Use these instructions to add the SignalFx application to your list of managed SaaS apps.
To create a user account in your Microsoft Entra tenant:
You now need to register your application in Microsoft Entra ID.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
To configure the integration of Code42 into Microsoft Entra ID, you need to add Code42 from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](permissions-reference.md#cloud-application-administrator).
To configure the integration of FortiWeb Web Application Firewall into Microsoft Entra ID, you need to add FortiWeb Web Application Firewall from the gallery to your list of managed SaaS apps.
To configure the integration of FTAPI into Microsoft Entra ID, you need to add FTAPI from the gallery to your list of managed SaaS apps.
To grant tenant-wide admin consent to an app listed in **Enterprise applications** pane:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator) or application owner.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To configure the integration of Mapiq Essentials into Microsoft Entra ID, you need to add Mapiq Essentials from the gallery to your list of managed SaaS apps.
To configure the integration of Mapiq into Microsoft Entra ID, you need to add Mapiq from the gallery to your list of managed SaaS apps.
To configure the integration of Papirfly SSO into Microsoft Entra ID, you need to add Papirfly SSO from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
To configure the integration of Sapient into Microsoft Entra ID, you need to add Sapient from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Applications using the v2.0 tenant-independent metadata need to validate the signing key issuer.
To add an enterprise application to your tenant:
To configure the application properties:
To configure OIDC-based SSO for an application:
To enable SSO for an application:
To configure the application manifest:
Add on-premises applications to Microsoft Entra ID.
To set the cookie settings using the Microsoft Entra admin center:
To change the home page URL of your app through the Microsoft Entra admin center, follow these steps:
Getting started with link translation is as easy as clicking a button:
You can use Microsoft Intune to manage the client apps that your company's workforce uses. Intune provides capabilities such as data encryption and access requirements. Enable the Power BI mobile application with the Intune policy.
>[!Note]
**To publish your app**:
If you haven't already, [configure application proxy for your tenant and install the connector](~/identity/app-proxy/application-proxy-add-on-premises-application.md). Then, publish your on-premises application for remote access. Make note of the external URL because you use it to add the app to Teams.
Publish your application in Microsoft Entra. For a more detailed walkthrough of steps 1-8, see [Publish applications using Microsoft Entra application proxy](~/identity/app-proxy/application-proxy-add-on-premises-application.md).
To assign an owner to an enterprise application:
To assign a user or group account to an enterprise application:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
You can also configure group claims in the [optional claims](~/identity-platform/optional-claims.md) section of the [application manifest](~/identity-platform/reference-app-manifest.md).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Use the following steps to locate the enterprise application:
- To change the user consent settings in your organization, see [Configure how users consent to applications](~/identity/enterprise-apps/configure-user-consent.md).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Optional JWT claims can be configured in the the original application registration, however they can also be configured in the enterprise application. To view or edit the claims issued in the JWT to the application:
To review an application's permissions granted for the entire organization or to a specific user or group:
To enable self-service application access to an application, undertake the following steps:
Complete the following steps to enable Microsoft Entra single sign-on.
The first policy blocks access to all apps except for Microsoft 365 applications if not on a trusted location.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
// 'Enter the client ID obtained from the Microsoft Entra admin center
> First, register the web API in your Microsoft Entra tenant and add a scope by following these steps:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
To find the endpoints for an application you've registered, in the [Microsoft Entra admin center](https://entra.microsoft.com) navigate to:
To configure the integration of Veracode into Microsoft Entra ID, add Veracode from the gallery to your list of managed SaaS apps.
To view the enterprise applications registered in your tenant:
> First, register the web API in your Microsoft Entra tenant and add a scope by following these steps:
> 1. For **Supported account types**, select **Accounts in any organizational directory**.
| --- | --- |
| :------------------------------ | :----------------------------------------------------------- |
| Cookie setting | Default | Description | Recommendations |
| **Custom domain certificate** | Domain Name System (DNS): `nam.contoso.com` Subject Alternative Name (SAN): `www.contoso.com` | DNS: `india.contoso.com` SAN: `www.contoso.com` | In the certificate you upload for each app, set the SAN value to the alternate URL. The alternate URL is the URL all users use to reach the app.|
| --------------- | ----------- |
- **Enterprise Applications** shows non-Microsoft applications.
author: OwenRichards1
In this tutorial;
The request to your REST API is in the format shown in the following example. In this example, the request includes user identities information along with built-in attributes (givenName and companyName) and custom attributes (universityGroups, graduationYear, and onMailingList).
author: OwenRichards1
* An external tenant. To create one, choose from the following methods:
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
author: rwike77
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
author: cilwerner
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
author: OwenRichards1
author: henrymbuguakiarie
author: henrymbuguakiarie
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
author: Dickson-Mwendia
author: Dickson-Mwendia
author: Dickson-Mwendia
A Microsoft Entra documentation page was updated: Tutorial Dotnet Daemon Call Api.
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
author: Dickson-Mwendia
author: Dickson-Mwendia
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
A Microsoft Entra documentation page was updated: Tutorial Daemon Node Call Api Prepare Tenant.
In this tutorial;
When you assign a group to an application, only users in the group have access. The assignment doesn't cascade to nested groups.
- `Enter_the_Application_Id_Here` with the Application (client) ID of the client daemon app that you registered earlier.
| Scenario | Detailed scenario walk-through | OAuth 2.0 flow and grant | Audience |
Entra Connect uses the [Microsoft Entra Connector account](reference-connect-accounts-permissions#accounts-used-for-microsoft-entra-connect.md) to authenticate and sync identities from Active Directorty to Entra ID. This account uses username and password to authenticate requests. To enhance the security of the service, we are rolling out an application identity that uses Oauth 2.0 client credential flow with certificate credentials. In this new method, Entra or Administrator will create a single tenant 3rd party application in Entra ID and use one of the relevant certificate management options below for the credentials.
Learn about OAuth 2.0 and OpenID Connect in Microsoft identity platform. Explore authentication flows, endpoints, and secure user authentication.
1. Login with your admin account to Fortes Change Cloud. Select the **Settings icon** and then navigate to **User Provisioning (SCIM)**.
|Attribute|Type|Supported for filtering|Required by Insightly SAML|
1. On the **Basic SAML Configuration** section, perform the following steps:
| **AC-8 System Use Notification**<p><p>**The information system:**<br>**(a.)** Displays to users [*Assignment: organization-defined system use notification message or banner (FedRAMP Assignment: see additional Requirements and Guidance)*] before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance and states that:<br>(1.) Users are accessing a U.S. Government information system;<br>(2.) Information system usage may be monitored, recorded, and subject to audit;<br>(3.) Unauthorized use of the information system is prohibited and subject to criminal and civil penalties; and<br>(4.) Use of the information system indicates consent to monitoring and recording;<p><p>**(b.)** Retains the notification message or banner on the screen until users acknowledge the usage conditions and take explicit actions to log on to or further access the information system; and<p><p>**(c.)** For publicly accessible systems:<br>(1.) Displays system use information [*Assignment: organization-defined conditions (FedRAMP Assignment: see additional Requirements and Guidance)*], before granting further access;<br>(2.) Displays references, if any, to monitoring, recording, or auditing that are consistent with privacy accommodations for such systems that generally prohibit those activities; and<br>(3.) Includes a description of the authorized uses of the system.<p><p>**AC-8 Additional FedRAMP Requirements and Guidance:**<br>**Requirement:** The service provider shall determine elements of the cloud environment that require the System Use Notification control. The elements of the cloud environment that require System Use Notification are approved and accepted by the JAB/AO.<br>**Requirement:** The service provider shall determine how System Use Notification is going to be verified and provide appropriate periodicity of the check. The System Use Notification verification and periodicity are approved and accepted by the JAB/AO.<br>**Guidance:** If performed as part of a Configuration Baseline check, then the % of items requiring setting that are checked and that pass (or fail) check can be provided.<br>**Requirement:** If not performed as part of a Configuration Baseline check, then there must be documented agreement on how to provide results of verification and the necessary periodicity of the verification by the service provider. The documented agreement on how to provide verification of the results are approved and accepted by the JAB/AO. | **Display and require user acknowledgment of privacy and security notices before granting access to information systems.**<p>With Microsoft Entra ID, you can deliver notification or banner messages for all apps that require and record acknowledgment before granting access. You can granularly target these terms of use policies to specific users (Member or Guest). You can also customize them per application via Conditional Access policies.<p>Terms of use<br><li>[Microsoft Entra terms of use](~/identity/conditional-access/terms-of-use.md)<br><li>[View report of who has accepted and declined](~/identity/conditional-access/terms-of-use.md) |
| **IA-5(8)**<br>The organization implements [*FedRAMP Assignment: different authenticators on different systems*] to manage the risk of compromise due to individuals having accounts on multiple information systems. | **Implement security safeguards when individuals have accounts on multiple information systems.**<p>Implement single sign-on by connecting all applications to Microsoft Entra ID, as opposed to having individual accounts on multiple information systems.<p>[What is Azure single sign-on?](~/identity/enterprise-apps/what-is-single-sign-on.md) |
Entra Connect uses the [Microsoft Entra Connector account](entra/identity/hybrid/connect/reference-connect-accounts-permissions#accounts-used-for-microsoft-entra-connect.md) to authenticate and sync identities from Active Directorty to Entra ID. This account uses username and password to authenticate requests. To enhance the security of the service, we are rolling out an application identity that uses Oauth 2.0 client credential flow with certificate credentials. In this new method, Entra or Administrator will create a single tenant 3rd party application in Entra ID and use one of the relevant certificate management options below for the credentials.
To migrate a SAML 2.0 application to Microsoft Entra ID, configure the application in your Microsoft Entra tenant for application access. In this example, we convert a Salesforce instance.
| AU.L2-3.3.1<br><br>**Practice statement:** Create and retain system audit logs and records to enable monitoring, analysis, investigation, and reporting of unlawful or unauthorized system activity.<br><br>**Objectives:**<br>Determine if:<br>[a.] audit logs (for example, event types to be logged) to enable monitoring, analysis, investigation, and reporting of unlawful or unauthorized system activity are specified;<br>[b.] the content of audit records needed to support monitoring, analysis, investigation, and reporting of unlawful or unauthorized system activity is defined;<br>[c.] audit records are created (generated);<br>[d.] audit records, once created, contain the defined content;<br>[e.] retention requirements for audit records are defined; and<br>[f.] audit records are retained as defined.<br><br>AU.L2-3.3.2<br><br>**Practice statement:** Ensure that the actions of individual system users can be uniquely traced to those users so they can be held accountable for their actions.<br><br>**Objectives:**<br>Determine if:<br>[a.] the content of the audit records needed to support the ability to uniquely trace users to their actions is defined; and<br>[b.] audit records, once created, contain the defined content. | All operations are audited within the Microsoft Entra audit logs. Each audit log entry contains a user’s immutable objectID that can be used to uniquely trace an individual system user to each action. You can collect and analyze logs by using a Security Information and Event Management (SIEM) solution such as Microsoft Sentinel. Alternatively, you can use Azure Event Hubs to integrate logs with third-party SIEM solutions to enable monitoring and notification.<br>[Audit activity reports in the Azure portal](~/identity/monitoring-health/concept-audit-logs.md)<br>[Connect Microsoft Entra data to Microsoft Sentinel](/azure/sentinel/connect-azure-active-directory)<br>[Tutorial: Stream logs to an Azure event hub](~/identity/monitoring-health/howto-stream-logs-to-event-hub.md) |
Learn how to customize the claims issued by Microsoft identity platform in the SAML token for enterprise applications.
To configure the integration of CyberArk SAML Authentication into Microsoft Entra ID, you need to add CyberArk SAML Authentication from the gallery to your list of managed SaaS apps.
To configure the integration of RStudio Connect SAML Authentication into Microsoft Entra ID, you need to add RStudio Connect SAML Authentication from the gallery to your list of managed SaaS apps.
To configure the integration of RSP into Microsoft Entra ID, you need to add RStudio Server Pro SAML Authentication from the gallery to your list of managed SaaS apps.
To configure the integration of senhasegura SAML Authentication into Microsoft Entra ID, you need to add senhasegura SAML Authentication from the gallery to your list of managed SaaS apps.
Set up a SAML federation trust between the BIG-IP to allow the Microsoft Entra BIG-IP to hand off the preauthentication and [Conditional Access](~/identity/conditional-access/overview.md) to Microsoft Entra ID, before it grants access to the published VPN service.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
| Microsoft Entra authentication method| Phishing Resistant | NIST authenticator type |
To configure the integration of SAML SSO for Bamboo by resolution GmbH into Microsoft Entra ID, you need to add SAML SSO for Bamboo by resolution GmbH from the gallery to your list of managed SaaS apps.
1. On the **Select a single sign-on method** page, select **SAML**.
You can add the public cert to your application configuration within the Microsoft Entra admin center.
**To connect an application that supports SCIM:**
To configure the integration of Adobe Identity Management (SAML) into Microsoft Entra ID, you need to add Adobe Identity Management (SAML) from the gallery to your list of managed SaaS apps.
Delete your existing `customappsso` job and create a new SCIM job.
1. In addition to above, Athena Systems Login Platform application expects few more attributes to be passed back in SAML response which are shown below. These attributes are also pre populated but you can review them as per your requirements.
To configure the integration of SAML SSO for Bitbucket by resolution GmbH into Microsoft Entra ID, you need to add SAML SSO for Bitbucket by resolution GmbH from the gallery to your list of managed SaaS apps.
To configure the integration of Chronus SAML into Microsoft Entra ID, you need to add Chronus SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Citrix Cloud SAML SSO into Microsoft Entra ID, you need to add Citrix Cloud SAML SSO from the gallery to your list of managed SaaS apps.
To integrate Citrix ADC SAML Connector for Microsoft Entra ID with Microsoft Entra ID, first add Citrix ADC SAML Connector for Microsoft Entra ID to your list of managed SaaS apps from the gallery:
To configure the integration of Colossyan SAML into Microsoft Entra ID, you need to add Colossyan SAML from the gallery to your list of managed SaaS apps.
| CMMC practice statement and objectives | Microsoft Entra guidance and recommendations |
To configure the integration of Confluence SAML SSO by Microsoft into Microsoft Entra ID, you need to add Confluence SAML SSO by Microsoft from the gallery to your list of managed SaaS apps.
To configure the integration of ContractSafe Saml2 SSO into Microsoft Entra ID, you need to add ContractSafe Saml2 SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Curricula SAML into Microsoft Entra ID, you need to add Curricula SAML from the gallery to your list of managed SaaS apps.
To configure the integration of edX for Business SAML Integration into Microsoft Entra ID, you need to add edX for Business SAML Integration from the gallery to your list of managed SaaS apps.
1. On the **Select a single sign-on method** page, select **SAML**.
To configure the integration of Fareharbor SAML SSO into Microsoft Entra ID, you need to add Fareharbor SAML SSO from the gallery to your list of managed SaaS apps.
To configure the integration of FourKites SAML2.0 SSO for Tracking into Microsoft Entra ID, you need to add FourKites SAML2.0 SSO for Tracking from the gallery to your list of managed SaaS apps.
To configure the integration of Fullstory SAML into Microsoft Entra ID, you need to add Fullstory SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Insightly SAML into Microsoft Entra ID, you need to add Insightly SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Insignia SAML SSO into Microsoft Entra ID, you need to add Insignia SAML SSO from the gallery to your list of managed SaaS apps.
To configure the integration of Jamf Pro into Microsoft Entra ID, you need to add Jamf Pro from the gallery to your list of managed SaaS apps.
To configure the integration of JIRA SAML SSO by Microsoft (V5.2) into Microsoft Entra ID, you need to add JIRA SAML SSO by Microsoft (V5.2) from the gallery to your list of managed SaaS apps.
To configure the integration of JIRA SAML SSO by Microsoft into Microsoft Entra ID, you need to add JIRA SAML SSO by Microsoft from the gallery to your list of managed SaaS apps.
To configure the integration of Klaxoon SAML into Microsoft Entra ID, you need to add Klaxoon SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Mercado Eletronico SAML into Microsoft Entra ID, you need to add Mercado Eletronico SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Navigo Cloud SAML into Microsoft Entra ID, you need to add Navigo Cloud SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Oktopost SAML into Microsoft Entra ID, you need to add Oktopost SAML from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
To configure the integration of ON24 Virtual Environment SAML Connection into Microsoft Entra ID, you need to add ON24 Virtual Environment SAML Connection from the gallery to your list of managed SaaS apps.
To configure the integration of Profit.co into Microsoft Entra ID, you need to add Profit.co from the gallery to your list of managed SaaS apps.
To configure the integration of Resource Central – SAML SSO for Meeting Room Booking System into Microsoft Entra ID, you need to add Resource Central – SAML SSO for Meeting Room Booking System from the gallery to your list of managed SaaS apps.
To configure the integration of Microsoft Entra SAML Toolkit into Microsoft Entra ID, you need to add Microsoft Entra SAML Toolkit from the gallery to your list of managed SaaS apps.
To configure the integration of SAML 1.1 Token enabled LOB App into Microsoft Entra ID, you need to add SAML 1.1 Token enabled LOB App from the gallery to your list of managed SaaS apps.
To configure the integration of SAML SSO for Confluence by resolution GmbH into Microsoft Entra ID, you need to add SAML SSO for Confluence by resolution GmbH from the gallery to your list of managed SaaS apps.
To configure the integration of SAML SSO for Jira by resolution GmbH into Microsoft Entra ID, you need to add SAML SSO for Jira by resolution GmbH from the gallery to your list of managed SaaS apps.
To configure the integration of ShiftWizard SAML into Microsoft Entra ID, you need to add ShiftWizard SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Standard for Success Accreditation into Microsoft Entra ID, you need to add Standard for Success Accreditation from the gallery to your list of managed SaaS apps.
To configure the integration of Standard for Success K-12 into Microsoft Entra ID, you need to add Standard for Success K-12 from the gallery to your list of managed SaaS apps.
To configure the integration of Steeple SAML into Microsoft Entra ID, you need to add Steeple SAML from the gallery to your list of managed SaaS apps.
**To add Templafy OpenID Connect from the Microsoft Entra application gallery, perform the following steps:**
**To add Templafy SAML2 from the Microsoft Entra application gallery, perform the following steps:**
To configure the integration of Templafy SAML2 into Microsoft Entra ID, you need to add Templafy SAML2 from the gallery to your list of managed SaaS apps.
To configure the integration of Timeclock 365 SAML into Microsoft Entra ID, you need to add Timeclock 365 SAML from the gallery to your list of managed SaaS apps.
To know the patterns preconfigured for the application:
To configure the integration of Velpic SAML into Microsoft Entra ID, you need to add Velpic SAML from the gallery to your list of managed SaaS apps.
To configure the integration of Vtiger CRM (SAML) into Microsoft Entra ID, you need to add Vtiger CRM (SAML) from the gallery to your list of managed SaaS apps.
To configure the integration of WalkMe SAML2.0 into Microsoft Entra ID, you need to add WalkMe SAML2.0 from the gallery to your list of managed SaaS apps.
First, create an enterprise application in Microsoft Entra, which enables Microsoft Entra to generate SAML tokens for the relying party STS to provide to the application.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
The Microsoft Entra application gallery is a collection of software as a service (SaaS) [applications](~/identity-platform/app-objects-and-service-principals.md) that are preintegrated with Microsoft Entra ID. The collection contains thousands of applications that make it easy to deploy and configure [single sign-on (SSO)](~/identity-platform/single-sign-on-saml-protocol.md) and [automated user provisioning](~/identity/app-provisioning/user-provisioning.md).
Complete the following steps to enable Microsoft Entra single sign-on.
1. Finally, you need to acquire User Roster Realm IDs for both the sandbox and production environments in Cerner to complete the configuration. For information on how to acquire this, see: https://wiki.ucern.com/display/public/reference/Publishing+Identity+Data+Using+SCIM.
To change an application's SAML certificate signing options and the certificate signing algorithm:
To test SAML-based single sign-on between Microsoft Entra ID and a target application:
BIG-IP registration is the first step for SSO between entities. The app you create from the F5 BIG-IP gallery template is the relying party, representing the SAML SP for the BIG-IP published application.
Create a tenant app registration to authorize the Easy Button access to Graph. With these permissions, the BIG-IP pushes the configurations to establish a trust between a SAML SP instance for published application, and Microsoft Entra ID as the SAML IdP.
[Microsoft identity platform](~/identity-platform/quickstart-register-app.md) trusts a service or client, and then either can access Microsoft Graph. This action creates a tenant app registration to authorize Easy Button access to Graph. Through these permissions, the BIG-IP pushes the configurations to establish a trust between a SAML SP instance for published application, and Microsoft Entra ID as the SAML IdP.
This first step creates a tenant app registration to authorize the **Easy Button** access to Graph. With these permissions, the BIG-IP can push the configurations to establish a trust between a SAML SP instance for published application, and Microsoft Entra ID as the SAML IdP.
| 4| User is redirected back to BIG-IP (SAML SP) and SSO is performed using issued SAML token |
Create a tenant app registration to authorize the Easy Button access to Graph. The BIG-IP pushes configurations to establish a trust between a SAML SP instance for published application, and Microsoft Entra ID as the SAML IdP.
The following instructions help you create a tenant app registration to authorize Easy Button access to Graph. With these permissions, the BIG-IP pushes the configurations to establish a trust between a SAML SP instance for published application, and Microsoft Entra ID as the SAML IdP.
The following instructions help you create a tenant app registration to authorize Easy Button access to Graph. With these permissions, the BIG-IP pushes the configurations to establish a trust between a SAML SP instance for published application, and Microsoft Entra ID as the SAML IdP.
Register the Easy Button client in Microsoft Entra ID, then establishes a trust between SAML SP instances of a BIG-IP published application, and Microsoft Entra ID as the SAML IdP.
Complete the following steps to enable Microsoft Entra single sign-on.
In this step, we'll add the two attributes "HireDate" and "JobCode" that are not part of the standard SCIM schema to the provisioning app and use them in the provisioning data flow.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
|Memorized secret <br> (something you know)| Password <br> QR Code (PIN)|
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
|-|-|
- [OAuth 2.0 On-Behalf-Of flow](v2-oauth2-on-behalf-of-flow.md)
To view or edit the claims issued in the SAML token to the application:
1. Sign into the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
Complete the following steps to enable Microsoft Entra single sign-on.
Complete the following steps to enable Microsoft Entra single sign-on.
| --- | --- | --- |
Entra Connect creates and uses a [Microsoft Entra Connector account](reference-connect-accounts-permissions#accounts-used-for-microsoft-entra-connect.md) to authenticate and sync identities from Active Directory to Entra ID. This account uses a locally stored password to authenticate with Entra ID. To enhance the security of the Entra Connect and the sync process, the application will now support "Application based Authentication", which uses an Entra ID application based identity and [Oauth 2.0 client credential flow](identity-platform/v2-oauth2-client-creds-grant-flow.md) to authenticate with Entra ID. To enable this, Entra Connect will create a single tenant 3rd party application in customer's Entra ID tenant, register a certificate as the credential for the application, and authorize the application to perform on-premises directory synchronization. Entra Connect will support two ways to manage the certificate used in Application based authentication.
When users sign in to applications, they use OIDC or SAML. If the applications need to interact with Microsoft Graph or Microsoft Entra protected API, we recommend you configure them to use OIDC. This configuration ensures the JWT is applied to interact with Microsoft Graph. If there's no need for applications to interact with Microsoft Graph, or Microsoft Entra protected APIs, then use SAML.
`https://company.humanity.com/includes/saml/`
* **Disable symmetric key usage in applications**: Symmetric keys are similar to client secrets in that they're shared between the application and the resource it accesses. This means that if an attacker gains access to the symmetric key, they can impersonate the application and access the resource. Symmetric keys are also more difficult to manage than asymmetric keys, as they require both parties to share the same key.
Once you update your application management policy, you can confirm that it's applied by reading the default application management policy again as [shown earlier](#read-your-tenant-application-management-policy). The response should show the updated policy with the restrictions you applied.
1. Log in to your Standard for Success K-12 company site as an administrator with superuser access.
Policies can be applied to all applications in your organization or to specific applications. In this tutorial, you learn:
A Microsoft Entra documentation page was updated: Saml Claims Customization.
Entra Connect uses the [Microsoft Entra Connector account](entra/identity/hybrid/connect/reference-connect-accounts-permissions#accounts-used-for-microsoft-entra-connect.md) to authenticate and sync identities from Active Directorty to Entra ID. This account uses username and password to authenticate requests. To enhance the security of the service, we are rolling out an application identity that uses Oauth 2.0 client credential flow with certificate credentials. In this new method, Entra will create a single tenant 3rd party application in Entra ID and use one of the two certificate management options below for the credentials.
The OAuth 2.0 Resource Owner Password Credentials (ROPC) token grant flow is incompatible with MFA. After MFA is enabled in your Microsoft Entra tenant, ROPC-based APIs used in your applications throw exceptions. For more information about how to migrate from ROPC-based APIs in [Microsoft Authentication Libraries (MSAL)](/entra/msal/), see [How to migrate away from ROPC](/entra/identity-platform/v2-oauth-ropc#how-to-migrate-away-from-ropc). For language-specific MSAL guidance, see the following tabs.
In this tutorial, you learn how to enforce secret and certificate standards using application management policies in Microsoft Entra ID.
ai-usage: ai-assisted
ai-usage: ai-assisted
This tutorial is part 1 of a series that demonstrates building a Node.js command line interface (CLI) app and preparing it for authentication using the Microsoft Entra admin center. The client application you build uses the [OAuth 2.0 Authorization Code Flow](~/identity-platform/v2-oauth2-auth-code-flow.md) with Proof Key for Code Exchange (PKCE) for secure user authentication.
How to solve common protocol compatibility issues faced when adding a non-gallery application that supports SCIM 2.0 to Microsoft Entra ID
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
Regardless of which API is identified in the authorization request, the consent prompt is combined with all required permissions configured for the client app. All required permissions configured for each middle tier API listed in the client's required permissions list, which identified the client as a known client application, are also included.
The following conditions are required: identity, target resource, device platform, and client app. All other conditions are optional and are assumed to be set to **none** by default if no value is provided. For definitions of these conditions, see the article [Building a Conditional Access policy](concept-conditional-access-policies.md).

A Microsoft Entra documentation page was updated: Configure Security.
**Type:** New feature
author: najshahid
For more information about how these policies work together during migration, see [Manage authentication methods for Microsoft Entra ID](concept-authentication-methods-manage.md).
> If you use [external authentication methods](/entra/identity/authentication/how-to-authentication-external-method-manage), these are currently incompatible with authentication strength and you should use the **[Require multifactor authentication](concept-conditional-access-grant.md#require-multifactor-authentication)** grant control.
> If you use [external authentication methods](/entra/identity/authentication/how-to-authentication-external-method-manage), these are currently incompatible with authentication strength and you should use the **[Require multifactor authentication](concept-conditional-access-grant.md#require-multifactor-authentication)** grant control.
For the application that the administrator added to their tenant, they want to set it up so that all users in the organization can use it and not have to individually request consent to use it. To avoid the need for user consent, they can grant consent for the application on behalf of all users in the organization. For more information, see [Consent and permissions overview](./user-admin-consent-overview.md).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Attribute Definition Administrator](~/identity/role-based-access-control/permissions-reference.md#attribute-definition-administrator).
1. Make sure that you have defined custom security attributes. For more information, see [Add or deactivate custom security attribute definitions in Microsoft Entra ID](~/fundamentals/custom-security-attributes-add.md).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Attribute Assignment Administrator](~/identity/role-based-access-control/permissions-reference.md#attribute-assignment-administrator).
To enable security defaults:
To view [sign-in logs](/entra/identity/monitoring-health/concept-sign-ins) for these client types from the Microsoft Entra admin center:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Global Administrator](~/identity/role-based-access-control/permissions-reference.md#global-administrator).
Locations are defined and exist in the [Microsoft Entra admin center](https://entra.microsoft.com) under **Entra ID** > **Conditional Access** > **Named locations**. Administrators with at least the [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator) role can create and update named locations.
Administrators can also create up to 15 of their own custom authentication strengths to exactly suit their requirements. A custom authentication strength can contain any of the supported combinations in the preceding table.
Find these templates in the [Microsoft Entra admin center](https://entra.microsoft.com) > **Entra ID** > **Conditional Access** > **Create new policy from templates**. Select **Show more** to see all policy templates in each category.
:::image type="content" source="media/concept-filter-for-applications/edit-filter-for-applications.png" alt-text="A screenshot showing a Conditional Access policy with the edit filter window showing an attribute of require MFA." lightbox="media/concept-filter-for-applications/edit-filter-for-applications.png":::

- [Sign-ins requiring a Conditional Access compliant device](scenario-health-sign-ins-compliant-managed-device.md)
Organizations can choose to deploy this policy using the following steps or using the [Conditional Access templates](concept-conditional-access-policy-common.md).
> If you use [external authentication methods](/entra/identity/authentication/how-to-authentication-external-method-manage), these methods are currently incompatible with authentication strength and you should use the **[Require multifactor authentication](concept-conditional-access-grant.md#require-multifactor-authentication)** grant control.
The steps that follow help create a Conditional Access policy to require token protection for Exchange Online and SharePoint Online on Windows devices.
>[!IMPORTANT]
Policy 1: All users with an administrator role, accessing the Windows Azure Service Management API cloud app, and for Access controls, Grant access, but require multifactor authentication and require device to be marked as compliant.
Administrators can choose to require [specific authentication strengths](~/identity/authentication/concept-authentication-strengths.md) in their Conditional Access policies. These authentication strengths are defined in the **Microsoft Entra admin center** > **Entra ID** > **Authentication methods** > **Authentication strengths**. Administrators can choose to create their own or use the built-in versions.
Learn more: [What is Conditional Access?](~/identity/conditional-access/overview.md)
Administrators with the [Conditional Access Administrator](~/identity/role-based-access-control/permissions-reference.md#conditional-access-administrator) role can manage policies.
> If you use [external authentication methods](/entra/identity/authentication/how-to-authentication-external-method-manage), these are currently incompatible with authentication strength and you should use the **[Require multifactor authentication](concept-conditional-access-grant.md#require-multifactor-authentication)** grant control.
> [External authentication methods](/entra/identity/authentication/how-to-authentication-external-method-manage) are currently incompatible with authentication strength. You should use the **[Require multifactor authentication](concept-conditional-access-grant.md#require-multifactor-authentication)** grant control.
> If you use [external authentication methods](/entra/identity/authentication/how-to-authentication-external-method-manage), these are currently incompatible with authentication strength and you should use the **[Require multifactor authentication](concept-conditional-access-grant.md#require-multifactor-authentication)** grant control.
By default, system-preferred MFA is Microsoft managed and disabled for all users.
The Microsoft Entra admin center is organized by product. The products can be accessed through the search bar or left-hand menu.
Create a new group, named *MDM policy - West*. For more information about creating a group, see [How to create a basic group and add members](./how-to-manage-groups.yml).
**Service category:** Microsoft Entra Connect
Most recommendations follow the same pattern. You're provided information about how the recommendation works, its value, and some action steps to address the recommendation. This section provides an overview of the details provided in a recommendation, but aren't specific to one recommendation.
To access the Identity Secure Score:
If you observe that users aren't being provisioned, consult the [Provisioning logs](~/identity/monitoring-health/concept-provisioning-logs.md?context=azure/active-directory/manage-apps/context/manage-apps-context) in Microsoft Entra ID. Search for log entries for a specific user.
Audit log activities and categories change periodically. The tables are updated regularly, but might not be in sync with what is available in Microsoft Entra ID. Provide us with feedback if you think there's a missing audit category or activity.
Administrators can investigate the Sign-in logs to find cases with **IP address (seen by resource)**.
The following steps detail how an admin can verify sign in activity in the sign-in logs:
The sign-in logs might take several minutes for the flagged sign-in events to appear.
You can access the devices overview by completing these steps:
> [!CAUTION]
In our documentation, we primarily focus on the Microsoft Entra admin center and the shortest route to features. We guide users to features using a left to right navigation method like the following example:
To view the sign-in logs from the Microsoft Entra admin center:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](~/identity/role-based-access-control/permissions-reference.md#reports-reader).
The following table includes each FIDO2 security key model listed in MDS version 137 that's eligible for attestation with Microsoft Entra ID. For each model, the table shows its Authenticator Attestation Globally Unique Identifier (AAGUID) and feature capabilities.
Users can add and manage OATH tokens at [Security info](https://aka.ms/mysecurityinfo), or they can select **Security info** from **My account**. Software and hardware OATH tokens have different icons.
| Policy | Security defaults | Conditional Access | Per-user MFA |
A Microsoft Entra documentation page was updated: Configure Security.
| Migration states | Action plan |
The application registration process creates an application with several properties. These properties are required for our scenario.
**Type:** New feature
|:--------------------------|:----------------------------------------:|:----------------------:|:----:|
| Microsoft Entra ID | Microsoft Entra ID performs the authentication using the tenant directory stored in the cloud. |
QR code authentication is a single-factor method in which the PIN (something you know) is a credential.
| **Area** | **Member user permissions** | **Default guest user permissions** | **Restricted guest user permissions** |
In Domain Services, you can also create a forest *trust* with another domain to allow users to access resources. Depending on your access requirements, you can create the forest trust in different directions.
There are many kinds of tokens, but they generally fall into one of two categories:
- Investigate and identify any IP addresses identified in the CAE Workbook.
| Resources| Link and Description |
* [Microsoft Entra single sign-on](https://azure.microsoft.com/solutions/active-directory-sso/#overview) - secure and seamless access for users and apps, from any location, using a device
* [Microsoft Entra single sign-on](https://azure.microsoft.com/solutions/active-directory-sso/#overview) - secure and seamless access for users and apps, from any location, using a device
| 596 | Martinique |
How to identify and resolve license assignment problems when you're using Microsoft Entra group-based licensing.
* Microsoft Entra Connect synchronizes identities from your on-premises directory
| project Id,ConditionalAccessPolicies, Status,UserPrincipalName, AppDisplayName, ResourceDisplayName
author: jenniferf-skc
**Service category:** MS Graph
The hybrid reporting agent, used to send a MIM Service event log to Microsoft Entra to surface in password reset and self-service group management reports, is deprecated. The recommended replacement is to use Azure Arc to send the event logs to Azure Monitor. For more information, see: [Microsoft Identity Manager 2016 reporting with Azure Monitor](/microsoft-identity-manager/mim-azure-monitor-reporting).
**Type:** New feature
To aid in troubleshooting protocol tracking related errors, we’ve added a new property called **original transfer method** to the **activity details** section of the Conditional Access **sign-in logs**. This property displays the protocol tracking state of the request in question. For example, for a session in which device code flow was performed previously the **original transfer method** is set to **Device code flow**.
`[[-Certificate] <System.Security.Cryptography.X509Certificates.X509Certificate2> [-CertificateMapping] <string>]`
- [Conditional Access](../conditional-access/overview.md#license-requirements)
To protect against token theft and replay attacks, explore the types of tokens used in Microsoft Entra, their role in authentication, and strategies.
Learn more about how forest trust work with Microsoft Entra Domain Services
author: jenniferf-skc
Certificate UserIds follow a certain pattern for its values as per the UserName binding configurations on the tenant.
Microsoft Entra ID will update the user sign-in experience with Microsoft Authenticator Lite and the Microsoft Authenticator app to address accessibility issues. The rollout will occur from late March to late April 2025. Users will see a new message instructing them to refresh notifications if they don’t receive a sign-in request. No admin action is required.
- Policy 1: All users with an administrator role, accessing the Windows Azure Service Management API cloud app, and for Access controls, Grant access, but require multifactor authentication and require device to be marked as compliant.
author: najshahid
This topic covers steps to verify that users in your organization are set up to meet Azure's mandatory MFA requirements. For more information about which applications and accounts are affected and how the rollout works, see [Planning for mandatory multifactor authentication for Azure and other admin portals](concept-mandatory-multifactor-authentication.md).
|Control | Windows 10/11 | macOS | Linux|
For SMS verification, the following region codes require an opt-in. This means that if you'd like to use telecom in these regions, you'll have to reach out to support.
>[!NOTE]
author: gregkmsft
>[!NOTE]
The following list is provided as a reference and includes a detailed list of services and applications that are included in the Conditional Access [Office 365](concept-conditional-access-cloud-apps.md#office-365) app.
|:----------- |:---------------------------------------------- |
| AAD Connect Deprecated | Tenant | Preview | No | Hybrid Identity Administrator |
Explains requirements to prepare FIDO2 hardware for attestation with Microsoft Entra ID
author: najshahid
- Users can sign in with these passwordless authentication methods:
The authentication module is enabled and configured through the Azure portal and app settings. No SDKs, specific languages, or changes to application code are required. A variety of identity providers are supported, which includes Microsoft Entra ID, Microsoft Account, Facebook, Google, and X. When the authentication module is enabled, every incoming HTTP request passes through it before being handled by app code. To learn more, see [Authentication and authorization in Azure App Service](/azure/app-service/overview-authentication-authorization).
author: justinha
author: cilwerner
ai-usage: ai-assisted
- Examples of Other include if the source and target system details already match, so no change was made.
ai-usage: ai-assisted
The [Conditional Access optimization agent](../identity/conditional-access/agent-optimization.md) ensures all users are protected by policy. It recommends policies and changes based on best practices aligned with [Zero Trust](/security/zero-trust/deploy/identity) and Microsoft's learnings. In preview, the agent evaluates policies requiring multifactor authentication (MFA), enforces device based controls (device compliance, app protection policies, and Domain Joined Devices), and blocks legacy authentication and device code flow.
author: najshahid
>[!IMPORTANT]
author: justinha
In the Azure app registration for the client application:
A Microsoft Entra documentation page was updated: Scenario Spa App Registration.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com/) as at least an [Application Developer](/entra/identity/role-based-access-control/permissions-reference#application-developer).
Follow these steps for app registrations that are currently configured with **Web** platform redirect URIs:
To increase security by restricting token issuance only to client apps that have been assigned app roles:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-developer) and [Authentication Administrator](~/identity/role-based-access-control/permissions-reference.md#authentication-administrator).
An application is also created in your Microsoft Entra tenant that provides an identity for the pipeline. You need the display name of the app registration in later steps. To find the display name:
| [Authorization code](#authorization-code) | User sign-in and access to web APIs on behalf of the user. | [Desktop](scenario-desktop-app-registration.md) <br /> [Mobile](scenario-mobile-app-registration.md) <br /> [Single-page app (SPA)](scenario-spa-app-registration.md) (requires PKCE) <br /> [Web](scenario-web-api-call-api-app-registration.md) |
When you enabled the App Service authentication module, an app registration was created in your Microsoft Entra tenant. The app registration has the same display name as your web app. To check the settings, sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer) and browse to **Entra ID** > **App registrations**. Select the app registration that was created. In the overview, verify that **Supported account types** is set to **My organization only**.
When you build a mobile app that uses interactive authentication, the most critical registration step is the redirect URI. This experience enables your app to get single sign-on (SSO) through Microsoft Authenticator (and Intune Company Portal on Android). It also supports device management policies.
> | .NET Core | • [Call Microsoft Graph](https://github.com/Azure-Samples/ms-identity-dotnet-desktop-tutorial/tree/master/1-Calling-MSGraph/1-1-AzureAD) <br/> • [Call Microsoft Graph with token cache](https://github.com/Azure-Samples/ms-identity-dotnet-desktop-tutorial/tree/master/2-TokenCache) <br/> • [Call Microsoft Graph with custom web UI HTML](https://github.com/Azure-Samples/ms-identity-dotnet-desktop-tutorial/tree/master/3-CustomWebUI/3-1-CustomHTML) <br/> • [Call Microsoft Graph with custom web browser](https://github.com/Azure-Samples/ms-identity-dotnet-desktop-tutorial/tree/master/3-CustomWebUI/3-2-CustomBrowser) <br/> • [Sign in users with device code flow](https://github.com/Azure-Samples/ms-identity-dotnet-desktop-tutorial/tree/master/4-DeviceCodeFlow) <br/>• [Call Microsoft Graph by signing in users using username/password](https://github.com/azure-samples/active-directory-dotnetcore-console-up-v2) | [MSAL.NET](/entra/msal/dotnet) |• Authorization code with PKCE <br/> • Device code <br/> • Resource owner password credentials | | |
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
ID tokens aren't issued by default for an application registered with the Microsoft identity platform. ID tokens for an application are enabled by using one of the following methods:
After you delete an app registration, the app remains in a suspended state for 30 days. During that 30-day window, the app registration can be restored, along with all its properties. After that 30-day window passes, app registrations can't be restored, and the permanent deletion process may be automatically started. This functionality only applies to applications associated to a directory. It isn't available for applications from a personal Microsoft account, which can't be restored.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
To configure the list of statically requested permissions for an application:
1. In the [Microsoft Entra admin center](https://entra.microsoft.com), browse to **Entra ID** > **App registrations**.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](/entra/identity/role-based-access-control/permissions-reference#application-developer).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com/) as at least an [Application Developer](/entra/identity/role-based-access-control/permissions-reference#application-developer).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
The client ID is the unique **Application (client) ID** assigned to your app by Microsoft Entra ID when the app was registered. You can find the **Application (Client) ID** on the Overview page for the application in **Entra ID** > **Enterprise apps**.
The loggerOptions object has the following properties:
**To generate the redirect URI:**
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
- Some target systems implement request rate limits and throttling, which can impact performance during large sync operations. Under these conditions, an app that receives too many requests too fast might slow its response rate or close the connection. Gallery applications are configured to adhere to the rate limits set by the application developer, with no action required by an administrator configuring provisioning.
author: cilwerner
Learn how to add authentication to a JavaScript single-page app (SPA) using the Microsoft identity platform.
In this quickstart, you learn how to create a Microsoft Entra tenant for use in developing applications that use the Microsoft identity platform for authentication and authorization.
Learn how to add authentication to a React single-page app (SPA) using the Microsoft identity platform.
author: OwenRichards1
FIDO2 is supported for Android apps that use MSAL with [BROWSER as the authorization user agent](/entra/msal/android/msal-configuration#authorization_user_agent) or broker integration. Broker is shipped in Microsoft Authenticator, Company Portal, or Link to Windows app on Android.
In this tutorial, you learn how to acquire an access token and call an API in your Android mobile app. Microsoft Authentication Library (MSAL) native authentication SDK for Android allows you to acquire multiple access tokens with a single sign-in. This capability allows you to acquire one or more access tokens without requiring a user to reauthenticate.
This tutorial demonstrates how to add Microsoft Authentication Library (MSAL) native authentication SDK to an Android mobile app.
This tutorial demonstrates how to add Microsoft Authentication Library (MSAL) native authentication SDK framework to your iOS/macOS Swift app.
In this tutorial, you learn how to set up the CORS proxy server to manage CORS headers while interacting with native authentication API from a React single-page app (SPA). The CORS proxy server is a solution to the native authentication API's inability to support [Cross-Origin Resource Sharing (CORS)](https://developer.mozilla.org/docs/Web/HTTP/CORS).
In this tutorial you'll build a React single-page application (SPA) and prepare it for authentication using the Microsoft identity platform. This tutorial demonstrates how to create a React SPA using `npm`, create files needed for authentication and authorization and add your tenant details to the source code. The application can be used for employees in a workforce tenant or for customers using an external tenant.
This tutorial is the final part of a series that demonstrates building an Angular single-page application (SPA) and adding authentication using the Microsoft identity platform. In [Part 2 of this series](tutorial-single-page-apps-angular-sign-in-users-app.md), you created an Angular SPA and prepared it for authentication with your workforce tenant.
In this tutorial, Android developers learn how to add shared device mode support in an Android application using the Microsoft Authentication Library (MSAL) for Android.
In this tutorial, you test the sign in and sign out experience of your ASP.NET Core web app and view the claims in the ID token. In the [previous tutorial](./tutorial-web-app-dotnet-sign-in-users.md), you added the authentication elements, the sign-in, and sign-out experiences to the application to enable your app call a web API. For the purposes of this tutorial, the Microsoft Graph API is called to display the profile information of the logged-in user.
In this how-to guide, register a web API with the Microsoft identity platform and configure its scopes, exposing it to clients for permissions-based access to the API's resources.
Quickstart that shows how to configure a sample SPA that signs in employees or customers by using the Microsoft identity platform
* Application Developer
Learn how to test sign-in and sign-out in a JavaScript single-page app (SPA) using the Microsoft identity platform.
This tutorial demonstrates how to create a .NET MAUI shell app, add MSAL SDK support via MSALClient helper, and include an image resource.
This tutorial demonstrates how to add app roles to .NET Multi-platform App UI (.NET MAUI) shell and receive them in the ID token.
This tutorial demonstrates how to add app roles to .NET Multi-platform App UI (.NET MAUI) and receive them in the ID token.
In this quickstart, you learn how to configure app registration and API permissions for a Web API, and how to grant admin consent to these permissions.
This tutorial demonstrates how to create a .NET MAUI shell app, add MSALClient, and include an image resource.
Learn how to test sign-in and sign-out in a React single-page app (SPA) using the Microsoft identity platform.
ai-usage: ai-assisted
author: OwenRichards1
author: Dickson-Mwendia
author: OwenRichards1
author: OwenRichards1
author: OwenRichards1
author: OwenRichards1
author: OwenRichards1
author: OwenRichards1
author: henrymbuguakiarie
author: Dickson-Mwendia
author: henrymbuguakiarie
author: Dickson-Mwendia
author: henrymbuguakiarie
author: Dickson-Mwendia
If you completed all the steps in this multipart tutorial, you created an app service, app service hosting plan, and a storage account in a resource group. You also created an app registration in Microsoft Entra ID. When no longer needed, delete these resources and app registration so that you don't continue to accrue charges.
author: cilwerner
author: OwenRichards1
author: cilwerner
This tutorial series demonstrates how to protect an ASP.NET Core web API with the Microsoft identity platform to limit it's access to only authorized users and client apps. The web API you build uses both delegated permissions (scopes) and application permissions (app roles).
FIDO2 is supported for Android apps that use MSAL with [BROWSER as the authorization user agent](/entra/msal/android/msal-configuration#authorization_user_agent) or broker integration. Broker is shipped in Microsoft Authenticator, Company Portal, or Link to Windows app on Android.
Microsoft Entra is a platform that allows you to create and manage applications for your organization. You can grant different permissions to your applications, such as accessing data, or performing actions. It's important to review these permissions periodically to ensure they remain appropriate and secure.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../role-based-access-control/permissions-reference.md#search-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../role-based-access-control/permissions-reference.md#search-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../role-based-access-control/permissions-reference.md#search-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../role-based-access-control/permissions-reference.md#security-administrator).
In addition to querying the data with Kusto Query Language (KQL), you can create a custom workbook for further analysis and alerting. The least privileged role to create or update a workbook is the **Security Administrator** role.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) using the appropriate combination of roles.
<a name='azure-ad-activity-logs'></a>
To configure SSO for the Logz.io resource in the Azure portal, you need to add the Logz.io - Microsoft Entra Integration from the gallery to your list of managed SaaS apps.
To configure the integration of Saba TalentSpace into Microsoft Entra ID, you need to add Saba TalentSpace from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
To configure the integration of Alation Data Catalog into Microsoft Entra ID, you need to add Alation Data Catalog from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) with at least a [Reports reader](~/identity/role-based-access-control/permissions-reference.md#reports-reader) role
To configure the integration of AuditBoard into Microsoft Entra ID, you need to add AuditBoard from the gallery to your list of managed SaaS apps.
To configure the integration of BlogIn into Microsoft Entra ID, you need to add BlogIn from the gallery to your list of managed SaaS apps.
To configure the integration of Coralogix into Microsoft Entra ID, you need to add Coralogix from the gallery to your list of managed SaaS apps.
To configure the integration of Crowd Log into Microsoft Entra ID, you need to add Crowd Log from the gallery to your list of managed SaaS apps.
To configure the integration of Dotcom-Monitor into Microsoft Entra ID, you need to add Dotcom-Monitor from the gallery to your list of managed SaaS apps.
To configure the integration of Euromonitor International into Microsoft Entra ID, you need to add Euromonitor International from the gallery to your list of managed SaaS apps.
To configure the integration of ExpenseMe Pro (by Inlogik) into Microsoft Entra ID, you need to add ExpenseMe Pro (by Inlogik) from the gallery to your list of managed SaaS apps.
**To add Explanation-Based Auditing System from the gallery, perform the following steps:**
To configure the integration of Freight Audit into Microsoft Entra ID, you need to add Freight Audit from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
To configure the integration of JustLogin into Microsoft Entra ID, you need to add JustLogin from the gallery to your list of managed SaaS apps.
To configure the integration of LabLog into Microsoft Entra ID, you need to add LabLog from the gallery to your list of managed SaaS apps.
To configure the integration of LogicMonitor into Microsoft Entra ID, you need to add LogicMonitor from the gallery to your list of managed SaaS apps.
To configure the integration of LoginRadius into Microsoft Entra ID, you need to add LoginRadius from the gallery to your list of managed SaaS apps.
To configure the integration of Merchlogix into Microsoft Entra ID, you need to add Merchlogix from the gallery to your list of managed SaaS apps.
To configure the integration of N2F - Expense reports into Microsoft Entra ID, you need to add N2F - Expense reports from the gallery to your list of managed SaaS apps.
To configure the integration of Predictix Price Reporting into Microsoft Entra ID, you need to add Predictix Price Reporting from the gallery to your list of managed SaaS apps.
To configure the integration of PrinterLogic into Microsoft Entra ID, you need to add PrinterLogic from the gallery to your list of managed SaaS apps.
To configure the integration of SAP Business Technology Platform into Microsoft Entra ID, you need to add SAP Business Technology Platform from the gallery to your list of managed SaaS apps.
To configure the integration of SensoScientific Wireless Temperature Monitoring System into Microsoft Entra ID, you need to add SensoScientific Wireless Temperature Monitoring System from the gallery to your list of managed SaaS apps.
To configure the integration of SevOne Network Monitoring System (NMS) into Microsoft Entra ID, you need to add SevOne Network Monitoring System (NMS) from the gallery to your list of managed SaaS apps.
To configure the integration of SumoLogic into Microsoft Entra ID, you need to add SumoLogic from the gallery to your list of managed SaaS apps.
To configure the integration of Tracker Software Technologies into Microsoft Entra ID, you need to add Tracker Software Technologies from the gallery to your list of managed SaaS apps.
To configure the integration of Viareport (Europe) into Microsoft Entra ID, you need to add Viareport (Europe) from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Helpdesk Administrator](../role-based-access-control/permissions-reference.md#helpdesk-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
1. Sign into the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
Complete the following steps to enable Microsoft Entra single sign-on.
To see the tenant-level SLA:
The **MFA gaps** workbook is currently not available as a template, but you can import it from the Microsoft Entra workbooks GitHub repository.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) using the appropriate combination of roles.
Take five random entries and project the columns you wish to see in the results:
1. In a different web browser window, log in to your Sprinklr company site as an administrator.
1. In a different web browser window, log into your Gigya company site as an administrator.
1. Log in to the SolarWinds Orion and go to the **Settings** > **All Settings**.
1. In a different web browser window, sign in to your SumoLogic company site as an administrator.
1. Log in to your Check Point Harmony Connect website as an administrator.
1. Log in to your Documo website as an administrator.
1. Log in to ecFreight2 Application as an administrator.
1. Log in to iSAMS as an Administrator.
1. Log in to your Teamgo website as an administrator.
1. Log in to your Tulip instance as an Account Owner.
1. Log in to the VeraSMART as an administrator.
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
In addition to querying the data with Kusto Query Language (KQL), you can create a custom workbook for further analysis and alerting. The least privileged role to create or update a workbook is the **Security Administrator** role.
manager: femila
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as an [Attribute Assignment Administrator](~/identity/role-based-access-control/permissions-reference.md#attribute-assignment-administrator).
To configure the integration of Banyan Security Zero Trust Remote Access Platform into Microsoft Entra ID, you need to add Banyan Security Zero Trust Remote Access Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Cequence Application Security Platform into Microsoft Entra ID, you need to add Cequence Application Security Platform from the gallery to your list of managed SaaS apps.
To configure the integration of The Cloud Security Fabric into Microsoft Entra ID, you need to add The Cloud Security Fabric from the gallery to your list of managed SaaS apps.
To configure the integration of Contrast Security into Microsoft Entra ID, you need to add Contrast Security from the gallery to your list of managed SaaS apps.
To configure the integration of Coupa Risk Assess into Microsoft Entra ID, you need to add Coupa Risk Assess from the gallery to your list of managed SaaS apps.
To configure the integration of Coverity Static Application Security Testing into Microsoft Entra ID, you need to add Coverity Static Application Security Testing from the gallery to your list of managed SaaS apps.
To configure the integration of IMPAC Risk Manager into Microsoft Entra ID, you need to add IMPAC Risk Manager from the gallery to your list of managed SaaS apps.
To configure the integration of Imperva Data Security into Microsoft Entra ID, you need to add Imperva Data Security from the gallery to your list of managed SaaS apps.
To configure the integration of IriusRisk into Microsoft Entra ID, you need to add IriusRisk from the gallery to your list of managed SaaS apps.
To configure the integration of Kisi Physical Security into Microsoft Entra ID, you need to add Kisi Physical Security from the gallery to your list of managed SaaS apps.
To configure the integration of Menlo Security into Microsoft Entra ID, you need to add Menlo Security from the gallery to your list of managed SaaS apps.
To configure the integration of Netskope Administrator Console into Microsoft Entra ID, you need to add Netskope Administrator Console from the gallery to your list of managed SaaS apps.
To configure the integration of Riskware into Microsoft Entra ID, you need to add Riskware from the gallery to your list of managed SaaS apps.
To configure the integration of Rivial Cybersecurity Management Platform into Microsoft Entra ID, you need to add Rivial Cybersecurity Management Platform from the gallery to your list of managed SaaS apps.
To configure the integration of SailPoint Identity Security Cloud into Microsoft Entra ID, you need to add SailPoint Identity Security Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of SecurityStudio into Microsoft Entra ID, you need to add SecurityStudio from the gallery to your list of managed SaaS apps.
To configure the integration of Symantec Web Security Service (WSS) into Microsoft Entra ID, you need to add Symantec Web Security Service (WSS) from the gallery to your list of managed SaaS apps.
**To add Symantec Web Security Service (WSS) from the Microsoft Entra application gallery, perform the following steps:**
To configure the integration of TAP App Security into Microsoft Entra ID, you need to add TAP App Security from the gallery to your list of managed SaaS apps.
To configure the integration of Terranova Security Awareness Platform into Microsoft Entra ID, you need to add Terranova Security Awareness Platform from the gallery to your list of managed SaaS apps.
To configure the integration of TINFOIL SECURITY into Microsoft Entra ID, you need to add TINFOIL SECURITY from the gallery to your list of managed SaaS apps.
To configure the integration of Valence Security Platform into Microsoft Entra ID, you need to add Valence Security Platform from the gallery to your list of managed SaaS apps.
To configure the integration of Virtual Risk Manager into Microsoft Entra ID, you need to add Virtual Risk Manager from the gallery to your list of managed SaaS apps.
To configure the integration of Virtual Risk Manager - USA into Microsoft Entra ID, you need to add Virtual Risk Manager - USA from the gallery to your list of managed SaaS apps.
To access the workbook:
> Configure [adaptive protection](/purview/insider-risk-management-adaptive-protection) before you create the following policy.
Complete the following steps to enable Microsoft Entra single sign-on.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
1. To switch directories where you want to use Privileged Identity Management, select your user name in the upper right corner of the Microsoft Entra admin center.
For convenience, you can invite yourself and other members of your development team to be guest users in the tenant. This creates separate guest objects in the test tenant, but means you only have to manage one set of credentials for your corporate account and your test account.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
To configure the integration of Guardium Data Protection into Microsoft Entra ID, you need to add Guardium Data Protection from the gallery to your list of managed SaaS apps.
To configure the integration of Acronis Cyber Protect Cloud into Microsoft Entra ID, you need to add Acronis Cyber Protect Cloud from the gallery to your list of managed SaaS apps.
To configure the integration of CylancePROTECT into Microsoft Entra ID, you need to add CylancePROTECT from the gallery to your list of managed SaaS apps.
To configure the integration of Datto File Protection Single Sign On into Microsoft Entra ID, you need to add Datto File Protection Single Sign On from the gallery to your list of managed SaaS apps.
To configure the integration of Directory Services Protector into Microsoft Entra ID, you need to add Directory Services Protector from the gallery to your list of managed SaaS apps.
To configure the integration of Palo Alto Networks - GlobalProtect into Microsoft Entra ID, you need to add Palo Alto Networks - GlobalProtect from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
> - If a device becomes managed after MAM enrollment, app protection policy settings are no longer applied.
To register the TodoListClient app, follow these steps:
Users with this role have permissions to manage compliance-related features in the Microsoft Purview compliance portal, Microsoft 365 admin center, Azure, and Microsoft 365 Defender portal. Assignees can also manage all features within the Exchange admin center and create support tickets for Azure and Microsoft 365. For more information, see [Roles and role groups in Microsoft Defender for Office 365 and Microsoft Purview compliance](/microsoft-365/security/office-365-security/scc-permissions).
There are several capabilities you can enable to reduce your attack surface area and reduce the risk of successful token compromise. In the next sections we'll cover many Microsoft security capabilities that fall into one of three categories:
The following is a high-level summary capturing the key areas organizations should focus on as part of their token theft protection strategy.
author: jenniferf-skc
1. In a different web browser window, sign in to Brightidea using the administrator credentials.
The [`identifierUri`](#what-are-identifier-uris) - also referred to as `Application ID URI` - property of an Entra application is a required configuration for resource (API) applications. Ensuring the property is configured securely is critical to the application's security.
- Domain Administrator or Enterprise Administrator credentials to create the Microsoft Entra Connect cloud sync gMSA (group managed service account) to run the agent service.
Group membership based on user or device properties is supported for security groups and Microsoft 365 groups. When you apply a rule for a dynamic membership group, user and device attributes are evaluated for matches with the membership rule. When an attribute changes for a user or device, all rules for dynamic membership groups in the organization are processed for changes. Users and devices are added or removed if they meet the conditions for a dynamic membership group. In Microsoft Entra ID, a single tenant can have a maximum of 15,000 dynamic membership groups.
ai-usage: ai-assisted
ai-usage: ai-assisted
author: henrymbuguakiarie
author: cilwerner
When you've completed the guide, your application will able to call a protected API that uses personal accounts (including outlook.com, live.com, and others). The application will also use work and school accounts from any company or organization that uses Microsoft Entra ID.
This tutorial is the final part of a series that demonstrates building and testing a protected web API registered in a Microsoft Entra tenant. In [Part 1 of this series](tutorial-web-api-dotnet-core-build-app.md), you created an ASP.NET Core web API and protected its endpoints. You'll now create a lightweight daemon app, register it in your tenant, and use the daemon app to test the web API you built.
ai-usage: ai-assisted
- MFA registered guest users remediate their own user risk. The guest user [resets or changes a secured password](https://aka.ms/sspr) at their home tenant (this needs MFA and self service password reset (SSPR) at the home tenant). The secured password change or reset must be initiated on Microsoft Entra ID and not on-premises.
| AADSTS50088 | Limit on telecom MFA calls reached. Please try again in a few minutes. |
How to resolve issues with Microsoft Entra sign-in when the app returns an error message.
Apple's app-site-association domains are critical for SSO extension functioning. (*) You only need to allow sovereign cloud domains if you rely on those in your environment. (**) Maintaining communications with the Experimentation Configuration Service (ECS) ensures that Microsoft can respond to a severe bug in a timely manner.
**Remediation action**
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](~/identity/role-based-access-control/permissions-reference.md#security-administrator).
**Potential issue**: **WamDefaultSet** and **AzureAdJoined** both have "NO" in the field value, the device was domain-joined and registered with Microsoft Entra ID, and the device doesn't sync. If it's showing this, the device might need to wait for policy to be applied or the authentication for the device failed when connecting to Microsoft Entra ID. The user might have to wait a few hours for the policy to be applied. Other troubleshooting steps might include retrying autoregistration by signing out and back in, or launching the task in Task Scheduler. In some cases, running "*dsregcmd.exe /leave*" in an elevated command prompt window, rebooting, and trying registration again might help with this issue.
| AADSTS5001256 | Failed to complete authentication with external provider due to invalid id_token. Failure details: {details} |
To find out which Conditional Access policy or policies applied and why, follow these steps.
The [What If tool](what-if-tool.md) in Conditional Access is powerful when trying to understand why a policy was or wasn't applied to a user in a specific circumstance or if a policy would apply in a known state.
- **I don't know who my Microsoft Entra Global Administrator (also known as company admin or tenant admin) is, how do I find them? What about the Application Administrator or Cloud Application Administrator?**
To add an attribute in the Microsoft Entra configuration that will be sent in the Microsoft Entra response, follow these steps:
Administrators can monitor user sign-ins where continuous access evaluation (CAE) is applied. This information is found in the Microsoft Entra sign-in logs:
Once the service is configured, most insights into the operation of the service can be drawn from two places.
- Stream data to Event Hubs
To access the Microsoft Entra sign-in logs:
To configure password-based SSO by using automatic sign-in field capture, follow these steps:
**Remediation action**
This article provides the steps to access diagnostic settings for the Microsoft Entra logs. If you need to configure diagnostic settings for Azure Monitor or Azure resources outside of Microsoft Entra ID, see [Diagnostic settings in Azure Monitor](/azure/azure-monitor/essentials/diagnostic-settings).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](../role-based-access-control/permissions-reference.md#reports-reader).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
If you have a Windows 11 or Windows 10 device that isn't working with Microsoft Entra ID correctly, start your troubleshooting here.
If a user has insufficient permissions to complete Microsoft Entra ID join and registration, no error message is shown. For the device join and registration to complete successfully, the user initiating the registration flow must be allowlisted.
To validate that a configuration is appropriate, an administrator could use the What If tool to mimic access, from a location that should be allowed and from a location that should be denied.
| Troubleshooting | Details |
| Error | Solution |
1. Browse to **Identity** > **Monitoring & health** > **Sign-in logs**.
- Authorization Request Types
Navigate to **Microsoft Entra ID** > **Sign-ins** on the [[Microsoft Entra admin center](https://entra.microsoft.com)](https://portal.azure.com/) and click a specific user's sign-in activity. Look for the **SIGN-IN ERROR CODE** field. Map the value of that field to a failure reason and resolution using the following table:
| AADSTS50048 | SubjectMismatchesIssuer - Subject mismatches Issuer claim in the client assertion. Contact the tenant admin. |
author: MicrosoftGuyJFlo
2. If it returns `EnableGroupCreation : True`, then nonadmin users can create groups. To disable this feature:
Troubleshoot common issues faced when a user isn't appearing in a Microsoft Entra Gallery Application configured for user provisioning with Microsoft Entra ID.
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
Learn how the Microsoft Entra Conditional Access optimization agent can help secure your organization.
1. Select **View details** under the Conditional Access Optimization Agent, then select **Start agent** to begin your first run.
Before you convert to Conditional Access, confirm the base MFA tenant settings for your organization.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](~/identity/role-based-access-control/permissions-reference.md#conditional-access-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator).
To access the insights and reporting workbook:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator).
Administrators with at least the [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator) role assigned find these policies in the [Microsoft Entra admin center](https://entra.microsoft.com) under **Entra ID** > **Conditional Access** > **Policies**.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](~/identity/role-based-access-control/permissions-reference.md#conditional-access-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator).
> Without a compliance policy created in Microsoft Intune, this Conditional Access policy won't function as intended. Create a compliance policy first and ensure you have at least one compliant device before proceeding.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator).
> Make sure you understand how Conditional Access works before setting up a policy to manage access to Windows Azure Service Management API. Make sure you don't create conditions that could block your own access to the portal.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Conditional Access Administrator](../role-based-access-control/permissions-reference.md#conditional-access-administrator).
You can find the **What If** tool in the **Microsoft Entra admin center** > **Entra ID** > **Conditional Access** > **Policies** > **What If**.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) using the appropriate combination of roles.
The Conditional Access optimization agent helps you ensure all users are protected by policy. It recommends policies and changes based on best practices aligned with [Zero Trust](/security/zero-trust/deploy/identity) and Microsoft's learnings.
- Learn more about Conditional Access policy application by using the policies report-only mode in [Conditional Access insights and reporting](howto-conditional-access-insights-reporting.md).
**Ensure that every app has at least one Conditional Access policy applied**. From a security perspective it's better to create a policy that encompasses **All resources (formerly 'All cloud apps')**. This practice ensures you don't need to update Conditional Access policies every time you onboard a new application.
author: MicrosoftGuyJFlo
Use custom extensions to create workflows using tools like Azure Logic Apps. For workflows, you can enable custom task extensions to call out to external systems. For example, a Joiner workflow with a custom task extension assigns a Microsoft Teams number. Or, when a user becomes a Leaver, a separate workflow grants access to an email account for their manager.
Before you begin, we recommend you create a security group, which contains external users who access resources. See, [Quickstart: Create a group with members and view all groups and members in Microsoft Entra ID](~/fundamentals/groups-view-azure-portal.md).
The relying party STS will be trusted by applications to provide tokens indicating users have been authenticated. This requires that you ensure the STS, the servers hosting it, and any upstream domain controllers or other resources, are locked down to the same security standards as the other identity infrastructure in your environment.
Guest users are invited to have access to resources.
Verify that your application is accessible through application proxy accessing it via the external URL.
1. The Microsoft Entra provisioning service queries the ECMA Connector Host to see if the user exists. It uses the **matching attribute** as the filter. This attribute is defined in the Microsoft Entra admin center under Enterprise applications -> On-premises provisioning -> provisioning -> attribute matching. It's denoted by the 1 for matching precedence.
manager: martinco
manager: martinco
To configure the integration of Smart Global Governance into Microsoft Entra ID, you need to add Smart Global Governance from the gallery to your list of managed SaaS apps.
To create the Hybrid Identity Administrator account:
**To configure Workday to Active Directory provisioning:**
To configure the integration of SCC LifeCycle into Microsoft Entra ID, you need to add SCC LifeCycle from the gallery to your list of managed SaaS apps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Hybrid Identity Administrator](~/identity/role-based-access-control/permissions-reference.md#hybrid-identity-administrator).
**To configure Workday to Microsoft Entra provisioning for cloud-only users:**
1. Sign in to the Windows server where the Provisioning Agent is installed.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Organizational Branding Administrator](../identity/role-based-access-control/permissions-reference.md#organizational-branding-administrator).
| Role | Can do | Can't do |
1. **Create equivalent** [user risk-based](#user-risk-policy-in-conditional-access) and [sign-in risk-based](#sign-in-risk-policy-in-conditional-access) policies in Conditional Access in report-only mode. You can create a policy with the previous steps or using [Conditional Access templates](~/identity/conditional-access/concept-conditional-access-policy-common.md) based on Microsoft's recommendations and your organizational requirements.
To view and investigate a risky user:
Organizations can find workload identities flagged for risk in one of two locations:
author: shlipsey3
Microsoft Purview Insider Risk Management will soon allow analysts to identify compromised user alerts in Microsoft Entra. The rollout starts mid-May 2025 (worldwide) and early-August 2025 (GCC, GCC High, DoD). Risk detections will be visible in the alert investigation experience but won't affect risk scores. No admin action is required.
author: shlipsey3
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](~/identity/role-based-access-control/permissions-reference.md#security-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](~/identity/role-based-access-control/permissions-reference.md#security-administrator).
In Identity Protection:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](~/identity/role-based-access-control/permissions-reference.md#security-administrator).
- **The recipients of this email**
You can access the dashboard by:
:::image type="content" source="media/workbook-risk-based-policy-impact/workbook-risk-based-impact-trusted-network.png" alt-text="Screenshot showing the trusted network section of the workbook." lightbox="media/workbook-risk-based-policy-impact/workbook-risk-based-impact-trusted-network.png":::
The risk reports are found in the [Microsoft Entra admin center](https://entra.microsoft.com) under **ID Protection**. You can navigate directly to the reports or view a summary of important insights in the dashboard view and navigate to the corresponding reports from there.
To configure this setting:
Once updated, you can go to the edited policy, and confirm the change by selecting **Approval stage details**:
An how-to guide on dynamically determining the approval requirements for an access package externally using a custom extension.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../identity/role-based-access-control/permissions-reference.md#security-administrator). Make sure you have access to the resource group containing the Azure Monitor workspace.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator) and [Attribute Assignment Administrator](../identity/role-based-access-control/permissions-reference.md#attribute-assignment-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
To create an access review:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
For the tutorial, the **mail** attribute only needs to be set on the manager account and the **manager** attribute set on the employee account. Use the following steps:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com)
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
Now that you have identified the integration pattern for the application, check the application as represented in Microsoft Entra ID is ready for review.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](~/identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Global Administrator](~/identity/role-based-access-control/permissions-reference.md#global-administrator) or [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator) with Catalog Owner permissions.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Identity Governance Administrator](../identity/role-based-access-control/permissions-reference.md#identity-governance-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Global Administrator](~/identity/role-based-access-control/permissions-reference.md#global-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](~/identity/role-based-access-control/permissions-reference.md#application-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](~/identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](~/identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a user that is assigned to one or more prerequisite roles.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a user that is assigned to one of the prerequisite roles.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a User Access Administrator.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](~/identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Lifecycle Workflows Administrator](../identity/role-based-access-control/permissions-reference.md#lifecycle-workflows-administrator).
Use the following steps to create a leaver on-demand workflow that executes a real-time employee termination by using lifecycle workflows in the Microsoft Entra admin center:
Use the following steps to create a pre-hire workflow that generates a TAP and send it via email to the user's manager using the Microsoft Entra admin center.
Use the following steps to create a scheduled leaver workflow that will automatically perform off-boarding tasks for employees after their last day of work with Lifecycle workflows using the Microsoft Entra admin center.
1. Create an authorization policy based on the following table:
You need to have attributes populated on the users who will be in scope for being assigned access. The attributes you can use in the rules criteria of an access package assignment policy are those attributes listed in [supported properties](../identity/users/groups-dynamic-membership.md#supported-properties), along with [extension attributes and custom extension properties](../identity/users/groups-dynamic-membership.md#extension-attributes-and-custom-extension-properties). These attributes can be brought into Microsoft Entra ID by [patching](../identity/app-provisioning/user-provisioning-sync-attributes-for-mapping.md#create-an-extension-attribute-for-cloud-only-users-using-microsoft-graph) the [user](/graph/api/resources/user), an HR system such as [SuccessFactors](../identity/app-provisioning/sap-successfactors-integration-reference.md), [Microsoft Entra Connect cloud sync](../identity/hybrid/cloud-sync/how-to-attribute-mapping.md) or [Microsoft Entra Connect Sync](../identity/hybrid/connect/how-to-connect-sync-feature-directory-extensions.md). The rules can include up to 15,000 users per policy.
|[LCW + Custom Extensions (Logic Apps)](~/id-governance/lifecycle-workflow-extensibility.md)|||| :white_check_mark: | :white_check_mark: |
Once you've created the custom extension and Logic app, you can reference the custom extension in an access package assignment policy by doing the following steps:
}
| [Remove all access package assignments for user](../id-governance/lifecycle-workflow-tasks.md#remove-all-access-package-assignments-for-user) | 42ae2956-193d-4f39-be06-691b8ac4fa1d | Leaver |
This article describes how to work with lifecycle workflows using Security Copilot in the Microsoft Entra admin center. Using this feature requires [Microsoft Entra ID Governance licenses](/entra/id-governance/identity-governance-overview#license-requirements).
1. Sign into the [Microsoft Entra admin center](https://entra.microsoft.com) as a [License Administrator](../identity/role-based-access-control/permissions-reference.md#license-administrator).
This article describes how to work with lifecycle workflows using Security Copilot in the Microsoft Entra admin center. Using this feature requires [Microsoft Entra ID Governance licenses](/entra/id-governance/identity-governance-overview#license-requirements).
The Microsoft Entra ID Governance capabilities are currently available in six standalone products. These six products provide the same identity governance capabilities. The difference between the six products is that they have different prerequisites.
As an inviting organization, you might not know ahead of time who the individual external collaborators are who need access to your resources. You need a way for users from partner companies to sign themselves up with policies that you control. You can use [Microsoft Entra entitlement management](~/id-governance/entitlement-management-overview.md) to configure policies, which [manage access for external users](~/id-governance/entitlement-management-external-users.md#how-access-works-for-external-users). Then users from other organizations can request access, and upon approval be provisioned with guest accounts and assigned to groups, apps, and SharePoint Online sites.
* When a user who isn't yet in your directory signs in to the My Access portal to request an access package, be sure they authenticate using their organizational account. The organizational account can be either an account in the resource directory, or in a directory that is included in one of the policies of the access package. If the user's account isn't an organizational account, or the directory where they authenticate isn't included in the policy, then the user won't see the access package. For more information, see [Request access to an access package](entitlement-management-request-access.md).
**Scenario:** Manage on-premises applications with Active Directory groups that are provisioned from and managed in the cloud. Microsoft Entra Cloud Sync allows you to fully govern application assignments in AD while taking advantage of Microsoft Entra ID Governance features to control and remediate any access related requests.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](../identity/role-based-access-control/permissions-reference.md#user-administrator).
Next, you create an app registration in Microsoft Entra ID, so that Microsoft Entra ID recognizes your Azure Automation runbook's certificate for authentication.
- Allow the use of unenlightened apps, but block them from accessing Microsoft resources using a special WDAC policy, called an “AppIdTagging policy”.
1. Select **OK**.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Privileged Role Administrator](/entra/identity/role-based-access-control/permissions-reference#privileged-role-administrator).
Default cross-tenant access settings apply to all external organizations for which you haven't created organization-specific customized settings. If you want to modify the Microsoft Entra ID-provided default settings, follow these steps.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
1. If you have access to multiple tenants, use the **Settings** icon :::image type="icon" source="media/common/admin-center-settings-icon.png" border="false"::: in the top menu to switch to your external tenant from the **Directories + subscriptions** menu.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [External Identity Provider Administrator](~/identity/role-based-access-control/permissions-reference.md#external-identity-provider-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](/entra/identity/role-based-access-control/permissions-reference#user-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as a [Global Administrator](/entra/identity/role-based-access-control/permissions-reference#global-administrator).
After you create the Apple app, in this step you set the Apple app details in Microsoft Entra External ID. You can use the Microsoft Entra admin center to do so. To configure Apple federation in the Microsoft Entra admin center, follow these steps:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
You can add up to five sponsors when inviting a new guest user. If you don’t specify a sponsor, the inviter will be added as a sponsor. To invite a guest user, you need to have at least the [Guest Inviter](/entra/identity/role-based-access-control/permissions-reference#guest-inviter) or [User Administrator](/entra/identity/role-based-access-control/permissions-reference#user-administrator) role.
In your Microsoft cloud settings, enable the Microsoft Azure cloud you want to collaborate with.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Domain Name Administrator](~/identity/role-based-access-control/permissions-reference.md#domain-name-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [External Identity Provider Administrator](~/identity/role-based-access-control/permissions-reference.md#external-identity-provider-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [External Identity Provider Administrator](~/identity/role-based-access-control/permissions-reference.md#external-identity-provider-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
"extension_831374b3bd5041bfaa54263ec9e050fc_loyaltyNumber": "212342"
To configure the integration of Zscaler B2B User Portal into Microsoft Entra ID, you need to add Zscaler B2B User Portal from the gallery to your list of managed SaaS apps.
1. If you have access to multiple tenants, use the **Settings** icon :::image type="icon" source="~/external-id/customers/media/common/admin-center-settings-icon.png" border="false"::: in the top menu to switch to your external tenant from the **Directories + subscriptions** menu.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Groups Administrator](../../../../identity/role-based-access-control/permissions-reference.md#groups-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Privileged Role Administrator](../../../../identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to your organization's [Microsoft Entra admin center](https://entra.microsoft.com/) as at least a [Tenant Creator](/entra/identity/role-based-access-control/permissions-reference#tenant-creator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Privileged Role Administrator](../../../../identity/role-based-access-control/permissions-reference.md#privileged-role-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
2. Select the directory you want to link: In the Microsoft Entra admin center toolbar, select the **Settings** icon in the portal toolbar. Then on the **Portal settings | Directories + subscriptions** page, find your workforce tenant in the **Directory name** list, and then select **Switch**.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [External Identity Provider Administrator](~/identity/role-based-access-control/permissions-reference.md#external-identity-provider-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. If you have access to multiple tenants, use the **Settings** icon :::image type="icon" source="~/external-id/customers/media/common/admin-center-settings-icon.png" border="false"::: in the top menu to switch to your external tenant from the **Directories + subscriptions** menu.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
You can create a group containing all users within a tenant using a membership rule. When users are added or removed from the tenant in the future, the group's membership is adjusted automatically.
Language customization enables you to customize any string in your user flow.
1. In **Cross-tenant access settings**, [add each domain/tenant as an organization under Organizational settings](cross-tenant-access-settings-b2b-collaboration.yml#add-an-organization).
|Header name |Header Value | Sample Value |
| Users must accept a [consent prompt](~/external-id/redemption-experience.md#consent-experience-for-the-guest) | No | No | No |
Tenant Restrictions v2 will not be enforced with request going across cross clouds.
Microsoft Entra B2B collaboration is currently subject to the limitations described in this article.
> [!div class="mx-tdCol2BreakAll"]
> [!div class="mx-tdCol2BreakAll"]
Step 1: **Configuring allowed list of partner tenants**
In this tutorial, learn how to require multifactor authentication when you use Microsoft Entra B2B to collaborate with external users and partner organizations.
Reference documentation for a custom authentication extension that invokes the OnAttributeCollectionStart event for External ID customer configurations.
Reference documentation for a custom authentication extension that invokes the OnAttributeCollectionSubmit event for External ID customer configurations.
Microsoft Entra External ID pricing is based on monthly active users (MAU), which is the count of unique users with authentication activity within a calendar month. External ID consists of a core offer and premium add-ons. The Microsoft Entra External ID core offering is free for the first 50,000 MAU. For the latest information about usage billing and pricing, see [Billing model for Microsoft Entra External ID](../external-identities-pricing.md).
1. If you have access to multiple tenants, use the **Settings** icon :::image type="icon" source="media/common/admin-center-settings-icon.png" border="false"::: in the top menu to switch to your external tenant from the **Directories + subscriptions** menu.
1. Select the **Directories + subscriptions** icon in the toolbar.
To configure an API Connector with HTTP basic authentication, follow these steps:
1. Select the **Directories + subscriptions** icon in the toolbar.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Authentication Policy Administrator](~/identity/role-based-access-control/permissions-reference.md#authentication-policy-administrator).
To enable sign-in for users with a Microsoft account, you need to create an application in a Microsoft Entra ID tenant. The resource tenant for the application can be any Microsoft Entra ID tenant, like your workforce or external tenant.
For the customer users to see the sign-up or sign-in experience when they use your app, you need to associate your app with a user flow. Although many applications can be associated with your user flow, a single application can only be associated with one user flow.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. If you have access to multiple tenants, use the **Settings** icon :::image type="icon" source="media/common/admin-center-settings-icon.png" border="false"::: in the top menu to switch to your external tenant from the **Directories + subscriptions** menu.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [External ID User Flow Administrator](~/identity/role-based-access-control/permissions-reference.md#external-id-user-flow-administrator).
The following diagram illustrates the authentication flow when a Microsoft Entra organization shares resources with users from other Microsoft Entra organizations. This diagram shows how cross-tenant access settings work with Conditional Access policies, such as multifactor authentication, to determine if the user can access resources. This flow applies to both B2B collaboration and B2B direct connect, except as noted in step 6.
Client certificate authentication is a mutual certificate-based authentication. The client, Microsoft Entra ID, provides its client certificate to the server to prove its identity as part of the SSL handshake. Your API is responsible for validating the certificates belong to a valid client, such as Microsoft Entra ID, and performing authorization decisions. The client certificate is an X.509 digital certificate.
This tutorial is the final part of a series that demonstrates building a Windows Presentation Form (WPF) desktop app and preparing it for authentication using the Microsoft Entra admin center. In [Part 1 of this series](./tutorial-desktop-wpf-dotnet-sign-in-prepare-tenant.md), you registered an application and configured user flows in your external tenant. This tutorial demonstrates how to build your .NET WPF desktop app and sign in and sign out a user using Microsoft Entra External ID.
This tutorial is the final part of a series that demonstrates building a Windows Presentation Form (WPF) desktop app and preparing it for authentication using the Microsoft Entra admin center. In [Part 1 of this series](./tutorial-desktop-wpf-dotnet-sign-in-prepare-tenant.md), you registered an application and configured user flows in your external tenant. This tutorial demonstrates how to build your .NET WPF desktop app and sign in and sign out a user using Microsoft Entra External ID.
"AllowNativeFederation": true,
1. Start PowerShell and connect to your tenant:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [User Administrator](~/identity/role-based-access-control/permissions-reference.md#user-administrator).
After you create the Facebook application, in this step you set the Facebook client ID and client secret in Microsoft Entra ID. You can use the Microsoft Entra admin center or PowerShell to do so. To configure Facebook federation in the Microsoft Entra admin center, follow these steps:
After you create the Google application, in this step you set the Google client ID and client secret in Microsoft Entra ID. You can use the Microsoft Entra admin center or PowerShell to do so. To configure Google federation in the Microsoft Entra admin center, follow these steps:
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Administrator](../../../../identity/role-based-access-control/permissions-reference.md#application-administrator).
1. If you have access to multiple tenants, use the **Settings** icon :::image type="icon" source="~/external-id/customers/media/common/admin-center-settings-icon.png" border="false"::: in the top menu to switch to your external tenant from the **Directories + subscriptions** menu.
1. If you have access to multiple tenants, use the **Settings** icon :::image type="icon" source="~/external-id/customers/media/common/admin-center-settings-icon.png" border="false"::: in the top menu to switch to your external tenant from the **Directories + subscriptions** menu.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
> [!IMPORTANT]
1. Select **All applications** to view a list of all your applications. If your application doesn't appear in the list, use the filters at the top of the **All applications** list to restrict the list, or scroll down the list to locate your application.
You need to register your approval system as an application in your Microsoft Entra tenant so it can authenticate with Microsoft Entra ID and have permission to create users. Learn more about [authentication and authorization basics for Microsoft Graph](/graph/auth/auth-concepts).
When you select identity provider options in your user flows, you define the first-factor authentication methods for sign-up and sign-in. Second-factor verification methods for MFA are configured in the Microsoft Entra admin center under **Entra ID** > **Authentication methods**.
> | microsoft.directory/crossTenantAccessPolicy/allowedCloudEndpoints/update | Update allowed cloud endpoints of the cross-tenant access policy|
In the target tenant: Cross-tenant sync relies on the Microsoft Entra External ID billing model. To understand the external identities licensing model, see [MAU billing model for Microsoft Entra External ID](~/external-id/external-identities-pricing.md). You will also need at least one Microsoft Entra ID P1 license in the target tenant to enable auto-redemption.
In the target tenant: Cross-tenant sync relies on the Microsoft Entra External ID billing model. To understand the external identities licensing model, see [MAU billing model for Microsoft Entra External ID](~/external-id/external-identities-pricing.md). You will also need at least one Microsoft Entra ID P1 license in the target tenant to enable auto-redemption.
|Attribute|Type|Supported for filtering|Required by Bustle B2B Transport Systems|
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) of the target tenant.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) of the source tenant.
<br/>**Source tenant**
zone_pivot_groups: same-cloud-cross-cloud-synchronization
zone_pivot_groups: app-provisioning-cross-tenant-synchronization
zone_pivot_groups: app-provisioning-cross-tenant-synchronization
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Application Developer](~/identity/role-based-access-control/permissions-reference.md#application-developer).
Learn how to Migrate to version 2 of the CrossTenantAccessPolicy Microsoft Graph API.
Two options are available for migrating your existing policies to the new schema supported by the Microsoft Graph API:
author: henrymbuguakiarie
- `https://login.microsoftonline.com/te/<tenant name>.onmicrosoft.com/oauth2/authresp` <br>(where `<tenant name>` is your tenant name)
After you configured your identity provider, in this step you'll configure a new OpenID connect federation in the Microsoft Entra admin center.
With Microsoft Entra External ID, you can customize the claims that are issued in the SAML token for [B2B collaboration](what-is-b2b.md) users. When a user authenticates to the application, Microsoft Entra ID issues a SAML token to the app that contains information (or claims) about the user that uniquely identifies them. By default, this claim includes the user's user name, email address, first name, and family name.
1. Sign in to the Microsoft Entra admin center as at least an Application Administrator.
1. Switch to your *external* tenant: Select the **Settings** icon in the top menu, and then switch to your external tenant.
With guest users, you have auditing capabilities similar to with member users.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Reports Reader](/entra/identity/role-based-access-control/permissions-reference#reports-reader).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) using the appropriate combination of roles.
- Enable client signaling using Windows GPO. You need to check 'Enable firewall protection on MIcrosoft endpoints' and WDAC enablement. See [Block Chrome, Firefox and .NET applications like PowerShell](#block-chrome-firefox-and-net-applications-like-powershell).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least an [Groups Administrator](../../../../identity/role-based-access-control/permissions-reference.md#groups-administrator).
This is the third tutorial in the tutorial series that guides you on calling a protected web API using Microsoft Entra External ID.
Follow these prerequisite steps to add a trusted external organization (B2B) for the scenario.
Use an external Identity and Access Management (IAM) solution such as [Microsoft Identity Manager (MIM)](/microsoft-identity-manager/microsoft-identity-manager-2016) as a synchronization engine.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Organizational Branding Administrator](~/identity/role-based-access-control/permissions-reference.md#organizational-branding-administrator).
To configure the integration of Zscaler Internet Access ZSOne into Microsoft Entra ID, you need to add Zscaler Internet Access ZSOne from the gallery to your list of managed SaaS apps.
To configure the integration of Zscaler Internet Access Administrator into Microsoft Entra ID, you need to add Zscaler Internet Access Administrator from the gallery to your list of managed SaaS apps.
To configure the integration of Zscaler Internet Access ZSCloud into Microsoft Entra ID, you need to add Zscaler Internet Access ZSCloud from the gallery to your list of managed SaaS apps.
To configure the integration of Zscaler Internet Access ZSNet into Microsoft Entra ID, you need to add Zscaler Internet Access ZSNet from the gallery to your list of managed SaaS apps.
To configure the integration of Zscaler Internet Access ZSThree into Microsoft Entra ID, you need to add Zscaler Internet Access ZSThree from the gallery to your list of managed SaaS apps.
To configure the integration of Zscaler Internet Access ZSTwo into Microsoft Entra ID, you need to add Zscaler Internet Access ZSTwo from the gallery to your list of managed SaaS apps.
ai-usage: ai-assisted
Create a Conditional Access policy for end users or groups and deliver your security profile through Conditional Access Session controls. Conditional Access is the delivery mechanism for user and context awareness for Internet Access policies. To learn more about session controls, see [Conditional Access: Session](/azure/active-directory/conditional-access/concept-conditional-access-session).
The `RemoteNetworkHealthLogs` provide insights into the health of your remote network configured through Global Secure Access. Selecting this option doesn't add new logs to your workspace unless your organization is using Microsoft Entra Internet Access and Microsoft Entra Private Access to secure access to your corporate resources. For more information, see [Remote network health logs](../../global-secure-access/how-to-remote-network-health-logs.md).
ai-usage: ai-assisted
In this section, we create a Conditional Access policy that enforces the **Allow Social Networking** security profile for users that request access.
To configure the integration of Zscaler Private Access (ZPA) into Microsoft Entra ID, you need to add Zscaler Private Access (ZPA) from the gallery to your list of managed SaaS apps.
To configure the integration of Zscaler Private Access Administrator into Microsoft Entra ID, you need to add Zscaler Private Access Administrator from the gallery to your list of managed SaaS apps.
Learn how to enable Multi-Geo Capability for Microsoft Entra Private Access to optimize traffic flow from Microsoft Entra Clients to Microsoft Entra Apps.
Known limitations for Private Access include:
ai-usage: ai-assisted
ai-usage: ai-assisted
Conditional Access policies for Private Access are configured at the application level for each app. Conditional Access policies can be created and applied to the application from two places:
author: kenwith
Learn how Microsoft Entra private network connector groups work and how they're used by Microsoft Entra Private Access and application proxy.
ai-usage: ai-assisted
- [Microsoft Global Secure Access Deployment Guide for Microsoft Entra Private Access](gsa-deployment-guide-private-access.md)
ai-usage: ai-assisted
**To add Zscaler Private Access (ZPA) from the Microsoft Entra application gallery, perform the following steps:**
If you require that each resource has its own identity, or have resources that require a unique set of permissions and want the identity to be deleted as the resource is deleted, then you should use a system-assigned identity.
author: MicrosoftGuyJFlo
```bash
| Azure Cache for Redis | [Managed identity for storage accounts with Azure Cache for Redis](/azure/azure-cache-for-redis/cache-managed-identity) |
author: MicrosoftGuyJFlo
Reference table that maps application IDs to applications and their service principal usage from the sign-in logs.
From March 2026, Microsoft Entra ID will no longer support service principal-less authentication behavior. In this article, you'll learn how to prepare for the deprecation of service principal-less authentication. As a tenant administrator you'll verify access, create an enterprise application, and verify tokens.
You must act **before March 31, 2026**, to avoid authentication failure of applications.
author: rwike77
The Microsoft service principal sign-in logs capture service-to-service authentication events for Microsoft services in your tenant. While not necessary for security investigations, the information can be useful for understanding how your services are interacting with each other.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Cloud Application Administrator](~/identity/role-based-access-control/permissions-reference.md#cloud-application-administrator).
- If the API or service that exposes the app role grant to the managed identity already has a service principal in your Microsoft Entra tenant, skip this step.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com/). Check that you are in the tenant where your application is registered.
Learn how to configure an application to trust a managed identity in Microsoft Entra ID.
First, you'll need to verify that access by the named applications to the resources listed is necessary. The application’s sign-in activity can be reviewed by the resource tenant’s administrator via [sign-in logs](../identity/monitoring-health/concept-sign-ins.md). The service principal ID of an application making a service principal-less authentication is shown as `00000000-0000-0000-0000-000000000000` in the sign-in logs of the resource tenant.
Jason starts his assessment and signs in to [Microsoft Security Copilot](https://securitycopilot.microsoft.com/) or the Microsoft Entra admin center. In order to view application and service principal details, he signs in as at least a [Security Reader](/entra/identity/role-based-access-control/permissions-reference#security-reader) and needs an [Microsoft Entra role assignment](../identity/role-based-access-control/permissions-reference.md) of Application Administrator, Cloud Application Administrator, or similar Microsoft Entra administrator role that has permissions to manage application/workload identities in Microsoft Entra.
|Managed identities for Azure resources|Provide your Azure services with an automatically managed identity in Microsoft Entra ID that can authenticate any Microsoft Entra-supported authentication service, including Key Vault. For more information, see [What is managed identities for Azure resources?](~/identity/managed-identities-azure-resources/overview.md).|
You want to call Microsoft Graph for the web app. A safe way to give your web app access to data is to use a [system-assigned managed identity](~/identity/managed-identities-azure-resources/overview.md). A managed identity from Microsoft Entra ID allows App Service to access resources through role-based access control (RBAC), without requiring app credentials. After assigning a managed identity to your web app, Azure takes care of the creation and distribution of a certificate. You don't have to worry about managing secrets or app credentials.
This configuration registers an app in Microsoft Entra ID that represents the external API client and grants it permission to invoke the inbound provisioning API. The service principal client ID and client secret can be used in the OAuth client credentials grant flow.
This configuration registers an app in Microsoft Entra ID that represents the external API client and grants it permission to invoke the inbound provisioning API. The service principal client ID and client secret can be used in the OAuth client credentials grant flow.
Create a location based Conditional Access policy that applies to service principals.
- If the API or service that exposes the app role grant to the managed identity already has a service principal in your Microsoft Entra tenant, skip this step. For example, in the case that you want to grant the managed identity access to the Microsoft Graph API.
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../role-based-access-control/permissions-reference.md#search-administrator).
A managed identity from Microsoft Entra ID allows App Service to access resources through role-based access control (RBAC), without requiring app credentials. After assigning a managed identity to your web app, Azure takes care of the creation and distribution of a certificate. People don't have to worry about managing secrets or app credentials.
These logs are only available by configuring diagnostic settings in Microsoft Entra to route the logs to an endpoint of your choice. For full guidance on this process, see [Configure diagnostic settings](howto-configure-diagnostic-settings.md).
This article tracks the changes in each released version of the Global Secure Access client for Windows.
- Only the Global Secure Access client for Windows, starting with version 1.8.239.0, is aware of Universal CAE. On other platforms, the Global Secure Access client uses regular access tokens.
To begin, we configure and assign groups by creating a Microsoft Entra ID group, onboard it as a PIM managed group, update group assignments with eligible membership, and specify access for user and devices.
1. In Microsoft Entra admin center, navigate to **Global Secure Access** > **Settings** > **Session management**.
To see source IP restoration in action, administrators can take the following steps.
Known limitations for access controls include:
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
author: kenwith
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
manager: femila
author: kenwith
author: kenwith
ai-usage: ai-assisted
ai-usage: ai-assisted
Administrators can create policies that target specific network locations as a signal along with other conditions in their decision making process. They can include or exclude these network locations as part of their policy configuration. These network locations might include public IPv4 or IPv6 network information, countries/regions, unknown areas that don't map to specific countries/regions, or [Global Secure Access' compliant network](../../global-secure-access/how-to-compliant-network.md).
1. User requests a DNS query for `app.contoso.com`. If not cached locally, the DNS query is sent to the DNS proxy at the GSA edge.
manager: femila
manager: femila
> When you sign up for the Netskope ATP preview, you are implicitly signing up for the TLS preview.
manager: femila
A high-level Private DNS flow for Windows clients is shown in the following diagram.
- `C:\Program Files\Global Secure Access Client\GlobalSecureAccessEngineService.exe`
A Microsoft Entra documentation page was updated: Name Resolution.
- [Video: 425 Show "Is Global Secure Access Right for You?"](https://youtu.be/2OSbu7d8IOU)
author: kenwith
Step-by-step guide to configure Microsoft Entra Private DNS with Quick Access for secure and efficient internal DNS query resolution in enterprise environments.
:::image type="content" source="media/concept-private-name-resolution/image1.png" alt-text="Screenshot of a network diagram showing the high-level Private DNS flow for Windows clients.":::
- [Cisco](concept-cisco-coexistence.md)
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
author: kenwith
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](../identity/role-based-access-control/permissions-reference.md#security-administrator).
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) as at least a [Security Administrator](/azure/active-directory/roles/permissions-reference#security-administrator).
To access deployment logs:
**From Microsoft Entra monitoring and health:**
1. In the logs, look for a **Status** of `302`. This row shows universal tenant restrictions being applied to the traffic.
Connection logs provide a summary of all associated transactions, including the total transaction count and blocked transactions, allowing for quick identification of any blocked activity.
1. Click **Review + create**, then **Create**.
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
ai-usage: ai-assisted
You can export the Global Secure Access traffic logs (preview) to an endpoint for further analysis and alerting. This integration is configured in Microsoft Entra diagnostic settings.
Discover how to use advanced diagnostics to resolve issues with the Global Secure Access mobile client for Android and iOS.
Troubleshoot the Global Secure Access client using the health check tab in the advanced diagnostics utility.
ai-usage: ai-assisted
ai-usage: ai-assisted
1. Sign in to the [Microsoft Entra admin center](https://entra.microsoft.com) with an account which has the [Global Secure Access Administrator](../identity/role-based-access-control/permissions-reference.md#global-secure-access-administrator) and [Conditional Access Administrator](../identity/role-based-access-control/permissions-reference.md#conditional-access-administrator) role activated.
Conditional Access policies for per-app access are configured at the application level for each app. Conditional Access policies can be created and applied to the application from two places:
author: kenwith
author: kenwith
1. [Install a private network connector](how-to-configure-connectors.md) in a private network that has outbound connectivity to the destination web application. A good option is to host the connector in an Azure Virtual Network where you control the outbound egress IP. We recommend that you install two or more connectors for resiliency and high availability.
ai-usage: ai-assisted
ai-usage: ai-assisted
:::image type="content" source="media/deployment-scenario-remote-access/application-segment.png" alt-text="Screenshot of Create Global Secure Access application, Create application segment.":::
- Secure and monitor Microsoft Traffic for on-site and remote employees.
The following example policy targets all users except for your break-glass accounts and guest/external users, requiring multifactor authentication, device compliance, or a Microsoft Entra hybrid joined device for Global Secure Access internet traffic.
|445 |UDP/TCP |Replication, User and Computer Authentication, Group Policy |
A significant percentage of internet traffic is encrypted. By terminating Transport Layer Security (TLS) at the edge, Global Secure Access inspects and applies security policies to decrypted traffic, enabling threat detection, content filtering, and granular access controls.
In today's rapidly evolving digital landscape, organizations require robust, and unified solutions to ensure secure and seamless connectivity. Microsoft and Zscaler offer complementary Secure Access Service Edge (SASE) capabilities that, when integrated, provide enhanced security and connectivity for diverse access scenarios.
author: MicrosoftGuyJFlo